Tripp Lite B320-4X1-HH-K1, B320-4X1-HH-K2, B320-4X1-MH, B320-4X1-MHB-K, B320-4X1-MHE-K Owner’s Manual

Owner’s Manual

4-Port

Presentation Switch

Model: B320-4X1-HH-K1, B320-4X1-HH-K2,

B320-4X1-MH, B320-4X1-MHB-K,

B320-4X1-MHE-K

Español 19 • Français 37 • Русский 55

WARRANTY REGISTRATION

Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Copyright © 2020 Tripp Lite. All rights reserved.

1

20-05-025-933CA4.indb 120-05-025-933CA4.indb 1 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Package Contents

• B320-4X1-Series Presentation Switch

• IR Remote Control

• IR Receiver Cable, 5 ft.

• International Power Supply (Input: 100–240V; Output: 24V 1A)

• (x4) International Plug Adapters (North America, U.K., Europe,
Australia)

• Mounting Hardware

• Owner’s Manual

Optional Accessories

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P569-XXX-CERT Series High-Speed HDMI 2.0 Cables

• P580-Series DisplayPort Cables with Latches

• P502-XXX-SM 15-Pin Low-Profile VGA Coaxial Cables

• U420-Series USB-C 3.1 Gen 1/2 Cables

• P312-Series 3.5 mm Audio Cables

2

20-05-025-933CA4.indb 220-05-025-933CA4.indb 2 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Product Features

B320-4X1-HH-K1

4-Port 4K @ 60 Hz HDMI over Cat6 PoC Presentation Switch/Extender Kit, 50 ft.

• Connects up to 4 HDMI sources to a single HDMI display up to 50 ft.
away via Cat6 cabling.

• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.

• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.

• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.

• Supports true 4K resolutions up to 3840 x 2160 @ 60 Hz with 4:4:4
chroma subsampling.

• HDMI 2.0 and HDCP 2.2 compliant.

• Plug-and-play operation with no software required for easy, immediate
installation.

B320-4X1-HH-K2

4-Port 4K @ 60 Hz HDMI over Cat6 PoC Presentation Switch/Extender Kit, 125 ft.

• Connects up to 4 HDMI sources to a single HDMI display up to 125 ft.
away via Cat6 cabling.

• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.

• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.

• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.

• Supports true 4K resolutions up to 3840 x 2160 @ 60 Hz with 4:4:4
chroma subsampling.

• HDMI 2.0 and HDCP 2.2 compliant.

• Plug-and-play operation with no software required for easy, immediate
installation.

3

20-05-025-933CA4.indb 320-05-025-933CA4.indb 3 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Product Features

B320-4X1-MH

4-Port Multi-Format Presentation Switch

• Connects up to 4 sources to a single HDMI display.

• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.

• Supports true 4K HDMI, DisplayPort and USB-C™ resolutions up to
4096 x 2160 @ 60 Hz with 4:4:4 chroma subsampling.

• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.

• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*

• Plug-and-play operation with no software required for easy, immediate
installation.

*10W is reserved for the functionality of the USB Type-C™ chipset system.

B320-4X1-MHB-K

4-Port Multi-Format PoC Presentation Switch/Extender Kit, 50 ft.

• Connects up to 4 sources to a single HDMI display up to 50 ft. away
via Cat6 cabling.

• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.

• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.

• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.

• Supports true 4K HDMI, DisplayPort and USB-C resolutions up to 3840
x 2160 @ 60 Hz with 4:4:4 chroma subsampling.

• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.

• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*

• Plug-and-play operation with no software required for easy, immediate
installation.

*10W is reserved for the functionality of the USB Type-C chipset system.

4

20-05-025-933CA4.indb 420-05-025-933CA4.indb 4 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Product Features

B320-4X1-MHE-K

4-Port Multi-Format PoC Presentation Switch/Extender Kit, 125 ft.

• Connects up to 4 sources to a single HDMI display up to 125 ft. away
via Cat6 cabling.

• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.

• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.

• Remote receiver unit features built-in equalization (EQ) control and
auto EDID image adjustment.

• Supports true 4K HDMI, DisplayPort and USB-C resolutions up to 3840
x 2160 @ 60 Hz with 4:4:4 chroma subsampling.

• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.

• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*

• Plug-and-play operation with no software required for easy, immediate
installation.

*10W is reserved for the functionality of the USB Type-C chipset system.

