Tripp Lite B127A-1A0-FH, B127A-2A0-FH, B127A-1A1-FDFH, B127A-1A1-BDFH, B127A-1A1-FHFH Owner's Manual

Owner's Manual

4K A/V over Cat6 Wall-Plate

Extender Kits and Receivers

B127A-1A1-FHFH, B127A-2A1-FHFH, B127A-1A1-BHFH

HDMI Receiver Models: B127A-1A0-FH, B127A-2A0-FH

HDMI Extender Kit Models:

DisplayPort to HDMI Extender Kit Models:

B127A-1A1-FDFH, B127A-1A1-BDFH

Este manual está disponible en español en la página de Tripp Lite:

Ce manuel est disponible en français sur le site Web de Tripp Lite :

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website

tripplite.com

tripplite.com

verfügbar: tripplite.com

WARRANTY REGISTRATION

Register your product today and be automatically entered to

win an ISOBAR® surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Copyright © 2021 Tripp Lite. All rights reserved.

1

Package Contents

B127A-1A1-FHFH

• Wall-Plate Transmitter and Receiver

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)

• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.;
CEE 7/16 Schuko; NEMA 1-15P North America)

• IR-In and IR-Out Cables

• Mounting Screws

• Owner’s Manual

B127A-2A1-FHFH

• Wall-Plate Transmitter and Dual Output Receiver

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)

• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.;
CEE 7/16 Schuko; NEMA 1-15P North America)

• IR-In and IR-Out Cables

• Mounting Screws

• Owner’s Manual

2

Package Contents

B127A-1A1-FDFH

• Wall-Plate DisplayPort Transmitter and HDMI Receiver

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)

• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.;
CEE 7/16 Schuko; NEMA 1-15P North America)

• IR-In and IR-Out Cables

• Mounting Screws

• Owner’s Manual

B127A-1A1-BHFH

• Box-Style Transmitter and Wall-Plate Receiver

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)

• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.;
CEE 7/16 Schuko; NEMA 1-15P North America)

• IR-In and IR-Out Cables

• Mounting Hardware

• Owner’s Manual

3

Package Contents

B127A-1A1-BDFH

• Box-Style DisplayPort Transmitter and Wall-Plate HDMI Receiver

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.6A;
Output: 24V/1A)

• Plug Adapters (AS/NZS 3112 Australia; BS 1363 U.K.;
CEE 7/16 Schuko; NEMA 1-15P North America)

• Mounting Hardware

• Owner’s Manual

B127A-1A0-FH

• Wall-Plate Receiver

• Mounting Screws

• Owner’s Manual

B127A-2A0-FH

• Wall-Plate Dual-Output Receiver

• Mounting Screws

• Owner’s Manual

4

Optional Accessories

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0
Cables

• P580-Series DisplayPort 1.2 Cables

• B127A-010-H Signal Booster

5

Product Features

B127A-1A1-FHFH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Local HDMI port included on transmitter unit supports
4K/60 Hz

• Plug and play—no software or drivers required

• Power over Cable (PoC) function allows external power supply
to be plugged in at either transmitter or receiver side and
provides power to both units

• Single-gang metal wall-plate design with included mounting
screws

• Support up to 7.1-channel surround sound audio

• Supports bi-directional IR with the included IR-In and IR-Out
cables

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-2A1-FHFH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

6

Product Features

• Single-gang metal wall-plate design with included mounting
screws

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Local HDMI port included on transmitter unit supports
4K/60 Hz

• Plug and play—no software or drivers required

• Power over Cable (PoC) function allows the external power
supply to be plugged in at either transmitter or receiver side
and provides power to both units

• Support up to 7.1-channel surround sound audio

• Supports bi-directional IR with the included IR-In and IR-Out
cables

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-1A1-FDFH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• Single-gang metal wall-plate design with included mounting
screws

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

7

Product Features

• Local HDMI port included on transmitter unit supports
4K/60 Hz

• Plug and play—no software or drivers required

• Bi-directional Power over Cable (PoC) function allows external
power supply to be plugged in at either transmitter or receiver
side

• Remote receiver unit includes built-in equalization (EQ) control

• Real-time compression and decompression technology

• Supports pass-through audio formats including:
LPCM 2.0/5.1/7.1

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-1A1-BHFH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• Box-style transmitter can be mounted to a wall, 19” rack, pole
or other hard surface with included mounting hardware

