Page 1
Owner’s Manual
4K HDMI Over Cat6
Wall-Plate Extender Kit
Models: B127A-1A1-FHFH (Single Output),
B127A-2A1-FHFH (Dual Output)
Este manual está disponible en español en la página de
Ce manuel est disponible en français sur le site Web de
Русскоязычная версия настоящего руководства представлена на
веб-сайте компании Tripp Lite по адресу: tripplite.com/support
Dieses Handbuch ist in spanischer Sprache auf der Website
Tripp Lite : tripplite.com/support
Tripp Lite : tripplite.com/support
verfügbar Tripp Lite: tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be automatically entered to
win an ISOBAR® surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Page 2
Package Contents
• Wall Plate Transmitter and Receiver
• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)
• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.; CEE 7/16
Schuko; NEMA 1-15P North America)
• IR-In and IR-Out Cables
• Owner’s Manual
Optional Accessories:
• N202-Series Cat6 24 AWG Solid-Wire Patch Cables
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
Product Features
B127A-1A1-FHFH
• Extends 4K x 2K (3840 x 2160) @ 60 Hz video (as specified in HDMI 2.0)
up to 230 ft. (70 m)
• HDCP 2.2 and HDR compatible
• Local HDMI port included on transmitter unit
• Plug and play—no software or drivers required
• Power over Cable (PoC) function allows external power supply to be
plugged in at either transmitter or receiver side and provide power to
both units
• Supports up to 7.1-channel surround sound audio
• Supports bi-directional IR
2
Page 3
Product Features
B127A-2A1-FHFH
• Extends 4K x 2K (3840 x 2160) @ 60 Hz video (as specified in HDMI 2.0)
up to 230 ft. (70 m)
• HDCP 2.2 and HDR compatible
• Local HDMI port included on transmitter unit
• Plug and play—no software or drivers required
•
Power over Cable (PoC) function allows external power supply to be plugged
in at either transmitter or receiver side and provide power to both units
• Supports up to 7.1-channel surround sound audio
• Supports bi-directional IR
Disclaimer
Before installation, please check the following settings of your source(s) and
TV/monitor(s):
1. Set display to 60 Hz. Double-check factory settings, as default can be set
to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some displays may
have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: To connect a local monitor to your installation, the UHD Deep Color setting may
need to be disabled on your local TV/monitor (depending on make/model) to achieve
4K 60 Hz resolution.
3
Page 4
Installation
B127A-1A1-FHFH Single-Output Extender Kit
Notes:
• Make sure all equipment in the installation—such as monitors, an HDMI
notebook PC and the transmitter—is powered OFF.
• Test to ensure the entire installation works properly before pulling cables
through ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG
solid-wire cabling.
• External power is not required for remote receiver units due to Power-over-
Cable (PoC) technology incorporated in the transmitter units.
Up to 230 ft. Cat6 solid cable at 4K / 60 Hz
Extender Kit
Up to 15 ft. HDMI 2.0 cable at 4K / 60 Hz
4
Page 5
Mounting Instructions
1. Using an HDMI cable, connect the HDMI source to the INPUT port on the
local transmitter unit.
2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT
port on the B127A-1A1-FHFH local transmitter unit.
3. Using Cat6 cable, connect the RJ45 port on the local transmitter unit to
the RJ45 port on the remote receiver unit.
4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
5. Turn the power on to your connected TVs/monitors. The LOCAL (orange)
LED will illuminate to indicate the local port is connected to a display.
6. Connect the external power supply to the local transmitter unit and plug
it into an available wall outlet or (optional) a Tripp Lite Surge Protector,
Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The
POWER (green) LED on the local transmitter unit will illuminate to indicate
the unit is receiving power from the external power supply. The POWER
(green) LED on the remote receiver unit will illuminate to indicate the unit
is receiving power from the local transmitter unit through PoC technology.
7. Turn on the power to the HDMI source. The OUTPUT (orange) LED on the
local transmitter unit will illuminate to indicate a signal is being received
from the source.
8. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from source to
display. The screen should now display on the connected monitor.
Optional: Connect the included IR-OUT cable to the transmitter unit’s IR-OUT port.
Place the sensor on the IR-OUT cable in an unobstructed area within clear view of the
device being controlled. Then connect the included IR-IN cable to
the receiver unit’s IR-IN port. The IR-IN cable will communicate the desired command
via the transmitter’s IR-OUT cable.
Note: The IR-OUT cable will receive the signal from the remote control and send it to
the device being controlled (e.g. Blu-ray™ player, etc.).
5
Page 6
B127A-2A1-FHFH Dual-Output Extender Kit
Extender Kit
Up to 230 ft. Cat6 solid cable at 4K / 60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K / 60 Hz
Notes:
• Make sure all equipment in the installation--such as monitors, an HDMI
• Test to ensure the entire installation works properly before pulling cables
• To achieve maximum distance and performance, use 24 AWG solid wire Cat6
• External power is not required for remote receiver units due to Power-over-
Installation
notebook PC and the transmitter--is powered OFF.
through ceilings/walls.
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solidwire cabling.
Cable (PoC) technology incorporated in the transmitter units.
Extender Kit
Up to 230 ft. Cat6 solid cable at 4K / 60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K / 60 Hz
66
Page 7
Mounting Instructions
1. Using an HDMI cable, connect the HDMI source to the INPUT port on the
local transmitter unit.
3. Optional: Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect a local monitor to the LOCALOUT
port on the local transmitter unit.
3. Using Cat6 cable, connect the RJ45 port on the local transmitter unit to
the RJ45 port on the remote receiver unit.
4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
5.
Turn the power on to your connected TVs/monitors. The LOCAL (orange) LED
will illuminate to indicate the local port has been connected to a display.
6. Connect the external power supply to the local transmitter unit and plug
it into an available wall outlet or (optional) a Tripp Lite Surge Protector,
Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The
POWER (green) LED on the local transmitter unit will illuminate to indicate
the unit is receiving power from the external power supply. The POWER
(green) LED on the remote receiver unit will illuminate to indicate the unit
is receiving power from the local transmitter unit through PoC technology.
7. Turn on the power to the HDMI source. The OUTPUT (orange) LED on the
local transmitter unit will illuminate to indicate a signal is being received
from the source.
8. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from source to
display. The screen should now display on the connected monitor.
Optional: Connect the included IR-OUT cable to the transmitter unit’s IR-OUT port.
Place the sensor on the IR-OUT cable in an unobstructed area within clear view of the
device being controlled. Then connect the included IR-IN cable to the receiver unit’s
IR-IN port. The IR-IN cable will communicate the desired command via the transmitter’s
IR-OUT cable.
Note: The IR-OUT cable will receive the signal from the remote control and send it to
the device being controlled (e.g. Blu-ray™ player, etc.).
7
Page 8
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year
from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material
Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied
by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not
apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or
modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion
of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties,
or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing
for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when
customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and
illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
888
8
20-10-177 93-3D24_RevA
Loading...