5

20-05-025-933CA4.indb 520-05-025-933CA4.indb 5 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Mounting Instructions

These 4-port presentation switches include hardware for mounting on a
wall, pole or 19-inch rack. The following images illustrate how the included
hardware can be attached for different installations.

Note: The models shown below are for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting
options for all B320-Series switches are the same.

Wall-mount

19” Rack-mount Pole-mount

6

20-05-025-933CA4.indb 620-05-025-933CA4.indb 6 10/21/2020 9:26:37 AM10/21/2020 9:26:37 AM

Installation

Refer to the following steps and diagram to set up your 4-port presentation
switch installation.

Installation Instructions for B320-4X1-HH-K1 &
B320-4X1-HH-K2

Notes:

1. Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

2. To achieve maximum distance and performance, use 24 AWG solid­wire Cat6 cables. Using stranded-wire Cat6 cable or cable with a gauge
(AWG) size higher than 24 AWG will result in shorter extension distance.
Higher-gauge cabling, such as 26 AWG, has more limited transmission
capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6
cables are made with 24 AWG solid-wire cabling.

3. External power is not required for remote receiver units, due to PoC
technology incorporated in the transmitter units.

Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz

B320-4X1-HH-K1
& B320-4X1-HH-K2
extender kit



Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz



Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz



RS-232 cable



SWITCH RECEIVER

7

20-05-025-933CA4.indb 720-05-025-933CA4.indb 7 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

1. Make sure all equipment in the installation is powered off.

2. Connect the HDMI source to INPUT 1 on the presentation switch with a
user-supplied HDMI cable.

3. Repeat Step 2 for INPUT ports 2, 3 and 4.

4. Connect the RJ45 port on the presentation switch to the RJ45 port on
the remote receiver with a user-supplied Cat6 cable. Note: Maximum

transmission distance via Cat6 cabling for the B320-4X1-HH-K1 and
B320-4X1-HH-K2 is 50 ft. and 125 ft., respectively.

5. Connect the remote receiver’s HDMI port to a display with a user­supplied HDMI cable.

6. (Optional) If the B320-4X1-Series switch is not in line of sight, connect the
included IR receiver cable to the IR-IN port for more reliable IR reception.

7. (Optional) If you wish to control the B320-4X1-Series switch from your
computer, connect a user-supplied DB9 cable to the RS-232 port. See
RS-232 Commands for more information.

8. Turn on the power to all connected devices in the installation. Then,
connect the included external power supply to the switch transmitter unit.

9. The Power LED will illuminate green, indicating the unit is receiving
sufficient power, and Input LEDs will illuminate orange, indicating a
signal is being received from the sources.

8

20-05-025-933CA4.indb 820-05-025-933CA4.indb 8 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

Installation Instructions for B320-4X1-MH,
B320-4X1-MHB-K & B320-4X1-MHE-K

Notes:

1. Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

2. To achieve maximum distance and performance, use 24 AWG solid­wire Cat6 cables. Using stranded-wire Cat6 cable or cable with a gauge
(AWG) size higher than 24 AWG will result in shorter extension distance.
Higher-gauge cabling, such as 26 AWG, has more limited transmission
capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6
cables are made with 24 AWG solid-wire cabling.

3. External power is not required for remote receiver units due to PoC
technology incorporated in the transmitter units.

B320-4X1-MH switch

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz



Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz



Up to 15 ft. (4.5 m) VGA cable at 1080p/60Hz



Up to 6 ft. (1.83 m) USB Type-C cable at 4K/60Hz



Up to 30 ft. (9 m) HDMI 2.0 cable at 4K/60Hz



RS-232 cable



9

20-05-025-933CA4.indb 920-05-025-933CA4.indb 9 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

B320-4X1-MHB-K
& B320-4X1-MHE-K
extender kit

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz



Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz



Up to 15 ft. (4.5 m) VGA cable at 1080p/60Hz



Up to 6 ft. (1.83 m) USB Type-C cable at 4K/60Hz



Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz



Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz



RS-232 cable



SWITCH RECEIVER

1. Make sure all equipment in the installation is powered off.

2. Connect the HDMI source to HDMI IN with a user-supplied HDMI cable.

3. Connect the DisplayPort source to DP IN with a user-supplied
DisplayPort cable.

4. Connect the USB-C source to TYPE-C IN with a user-supplied USB-C cable.

5. (Optional) Connect your USB-C source’s power adapter to CHARGE IN,
supporting up to 100W (20V 5A) and supplying up to 90W of power to
your USB-C source.

