Tripp-Lite BCPERS300 Specifications

BC Personal 120V 300VA 180W Standby UPS,
Tower, 3 Outlets

MODEL NUMBER: BCPERS300

Description

Tripp Lite's BCPERS300 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety

of consumer and electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected

equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge suppression prevents connected equipment

damage.

Features

BCPERS300 small tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges

300VA / 180 watt UPS output capacity

Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss

and system downtime for connected equipment

6.3 minutes runtime at 100% load(180 watts), 16.8 minutes runtime at 50% load(90 watts)

17 minutes runtime for a desktop computer system consuming 80 watts continuous

3 built-in NEMA 5-15R UPS supported outlets

NEMA 5-15P input connection with 6ft / 1.8m line cord

Network grade AC surge and lightning protection is available from all outlets

Front panel LEDs indicate line mode and battery mode status

Hot swappable user battery replacement

Optional PDUB15 bypass PDU enable hot-swappable UPS replacement with no disruption to connected equipment

Small tower housing supports desk or floor placement

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 300

Highlights

300VA tower 120V standby UPS

Maintains AC output during power

failures

NEMA 5-15P input plug and 3

NEMA 5-15R outlets

Package Includes

BCPERS300 UPS System

Instruction manual

1 / 4

Output Watt Capacity (Watts) 180

Nominal Output Voltage(s)
Supported

110V; 115V; 120V

Nominal Voltage Details 115v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Battery
Mode)

+/- 5%

Output Receptacles (3) 5-15R

Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets)

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) PWM sine wave

INPUT

Rated input current (Maximum Load) 2.8A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-15P

UPS Input Cord Length (ft.) 6

UPS Input Cord Length (m) 1.8

Recommended Electrical Service 15A 120V

Input Phase Single-Phase

BATTERY

Full Load Runtime (min.) 6.3 min. (180w)

Half Load Runtime (min.) 16.8 min. (90w)

DC System Voltage (VDC) 12

Battery Access Battery access door

Expandable Runtime No

USER INTERFACE, ALERTS & CONTROLS

Switches 1 built-in slider switch for main power off/on control

LED Indicators 2 LEDs indicate line power, battery power status

SURGE / NOISE SUPPRESSION

UPS AC Suppression Joule Rating 720

UPS AC Suppression Response
Time

Instantaneous

EMI / RFI AC Noise Suppression Yes

2 / 4