• Charge up to 10 tablets, smartphones or other mobile devices
• Doubles as a USB or AC charger and storage unit, providing space to neatly
organize your devices as they charge
• Removable dividers customize the unit’s storage space according to the number
and size of devices being charged
CSD1006USB Model
• BC1.2 rapid charging with a single port is capable of providing up to 5V 2.4A
• Overcurrent protection prevents devices from pulling more power than the charger
is capable of supporting
• Overcharging protection stops charging when a device battery is full
CSD1006AC Model
• 2880-joule surge suppression rating
• EMI/RFI noise filtering
• Diagnostic LED indicates Protected (green) and Grounded (red)
• Automatic shutoff cuts power to outlets when the protection circuit has been
compromised
• $25,000 Ultimate Lifetime Insurance for connected equipment
(U.S., Canada, and Puerto Rico only)
Package Contents
CSD1006USB
• USB Charger
• External Power Supply with 5-15P
Plug (Input: 100V-240V, 50/60 Hz;
Max Output: 12V, 8A)
• Enclosure unit with locking lid
• USB charger enclosure mount
• Keys
• Combination cable lock
• Owner’s Manual
17-01-037-93362C-EN.indd 21/5/2017 5:07:12 PM
CSD1006AC
• 10-Outlet AC Surge Protector
• Enclosure unit with locking lid
• Keys
• Combination cable lock
• Owner’s Manual
2
Optional Accessories
• M100-Series USB to Lightning™ Cables
• M110-Series USB to Apple® 30-Pin Cables
Important Safety Warnings
• Always read the safety instructions carefully.
• Keep these instructions for future reference.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other equipment (including amplifiers) that produces heat.
• Unplug the unit when unused for extended periods of time.
• To reduce the risk of fire or electric shock, do not expose this unit to rain or
moisture, including any dripping or splashing.
• Objects filled with liquids, such as vases, should never be placed on or near the
unit.
• The unit presents an electric shock hazard; do not open.
• The outlet used to power the unit should be easily accessible and located near
the equipment.
• The power supply cord is for indoor use only.
•
Maximum ambient temperature around the adapter must not exceed 104°F (40°C).
• The power supply cord’s plug and inlet are used as the disconnect device for
the unit and its connected peripherals. The power supply cord should be easily
accessible during operation.
• Refer to the marking label on the unit for input and output ratings. Do not
overload the power supply.
• Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or
to significantly affect its safety or effectiveness is not recommended.
3
17-01-037-93362C-EN.indd 31/5/2017 5:07:12 PM
Setup
Both Models
1
After removing the protective packing, locate the separate box at the
rear of the enclosure unit containing the USB or AC charger. Remove the
USB charger or surge protector from its box.
2
Remove the enclosure lid by pushing out and lifting up.
4
17-01-037-93362C-EN.indd 41/5/2017 5:07:13 PM
Setup
3
Lift and remove the storage shelf from the enclosure.
4
Attach the charging unit to the enclosure:
CSD1006USB Model
Slide the included mounting bracket onto the enclosure’s rear slots.
A
5
17-01-037-93362C-EN.indd 51/5/2017 5:07:13 PM
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.