6. Connect the VGA source to VGA IN with a user-supplied VGA cable.
Then connect the VGA source’s Audio Out port to VGA AUDIO with a
user-supplied 3.5 mm audio cable. Note: 15-pin VGA cables must be

used. 14-pin VGA cables will not work.

10

20-05-025-933CA4.indb 1020-05-025-933CA4.indb 10 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

7. Connect the HDMI Output port to a display with a user-supplied HDMI cable.

8. B320-4X1-MHB-K & B320-4X1-MHE-K only: Connect the RJ45 port
on the switch transmitter to the RJ45 port on the remote receiver with
a user-supplied Cat6 cable. Note: Maximum transmission distance via

Cat6 cabling for the B320-4X1-MHB-K and B320-4X1-MHE-K is 50 ft.
and 125 ft., respectively. Then, connect the remote receiver’s HDMI port

to a display with a user-supplied HDMI cable.

9. (Optional) If the B320-4X1-Series switch is not in line of sight, connect the
included IR receiver cable to IR-IN for more reliable IR reception.

10. (Optional) If you wish to control the B320-4X1-Series switch from your
computer, connect a user-supplied DB9 cable to the RS-232 port. See
RS-232 Commands for more information.

11. Turn on the power to all connected devices in the installation. Then,
connect the included external power supply to the switch transmitter unit.

12. The Power LED will illuminate green, indicating the unit is receiving
sufficient power, and Input LEDs will illuminate orange, indicating a
signal is being received from the sources.

Locking Front-Panel Pushbuttons

Users can lock the front-panel pushbuttons to prevent accidental changes or
button clicks. To lock the front-panel pushbuttons:

1. Press Input 1 and 2 simultaneously and hold for 5 seconds.

2. All four Input LEDs (1-4) will blink for 5 seconds, then only the selected
source LED will turn orange.

3. Front-panel pushbuttons are now inoperable.

To unlock the front-panel pushbuttons:

1. Press Input 1 and 2 simultaneously and hold for 5 seconds.

2. All four Input LEDs (1-4) will blink for 5 seconds, then only the selected
source LED will turn orange.

3. Front-panel pushbuttons are now operable again.

11

20-05-025-933CA4.indb 1120-05-025-933CA4.indb 11 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

RS-232 Serial Control Installation

1. Please make sure your Terminal Emulator Software is running.

2. Set up your serial COM port. Open your software, click Setup and select
Serial Port from the dropdown menu.

3. Select the COM port into which the DB9 is connected. If you use Keyspan®,
it will automatically assign the COM port for you. Please make sure to select:

• Baud Rate: 57600

• Data: 8 bit

• Parity: none

• Stop: 1 bit

• Flow control: None and click OK.

12

20-05-025-933CA4.indb 1220-05-025-933CA4.indb 12 10/21/2020 9:26:38 AM10/21/2020 9:26:38 AM

Installation

4. Configure your software to allow input control. Click Setup and select
Terminal from the dropdown menu.

5. Select LF on Receive in New-Line. Click the box to activate Local Echo.
Enter the command and click OK.

13

20-05-025-933CA4.indb 1320-05-025-933CA4.indb 13 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Installation

RS-232 Commands

Commands for Serial Control

Command Meaning

Sw1 x1 Routed to Output1, Output n to input [x1]
Sw2 x1 Routed to Output1, Output n to input [x1]
Sw3 x1 Routed to Output1, Output n to input [x1]
Sw4 x1 Routed to Output1, Output n to input [x1]
PWD Stands for Power On/Off
STE State of the output

Important note control command:

Only one command can be issued at a time. You must wait for the switch to
accept and finish the first command before sending a second. If a second
command is sent/issued before the first is completed, the switch will ignore the
second command.