• Single-gang metal wall-plate receiver with included mounting
screws

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Local HDMI port included on transmitter unit supports
4K/60 Hz

8

Product Features

• Plug and play—no software or drivers required

• Power over Cable (PoC) function allows external power supply
to be plugged in at the transmitter side and provides power to
receiver unit

• Remote receiver unit includes built-in equalization (EQ) control

• Real-time compression and decompression technology

• Supports bi-directional IR with the included IR-In and IR-Out
cables

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-1A1-BDFH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• Box-style transmitter can be mounted to a wall, 19” rack, pole
or other hard surface with included mounting hardware

• Single-gang metal wall-plate receiver with included mounting
screws

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Local HDMI port included on transmitter unit supports
4K/60 Hz

• Plug and play—no software or drivers required

9

Product Features

• Power over Cable (PoC) function allows external power supply
to be plugged in at the transmitter side and provides power to
receiver unit

• Includes real-time video compression and decompression
technology

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-1A0-FH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• Single-gang metal wall-plate receiver works with Tripp Lite
B127A-Series transmitter, splitter and switch products (sold
separately)

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Plug and play—no software or drivers required

• Power over Cable (PoC) function provides power to the receiver
from a connected B127A-Series transmitter, splitter or switch
unit via Cat6 cable

• Includes real-time video compression and decompression
technology

10

Product Features

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

B127A-2A0-FH

• Extends video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz (as specified in HDMI 2.0) to an HDMI monitor up to
230 ft. (70 m)

• Dual-output single-gang metal wall-plate receiver works
with Tripp Lite B127A-Series transmitter, splitter and switch
products (sold separately)

• HDCP 2.2, High Dynamic Range (HDR) and 4:4:4 color space
compatible

• Plug and play—no software or drivers required

• Power over Cable (PoC) function provides power to the receiver
from a connected B127A-Series transmitter, splitter or switch
unit via Cat6 cable

• Real-time video compression and decompression technology

• Compatible with B127A-010-H signal booster to extend the
maximum transmission distance to 400 ft. (120m) from the
source (sold separately, see tripplite.com)

11

Disclaimer

Before installation, please check the following settings of your
source(s) and TV/monitor(s):

1. Set display to 60 Hz. Double-check factory settings, as

default can be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0.

Some displays may have default setting at HDMI 1.4.

3. Verify your monitor has the HDR feature enabled. Some

displays may have this feature disabled as a factory setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on

your TV/monitor. Confirm with your TV/monitor manufacturer
which HDMI ports support UHD Deep Color.

Note: To connect a local monitor to your installation, the UHD Deep Color
setting may need to be disabled on your local TV/monitor (depending on
make/model) to achieve 4K 60 Hz resolution.

12

Installation

B127A-1A1-FHFH Single-Output
Extender Kit

Notes:

• Make sure all equipment in the installation—such as monitors, an
HDMI notebook PC and the transmitter—is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

1

B127-1A1-FHFH

Extender Kit

IR Control

Monitor

IR

Pad

Sensor

HDR Player

Local / Transmitter Remote / Receiver

Up to 230 ft. Cat6 solid cable at 4K / 60 Hz.

2

Up to 15 ft. HDMI 2.0 cable at 4K / 60 Hz.

IR Control

Up to 230 ft. (70 m) at 4K / 60 Hz.

IR

Pad

Sensor

TV

13

Installation

1. Using an HDMI cable, connect the HDMI source to the INPUT

port on the local transmitter unit.

2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the B127A-1A1-FHFH
local transmitter unit.

3. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).

4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to a monitor.

5. Turn the power on to your connected TVs/monitors.

6. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The POWER (green) LED
on the local transmitter unit will illuminate to indicate the unit
is receiving power from the external power supply. The DATA
(green) LED on the remote receiver unit will illuminate to
indicate the unit is receiving power from the local transmitter
unit through PoC technology.

7. Turn on the power to the HDMI source. The DATA (green) LED

on the local receiver unit will blink to indicate a signal is being
received from the source.

14

Installation

Optional: Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).

15

Installation

B127A-2A1-FHFH Dual-Output Extender Kit

Notes:

• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

1

B127A-2A1-FHFH

Extender Kit

IR Control

Monitor

IR

Pad

Sensor

HDR Player

Local / Transmitter Remote / Receiver

Up to 230 ft. Cat6 solid cable at 4K / 60 Hz.

