Tripp Lite B130-101A-WP-2 Datasheet

VGA with Audio over Cat5/Cat6 Extender Kit,
Wallplate Transmitter & Receiver with EDID, 1920 x
1440 @ 60 Hz, Up to 1000 ft.

MODEL NUMBER: B130-101A-WP-2

Description

The B130-101A-WP-2 VGA with Audio over Cat5/Cat6 Extender Kit includes transmitter and receiver wallplate

units that work in tandem to extend a VGA signal to to a projector, monitor or television. The kit is ideal for digital

signs in schools, churches or retail applications where the video source is located farther than conventional

cables allow. Attractive wallplate units eliminate cable clutter.

Because compatibility issues can occur when EDID information is not properly communicated between the

source and the display, the B130-101A-WP-2 includes an EDID copy feature. This enables the transmitter to

store the display’s EDID information and send it to the video source, ensuring top-shelf compatibility.

The B130-101A-WP-2 can extend a 1024 x 768(60 Hz) signal up to 1,000 feet and a 1920 x 1440(60 Hz) signal

up to 500 feet when using 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N022-01K-GY(Cat5) and

N222-01K-GY(Cat6), to connect the two units. For optimal image quality between 500 and 1,000 feet, use zero-skew cable, such as Tripp Lite’s P524-01K.

The RJ45-type wallplate jacks accept standard Cat5e/6 patch cables, so no 110 punchdown connection is required.

You can also connect up to three B132-110 or B132-110A remote repeaters in a chain(using Cat5e/6 cable) for a total of five VGA displays(one local and four

remote) and full 1024 x 768(60 Hz) signal extension of 2,000 feet.

Features

Extended Display Identification Data(EDID) Copy Feature

Transmitter stores monitor’s EDID information and sends it to video source, ensuring optimal display compatibility

Monitor must be connected directly to transmitter’s VGA port to activate EDID copy feature

Extends High-Definition VGA Video and Audio Signals

Extends a 1024 x 768(60 Hz) signal up to 1,000 ft. and a 1920 x 1440(60 Hz) signal up to 500 ft.

Highlights

Stores display’s EDID information

and sends it to source

Extends 1024 x 768 video and

audio signal up to 1,000 ft.

Extends 1920 x 1440 video and

audio signal up to 500 ft.

Built-in equalization and gain

controls let you fine-tune image

Plug and play—no software or

drivers to install

System Requirements

For international use, the

B110-INT power supply can be

purchased separately; it features

plugs for the UK, Europe, and

Australia

Package Includes

Transmitter wallplate unit

Receiver wallplate unit

VGA + audio “Y” splitter cable

Screwdriver for adjusting

equalization and gain

(2) External Power Supplies with

NEMA 1-15P Plug (Input:

100-240V, 50/60 Hz, 0.5A;

Output: 5V, 2A)

Wallplate screws

Owner’s Manual

1 / 3

Connect up to three B132-110 or B132-110A remote repeaters to the chain for maximum 1024 x 768(60 Hz) signal range of 2,000 ft.

Transmitter and receiver connect with one Cat5e/6 cable, such as Tripp Lite’s N022-01K-GY or N222-01K-GY 24 AWG solid-wire Cat5e/6 cable

No 110 punchdown connection required

For optimal image quality between 500 and 1,000 ft., use zero-skew cable, such as Tripp Lite’s P524-01K

Easy to Set Up and Use

Plug-and-play engineering—no software or drivers to download and install

Wallplate units eliminate cable clutter

LEDs indicate at a glance when the unit is receiving power

Included VGA + audio “Y” splitter cable allows connection of local monitor and speakers

Built-in equalization and gain controls lets you adjust the image on the remote monitor

Wall-mounting screws included

Supports all operating systems, as well as HDCP

TAA-Compliant

Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases

Specifications

OVERVIEW

Accessories Type Extender

Cable Type VGA

PHYSICAL

Shipping Weight (lbs.) 1.65

Shipping Weight (kg) 0.75

CONNECTIONS

Connector A HD15 (FEMALE) (X2)

Connector B 3.5MM (FEMALE) (X2)

Connector C RJ45 (FEMALE) (X2)

Ports 2

SPECIAL FEATURES

Chromebook Compatible No

WARRANTY

2 / 3