14

20-05-025-933CA4.indb 1420-05-025-933CA4.indb 14 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Installation

Routing Functions

Command:

• swN M

Variations:

• N: stands for Connect Output N, default 1

• M: switch to input M

Response:

• CMD: swN M

Response Example:

• sw1 a

• CMD: sw1 A

Output 1, Select Input A

• sw2 b

• CMD: sw2 B

Output 2, Select Input B

Power Functions

Command: pwd
Response: PW

Stands for Power On/Off

• pwd

• CMD: PWD

Special Commands

Command: ste
Response: OutputN M[STATE]
Variations:

• N: Output N

• M: Input M

• [STATE]:
o [Signal] signal on from input
o [Idle] no signal from input

State of the output channel

• STE

• CMD: STATE

• Output1 A[Idle]

• Output2 A[Idle]

15

20-05-025-933CA4.indb 1520-05-025-933CA4.indb 15 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Specifications

HDMI, DP, VGA +

3.5mm, 2x USB-C

HDMI, DP, VGA +

3.5mm, 2x USB-C

HDMI/DP/USB-C:

HDMI/DP/USB-C:

3840 x 2160 @ 60

Hz; VGA: 1920 x

1080 @ 60 Hz

3840 x 2160 @ 60

Hz; VGA: 1920 x

1080 @ 60 Hz

3.5mm, 2x USB-C

4x HDMI 4x HDMI HDMI, DP, VGA +

Models B320-4X1-HH-K1 B320-4X1-HH-K2 B320-4X1-MH B320-4X1-MHB-K B320-4X1-MHE-K

Input Ports

(Female)

20-05-025-933CA4.indb 1620-05-025-933CA4.indb 16 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

RJ45 RJ45 HDMI RJ45 RJ45

Output

Ports

(Female)

50 ft. 125 ft. N/A 50 ft. 125 ft.

RX Max

Distance

HDMI/DP/USB-C:

4096 x 2160 @

60 Hz; VGA: 1920 x

1080 @ 60 Hz

HDMI: 3840 x

2160 @ 60 Hz

HDMI: 3840 x 2160

@ 60 Hz

Max

Resolution

16

32 to 104°F 32 to 104°F 32 to 104°F 32 to 104°F 32 to 104°F

Operating

Temp

5 to 122°F 5 to 122°F 5 to 122°F 5 to 122°F 5 to 122°F

Storage

Temp

N/A N/A 20V 5A (100W) 20V 5A (100W) 20V 5A (100W)

PD 3.0

Charging

Warranty and Product Registration

1-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable
instructions, to be free from original defects in material and workmanship
for a period of one (1) year from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller
will repair or replace the product, at its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE
RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER
MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY
EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states
do not allow limitations on how long an implied warranty lasts, and some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have other rights which
vary from jurisdiction to jurisdiction.)

Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.

WARNING: The individual user should take care to determine prior to use
whether this device is suitable, adequate or safe for the use intended.
Since individual applications are subject to great variation, the manufacturer
makes no representation or warranty as to the suitability or fitness of these
devices for any specific application.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!*

*No purchase necessary. Void where prohibited. Some restrictions apply.
See website for details.

17

20-05-025-933CA4.indb 1720-05-025-933CA4.indb 17 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Warranty and Product Registration

WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive
and implementing regulations, when customers buy new electrical and
electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like
basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately
becomes waste

Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is not
recommended.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

18

20-05-025-933CA4.indb 1820-05-025-933CA4.indb 18 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

20-05-025 93-3CA4_RevA

Manual del Propietario

Switch de

Presentación

de 4 Puertos

Modelo: B320-4X1-HH-K1, B320-4X1-HH-K2,

B320-4X1-MH, B320-4X1-MHB-K,

B320-4X1-MHE-K

English 1 • Français 37 • Русский 55

MÁS DE

AÑOS

1111 W. 35th Street, Chicago, IL 60609, EE UU • tripplite.com/support

Copyright © 2020 Tripp Lite. Todos los derechos reservados.

19

20-05-025-933CA4.indb 1920-05-025-933CA4.indb 19 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Contenido del Empaque

• Switch de Presentación Serie B320-4X1

• Control Remoto IR

• Cable Receptor IR, 1.52 m [5 pies]

• Fuente de Alimentación Internacional (Entrada: 100V ~ 240V);
Salida: 24V 1A)

• (x4) Adaptadores de Clavijas Internacionales (Norteamérica, Reino
Unido, Europa, Australia)

• Accesorios de Instalación

• Manual del Propietario

Accesorios Opcionales

• Cables Patch Cat6 de Alambre Sólido 24 AWG de la Serie N202

• Cables HDMI 2.0 de Alta Velocidad Serie P569-XXX-CERT

• Cables de seguridad DisplayPort de la Serie P580

• P502-XXX-SM – Cables Coaxiales VGA de Bajo Perfil de 15 Pines

• Cables USB C 3.1 Gen 1/2 Serie U420

• Cables de Audio de 3.5 mm Serie P312

20

20-05-025-933CA4.indb 2020-05-025-933CA4.indb 20 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Características del Producto

B320-4X1-HH-K1

Juego de Switch Extensor de Presentación de 4 Puertos 4K @ 60 Hz HDMI
sobre Cat6 PoC, 15.24 m [50 pies]

• Conecta hasta 4 fuentes HDMI a una sola pantalla HDMI alejada hasta

15.24 m [50 pies] mediante cableado Cat6.

