Tripp Lite B155-004-DP-V2 User Manual

●

Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity)
required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running
current graphics drivers with feature set limited to that of your equipment. Compatibility with older
graphics cards not guaranteed.

●

MST compliant DisplayPort 1.2 graphics cards are limited to a bandwidth of 21.6 Gbps amongst all
monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up
approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be
different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display
settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the
connected monitors exceeds 100%, an image will not display on one or more of them.

●

Maximum supported video resolutions and number of monitors depend on your graphics card. Check
graphics card specifications to determine its capabilities.

4-Port Mini DisplayPort to DisplayPort Multi­Monitor Splitter, MST Hub, 4K 60 Hz UHD, DP1.2,
TAA

MODEL NUMBER: B155-004-DP-V2

Displays the same image on 4 DisplayPort monitors, extends the desktop across them, or combines all
into one large monitor. Ideal for digital signage in schools, churches, conference rooms, trade shows and
retail outlets.

Description

The B155-004-DP-V2 4-Port Mini DisplayPort 1.2 to DisplayPort MST Hub connects four DisplayPort
monitors to the Mini DisplayPort output on your computer. Ideal for digital signage in schools, churches,
conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image
on all four monitors, extend the desktop across them, or combine all four into one large monitor in video
wall mode.

The B155-004-DP-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and

1.1a with the feature set being limited to that of your equipment. It supports high-definition video
resolutions up to 1920 x 1080 (1080p) per monitor. In video wall mode, this hub supports expanded video
resolutions, such as 4K @ 60Hz (3840 x 2160) in a 2 x 2 monitor configuration or 7680 x 1080 in a vertical
4 x 1 configuration.

Highlights

●

Supports HD video resolutions
up to 4K @ 60Hz (3840 x 2160)

●

Built-in 6 in. cable connects
directly to Mini DisplayPort
source

●

Supports up to 48-bit Deep
Color (16 bits per channel)

●

Works with all operating
systems

●

Supports DTS-HD, Dolby
TrueHD and 7.1-channel
surround sound

System Requirements

●

Computer with DisplayPort 1.2­compatible graphics card (e.g.
AMD Radeon with AMD
Eyefinity) required for video wall
mode.

●

Backward compatible with most
DisplayPort 1.1a equipment
running current graphics drivers
with feature set limited to that of
your equipment. Compatibility
with older graphics cards not
guaranteed.

●

Mac OS X does not support
MST for NVIDIA and Intel
Graphics Processor Units,
limiting video display on
connected monitors to mirror
mode.

●

Maximum supported video
resolutions and number of
monitors depend on your
graphics card. Check graphics
card specifications to determine
its capabilities.

1 / 4

This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as
DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug­and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly
to a Mini DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B155-004-DP­V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Features

Connects Up to 4 DisplayPort Monitors to Your Computer’s Mini DisplayPort

●

Ideal for digital signs in schools, churches, conference rooms, trade shows and retail settings

●

Displays same image on 4 monitors simultaneously in mirror mode

●

Extends desktop across 4 monitors in extended mode

●

Combines 4 monitors into one large monitor in video wall mode

●

Built-in 6 in. cable connects directly to Mini DisplayPort source

●

LEDs indicate when monitors are receiving a signal

Meets the Latest Performance Standards

●

Supports HD video resolutions up to 1920 x 1080 per monitor

●

Supports expanded resolutions in video wall mode, such as 4K @ 60Hz (3840 x 2160) in a 2 x 2
monitor configuration or 7680 x 1080 in a vertical 4 x 1 configuration

●

Supports HDCP, EDID and DDC

●

Supports 48-bit Deep Color (16 bits per channel)

●

Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio

●

Backward compatible with DisplayPort 1.1 and 1.1a

Easy to Use Almost Anywhere

●

Works with all operating systems

●

Plug and play—no software or drivers required

TAA Compliant

●

Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases

●

Monitor(s) with DisplayPort
input.

Package Includes

●

B155-004-DP-V2 4-Port Mini
DisplayPort 1.2 to DisplayPort
MST Hub

●

External power supply with
NEMA 1-15P plug and 5 ft. cord
(Input: 100–240V, 50/60 Hz,

0.5A; Output: 5V, 2A)

●

Owner’s manual

Specifications

OVERVIEW

UPC Code 037332193407
AC Adapter Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5 ft.
Technology DisplayPort
Host Connector MINI DISPLAYPORT (MALE)

VIDEO

Max Supported Video Resolution 4K @ 60Hz (3840 x 2160)
Max Supported Color Depth 48-bit Deep Color
3D Video Supported Yes

2 / 4