Page 1
HDMI over IP Extender Kit with Built-in 2-Port
Splitter, RS-232 Serial and IR Control, 1080p @
60 Hz, 328 ft. (100 m), TAA
MODEL NUMBER: B160-201-HSI
Converts HDMI audio/video to an IP-based signal that is transmitted point-to-point to a display 328 ft.
away via Cat5e/6 cable or through a dedicated Ethernet network switch.
Description
The B160-201-HSI 2-Port HDMI over IP Transmitter/Receiver/Extender Kit extends and distributes HDMI
audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to
328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By
adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue
extending the distance between source and display up to 328 feet per switch. Two HDMI outputs on the
receiver allow the connection of two displays.
Highlights
●
Units connect point-to-point
without a switch up to 328 ft.
●
Supports video resolutions up to
1920 x 1080 (1080p) @ 60 Hz
●
Dual HDMI outputs on receiver
for connecting 2 displays
●
Plug and play—no software or
drivers required
Package Includes
●
Transmitter unit
●
Receiver unit
●
(2) External power supplies
(Input: 100–240V, 50/60 Hz,
0.5A; Output: 5V 2A)
●
Plug adapters for U.S., U.K.,
Europe and Australia
●
IR-In cable
●
IR-Out cable
●
3.5 mm to DB9 adapter cable
(M/M)
●
Mounting hardware
●
Owner’s manual
Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by including dedicated
managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp
Lite’s NSS-G16D2. With a compatible B160-Series receiver, you can send the HDMI video source to any
analog or digital display, including VGA and DisplayPort™, allowing you to mix and match technologies
and use existing monitors. The IGMP-enabled switch will let you manage all connections for centralized
control over which sources show on which displays.
The B160-201-HSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz in a point-to-multipoint
switch installation. It extends IR control signals that control a source, such as a Blu-ray™ player, from a
remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. The transmitter and
receiver units mount to a wall, rack or pole using the including hardware.
*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to
number of ports remaining on unmanaged switch.
1 / 4
Page 2
**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other
networking equipment will result in degraded or non-functional performance.
Features
Extends and Distributes HDMI A/V, Serial and IR Control Signals over Cat5/6 Cabling
●
Converts audio/video to an IP-based signal that is transmitted point-to-point to a display 328 ft. away
●
Add low-cost network switches between transmitter and receiver to continue extending distance up to
328 ft. per switch
●
Dual HDMI outputs on receiver for connecting 2 displays
●
HDMI output on transmitter for connecting a local display
Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers
●
Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
●
IGMP-enabled switches allow centralized control over which sources show on which displays
●
Video source can be sent to any analog or digital display, so you can mix and match technologies and
use existing monitors
Enhanced Technical Features
●
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
●
Uses H.264 video compression standard
●
Transmits on 20–60 kHz IR frequency
●
Extends IR control signals that control a source from a remote display
●
Supports RS-232 serial baud rates up to 57600 Bps
●
HDCP and 3D compatible
Plug-and-Play Functionality
●
No software or drivers required
●
Hardware included for mounting on wall, rack or pole
TAA-Compliant
●
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
OVERVIEW
UPC Code 037332196811
INPUT
Voltage Compatibility (VAC) 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
2 / 4
Page 3
External Power Supply Input Specs
(V / Hz / A)
100-240V / 50/60Hz / 1.0A
External Power Supply Output
Specs (V / A)
External Power Supply Cord Length
(ft.)
External Power Supply Cord Length
(m.)
External Power Supply DC Barrel
Connector Specs
5V / 2A
4.5
1.4
OD: 5.5 x 2.1 x 7.5mm, Positive Pin, Negative Sleeve
External Power Supply Plug(s) AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America
External Power Supply Certifications BSMI; CB; CE; FCC; GS; PSE; RCM; UL; cUL
USER INTERFACE, ALERTS & CONTROLS
LED Indicators RJ45 Output (Green / Power, Orange / Signal), Channel Signal (Red), Power (Green)
PHYSICAL
Color Black
Material of Construction Steel
Rackmountable Yes
Receiver Unit Dimensions (hwd / in.) 1.2 x 5 x 3.9
Receiver Unit Weight (lbs.) 0.2
Shipping Dimensions (hwd / in.) 3.10 x 5.90 x 11.50
Shipping Weight (lbs.) 3.30
Transmitter Unit Dimensions (hwd /
in.)
1.2 x 5 x 3.9
Transmitter Unit Weight (lbs.) 0.2
ENVIRONMENTAL
Operating Temperature Range 14 to 167 F (-10 to 75 C)
Storage Temperature Range -4 to 176 F (-20 to 80 C)
Relative Humidity 0% to 85%, Non-Condensing
BTUs 43 BTU/Hr
Power Consumption (Watts) 12.6
COMMUNICATIONS
Signal Range (ft.) 328
Signal Range (m) 100
Latency 2-3 seconds
3 / 4
Page 4
CONNECTIONS
Ports 2
Side A - Connector 1 (2) HDMI (FEMALE)
Side A - Connector 2 3.5MM (FEMALE); DB9 (FEMALE); RJ45 (FEMALE)
Side B - Connector 1 (2) HDMI (FEMALE)
Side B - Connector 2 (2) 3.5MM (FEMALE); RJ45 (FEMALE)
FEATURES & SPECIFICATIONS
Max Supported Video Resolution 1920 x 1080 (1080p) @60Hz
HDMI Specification 1.4
HDCP Specification 1.4
Audio Specification 2 Channel Surround Sound
Driver Required No
Recommended Category Cable N202-Series Cat6 Patch Cable
Max Supported Color Depth 24-bit True Color
IR Remote Extension Support Yes
RS-232 Serial Extension Support Yes
3D Video Supported Yes
Technology HDMI; IR; Serial (RS232); A/V over IP
STANDARDS & COMPLIANCE
Certifications Tested to CE, FCC, RoHS, REACH
WARRANTY
Product Warranty Period
(Worldwide)
1-year limited warranty
© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https:// products/product-certification-agencies
4 / 4
Loading...