• Alterna entre 4 fuentes usando los botones en el panel frontal, el
control remoto IR o los comandos RS-232.

• La tecnología PoC proporciona energía al receptor mediante cable Cat6.

• La unidad receptora remota cuenta con un control de ecualización [EQ]
incorporado y ajuste de imagen EDID automático.

• Soporta resoluciones 100% 4K de hasta 3840 x 2160 @ 60 Hz con
submuestro cromático 4:4:4

• Cumple con HDMI 2.0 y HDCP 2.2.

• Operación de conectar y usar sin necesidad de software para una
instalación fácil e inmediata.

B320-4X1-HH-K2

Juego de Switch Extensor de Presentación de 4 Puertos 4K @ 60 Hz HDMI
sobre Cat6 PoC, 38.1 m [125 pies]

• Conecta hasta 4 fuentes HDMI a una sola pantalla HDMI alejada hasta

38.1 m [125 pies] mediante cableado Cat6.

• Alterna entre 4 fuentes usando los botones en el panel frontal, el
control remoto IR o los comandos RS-232.

• La tecnología PoC proporciona energía al receptor mediante cable Cat6.

• La unidad receptora remota cuenta con un control de ecualización [EQ]
incorporado y ajuste de imagen EDID automático.

• Soporta resoluciones 100% 4K de hasta 3840 x 2160 @ 60 Hz con
submuestro cromático 4:4:4

• Cumple con HDMI 2.0 y HDCP 2.2.

• Operación de conectar y usar sin necesidad de software para una
instalación fácil e inmediata.

21

20-05-025-933CA4.indb 2120-05-025-933CA4.indb 21 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM

Características del Producto

B320-4X1-MH

Switch de Presentación Multiformato de 4 Puertos

• Conecta hasta 4 fuentes a una sola pantalla HDMI

• Alterna entre 4 fuentes usando los botones en el panel frontal, el
control remoto IR o los comandos RS-232.

• Soporta resoluciones 100% HDMI 4K, DisplayPort y USB C™ de hasta
4096 x 2160 @ 60 Hz con submuestreo cromático 4:4:4.

• Soporta resoluciones de video VGA 1080p hasta 1920 x 1080, @ 60 Hz.

• El puerto USB C PD 3.0 soporta hasta 100W (20V 5A) y proporciona
90W de potencia de carga a la fuente USB C.*

• Operación de conectar y usar sin necesidad de software para una
instalación fácil e inmediata.

*10W están reservados para la funcionalidad del sistema de chipset USB Tipo C™.

B320-4X1-MHB-K

Juego de Switch Extensor de Presentación PoC de Formato Múltiple de 4
puertos, 15.24 m [50 pies]

• Conecta hasta 4 fuentes a una sola pantalla HDMI alejada hasta 15.24
m [50 pies] mediante cableado Cat6.

• Alterna entre 4 fuentes usando los botones en el panel frontal, el
control remoto IR o los comandos RS-232.

• La tecnología PoC proporciona energía al receptor mediante cable
Cat6.

• La unidad receptora remota cuenta con un control de ecualización [EQ]
incorporado y ajuste de imagen EDID automático.

• Soporta resoluciones 100% HDMI 4K, DisplayPort y USB C™ de hasta
3840 x 2160 @ 60 Hz con submuestreo cromático 4:4:4.

• Soporta resoluciones de video VGA 1080p hasta 1920 x 1080, @ 60 Hz.

• El puerto USB C PD 3.0 soporta hasta 100W (20V 5A) y proporciona
90W de potencia de carga a la fuente USB C.*

• Operación de conectar y usar sin necesidad de software para una
instalación fácil e inmediata.

*10W está reservado para la funcionalidad del sistema de chipset USB Tipo C.

22

20-05-025-933CA4.indb 2220-05-025-933CA4.indb 22 10/21/2020 9:26:39 AM10/21/2020 9:26:39 AM