TRIPPLITE EN1111 Product Data Sheet
Wireless Access Point Enclosure with Lock Surface-Mount, ABS Construction, 11 x 11 in.
MODEL NUMBER: EN1111
Locking enclosure protects your Wi-Fi access point against theft, damage or tampering inside offices,
dorms and other indoor areas.
Highlights
●
Designed for Cisco WAPs, but
accommodates equipment from
most vendors
●
Rugged ABS plastic housing
protects router/modem/WAP
from theft or tampering
●
Transparent to wireless signals,
ensuring an optimum Wi-Fi
signal in all directions
●
Swings away from wall or ceiling
on hinge to allow easy access to
equipment and cabling
●
Comes fully assembled and
ready for wall- or ceilingmounting using included
hardware
Features
Wall-Mount Enclosure Secures and Organizes Your Router/Modem or Wireless Access Point
Protect your indoor router/modem or Wi-Fi access point by installing it inside this SmartRack® Wireless
Access Point Enclosure made from impact-resistant UL 94-HB Classified ABS plastic. It’s ideal for offices,
dorms, hotels, classrooms, retail locations and other indoor areas where you need to keep Wi-Fi
equipment secure, organized and out of the way.
Accommodates a Wide Range of Equipment, Including Cisco WAPs, up to 542 in.³
Though the EN1111 is designed specifically to protect Cisco Wi-Fi access points, it will also house most
other enclosures up to 542 cubic inches (891 cubic centimeters). While rugged enough to keep your
equipment safe inside, it’s also transparent to wireless signals, ensuring strong Wi-Fi coverage.
Convenient knockout ports allow easy cable routing through the enclosure and reduce cable clutter.
Locks Securely to Help Prevent Damage, Tampering or Theft
This Wi-Fi access point enclosure swings away from the wall or ceiling on a sturdy hinge, allowing easy
access to equipment and cabling during installation and maintenance. It locks securely with the included
keys to protect its contents against theft and tampering. Vents on each end allow cool air to flow freely
through the enclosure to prevent equipment from overheating.
Easy to Mount with the Included Hardware
The EN1111 comes fully assembled and ready for horizontal or vertical mounting on a wall or ceiling with
the included installation hardware. It is designed for Cisco WAPs, but the included universal T-bar bracket
will accommodate a wide variety of equipment from other brands. Pre-cut openings allow for precise
positioning over wall outlets.
Applications
●
Protect a router/modem or
wireless access point inside a
classroom, office, hotel, store,
dorm or other indoor space from
damage, theft or tampering
Package Includes
●
Wireless Access Point
Enclosure with Lock, 11 x 11 in.
●
(2) M6 screws, 1 in.
●
(2) M6 trusshead screws, 0.25
in.
●
(4) M6 flathead screws, 0.25 in.
●
Cable tie
●
(4) Nylon spacers
●
T-bar bracket
●
(2) Keys
●
Installation guide
Specifications
1 / 2
OVERVIEW
UPC Code 0373322178
PHYSICAL
Rack Height 0U
Maximum Device Depth (in.) 4.4
Maximum Device Depth (cm) 11.18
Shipping Dimensions (hwd / in.) 12.08 x 11.85 x 5.47
Shipping Dimensions (hwd / cm) 30.70 x 30.10 x 13.90
Shipping Weight (lbs.) 4.19
Shipping Weight (kg) 1.90
Unit Dimensions (hwd / in.) 11.1 x 11.1 x 4.4
Unit Dimensions (hwd / cm) 28.2 x 28.2 x 11.2
Unit Dimensions (in.) 11 x 11
Unit Dimensions (cm) 28 x 28
Unit Weight (lbs.) 3.3
Unit Weight (kg) 1.50
Color White
Maximum Device Depth (mm) 112
SPECIAL FEATURES
Built-in Cable Management No
WARRANTY
Product Warranty Period
(Worldwide)
5-year limited warranty
© 2019 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2 / 2
Loading...