VGA Audio + Video over IP Extender Receiver
over Cat5/Cat6, RS-232 Serial and IR Control,
1920 x 1440, 328 ft. (100 m), TAA
MODEL NUMBER: B160-100-VSI
Receives IP-based audio + video signal transmitted point-to-point from a source 328 ft. away via Cat5e/6
cable or through a dedicated Ethernet network switch
Description
The B160-100-VSI VGA Audio + Video over IP Extender Receiver works with a Tripp Lite B160-Series
transmitter (sold separately) to extend and distribute VGA audio + video, RS-232 serial and IR (infrared)
remote signals from the source to the display located up to 328 feet (100 meters) away, which is more
than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged
network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and
display up to 328 feet per switch.
Highlights
●
Compatible with Tripp Lite
B160-Series A/V over IP
transmitters
●
Display video from any source,
analog or digital
●
Supports video resolutions up to
1920 x 1440, including 1080p
●
Scales up to multi-in, multi-out
installation with network switch
●
Plug and play—no software or
drivers required
Package Includes
●
Receiver unit
●
External power supply (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V 2A)
●
Plug adapters for U.S., U.K.,
Europe and Australia
●
IR-In cable
●
3.5 mm to DB9 adapter cable
(M/M)
●
Mounting hardware
●
Owner’s manual
Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting
dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such
as Tripp Lite’s NSS-G16D2. With a compatible B160-Series transmitter, this receiver works with any
analog or digital source, including HDMI and DisplayPort™, allowing you to mix and match technologies
and use existing source devices. An IGMP-enabled switch will let you manage all connections for
centralized control over which sources show on which displays.
The B160-100-VSI supports video resolutions up to 1920 x 1440, including 1080p. It extends IR control
signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals
at serial baud rates up to 57600 Bps. It mounts to a wall, rack or pole using the included hardware.
*Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to
1 / 4
number of ports remaining on unmanaged switch.
**B160-Series designed for use with dedicated network switch. Connecting to a switch used with other
networking equipment will result in degraded or non-functional performance.
Features
VGA Audio + Video, Serial and IR Control Signals over Cat5/6 Cabling
●
Receives IP-based audio + video transmitted point-to-point from a source 328 ft. away
●
Add low-cost network switches between transmitter and receiver to continue extending distance up to
328 ft. per switch
Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers
●
Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
●
IGMP-enabled switches allow centralized control over which sources show on which displays
●
Displays video from any analog or digital source, so you can mix and match technologies and use
existing sources and monitors
Enhanced Technical Features
●
Supports video resolutions up to 1920 x 1440, including 1080p
●
Uses H.264 video compression standard
●
Transmits on 20–60 kHz IR frequency
●
Extends IR control signals that control a source from a remote display
●
Supports RS-232 serial baud rates up to 57600 Bps
●
HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter
Plug-and-Play Functionality
●
No software or drivers required
●
Hardware included for mounting on wall, rack or pole
●
Compatible with all Tripp Lite B160-Series A/V over IP transmitters
TAA-Compliant
●
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
OVERVIEW
UPC Code 037332196750
INPUT
Voltage Compatibility (VAC) 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
External Power Supply Input Specs
(V / Hz / A)
100-240V / 50/60Hz / 1.0A
2 / 4
External Power Supply Output
Specs (V / A)
5V / 2A
External Power Supply Cord Length
(ft.)
External Power Supply Cord Length
(m.)
External Power Supply DC Barrel
Connector Specs
4.5
1.4
OD: 5.5 x 2.1 x 7.5mm, Positive Pin, Negative Sleeve
External Power Supply Plug(s) AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America
External Power Supply Certifications BSMI; CB; CE; FCC; GS; PSE; RCM; UL; cUL
USER INTERFACE, ALERTS & CONTROLS
LED Indicators RJ45 Output (Green / Power, Orange / Signal), Channel Signal (Red), Power (Green)
PHYSICAL
Color Black
Material of Construction Steel
Rackmountable Yes
Shipping Dimensions (hwd / in.) 2.10 x 6.40 x 10.20
Shipping Weight (lbs.) 1.80
Unit Dimensions (hwd / in.) 1.2 x 5 x 3.9
Unit Weight (kg) 0.09
Unit Weight (lbs.) 0.2
ENVIRONMENTAL
Operating Temperature Range 14 to 167 F (-10 to 75 C)
Storage Temperature Range -4 to 176 F (-20 to 80 C)
Relative Humidity 0% to 85%, Non-Condensing
BTUs 18.1 BTU/Hr
Power Consumption (Watts) 5.3
COMMUNICATIONS
Signal Range (ft.) 328
Signal Range (m) 100
Latency 2-3 seconds
CONNECTIONS
Ports 5
Side A - Connector 1 3.5MM (FEMALE); HD15 (FEMALE)
3 / 4
Side B - Connector 1 (2) 3.5MM (FEMALE); RJ45 (FEMALE)
FEATURES & SPECIFICATIONS
Max Supported Video Resolution 1920 x 1440 (1080p) @60Hz
Audio Specification 2 Channel Surround Sound
Driver Required No
Recommended Category Cable N202-Series Cat6 Patch Cable
Max Supported Color Depth 24-bit True Color
IR Remote Extension Support Yes
RS-232 Serial Extension Support Yes
3D Video Supported Yes
Technology IR; Serial (RS232); VGA/SVGA; A/V over IP
STANDARDS & COMPLIANCE
Certifications Tested to CE, FCC, RoHS, REACH
WARRANTY
Product Warranty Period
(Worldwide)
1-year limited warranty
© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https:// products/product-certification-agencies
4 / 4
Loading...