2

Up to 15 ft. HDMI 2.0 cable at 4K / 60 Hz.

IR Control

Up to 230 ft. (70 m)

at 4K / 60 Hz.

IR

Pad

Sensor

TVTV

16

Installation

1. Using an HDMI cable, connect the HDMI source to the INPUT

port on the local transmitter unit.

2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the local transmitter
unit.

3. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).

4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to the monitors.

5. Turn the power on to your connected TVs/monitors.

6. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The DATA (green) LED on
the local transmitter unit will illuminate to indicate the unit
is receiving power from the external power supply. The DATA
(green) LED on the remote receiver unit will illuminate to
indicate the unit is receiving power from the local transmitter
unit through PoC technology.

7. Turn on the power to the HDMI source. The DATA (green) LED

on the local receiver unit will blink to indicate a signal is being
received from the source.

17

Installation

Optional: Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).

18

Installation

B127A-1A1-FDFH Wall-Plate Extender Kit

Notes:

• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-FDFH Extender Kit

1

Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.

2

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.
Up to 15 ft. (4.5 m) DisplayPort cable at 4K / 60 Hz.

3

Monitor

Local / Transmitter Remote / Receiver

DisplayPort
Source

19

TV

Installation

1. Using a DisplayPort 1.2 cable (such as Tripp Lite P580-Series

4K/60 Hz DisplayPort cables), connect the DisplayPort source
to the INPUT port on the local transmitter unit.

2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the B127A-1A1-FDFH
local transmitter unit.

3. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).

4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to the monitors.

5. Turn the power on to your connected TVs/monitors.

6. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The DATA (green) LED on
the local transmitter unit will illuminate to indicate the unit
is receiving power from the external power supply. The DATA
(green) LED on the remote receiver unit will illuminate to
indicate the unit is receiving power from the local transmitter
unit through PoC technology.

20

Installation

7. Turn on the power to the DisplayPort source. The DATA (green)

LED on the local receiver unit will blink to indicate a signal is
being received from the source.

21

Installation

B127A-1A1-BHFH Box Transmitter and
Wall-Plate Receiver Extender Kit

Notes:

• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

22

Installation

B127A-1A1-BHFH Extender Kit

1

Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.

2

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.

IR Control

IR

Pad

Sensor

IR Control

Pad

IR

Sensor

Monitor

HDR Player

Local / Transmitter Remote / Receiver

TV

1. Using an HDMI 2.0 cable, connect the HDMI source to the

INPUT port on the local transmitter unit.

2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the B127A-1A1-BHFH
local transmitter unit.

3. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).

23

Installation

4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to a monitor.

5. Turn the power on to your connected TVs/monitors.

6. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The POWER (green)
LED and RJ45 (green) LED on the local transmitter unit will
illuminate to indicate the unit is receiving power from the
external power supply. The DATA (green) LED on the remote
receiver unit will illuminate to indicate the unit is receiving
power from the local transmitter unit through PoC technology.

7. Turn on the power to the HDMI source.

8. The RJ45 (orange) LED will illuminate on the local transmitter

unit and the DATA (green) LED on the remote receiver unit
will blink to indicate a signal is being received from source
to display. The screen should now display on the connected
monitor.

Optional: Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).

24

Installation

B127A-1A1-BDFH Box Transmitter and
Wall-Plate Receiver Extender

Notes:

• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-BDFH Extender Kit

1

Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.

2

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.
Up to 15 ft. (4.5 m) DisplayPort cable at 4K / 60 Hz.

3

Monitor TV

Local / Transmitter Remote / Receiver

DisplayPort
Source

25

Installation

1. Using a DisplayPort 1.2 cable (such as Tripp Lite P580-Series

cables), connect the DisplayPort source to the INPUT port on
the local transmitter unit.

2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the B127A-1A1-BDFH
local transmitter unit.

3. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).

4. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to a monitor.

5. Turn the power on to your connected TVs/monitors.

6. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a
Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The POWER (green)
LED and RJ45 (green) LED on the local transmitter unit will
illuminate to indicate the unit is receiving power from the
external power supply. The DATA (green) LED on the remote
receiver unit will illuminate to indicate the unit is receiving
power from the local transmitter unit through PoC technology.

26

Installation

7. Turn on the power to the DisplayPort source.

8. The RJ45 (orange) LED will illuminate on the local transmitter

unit and the DATA (green) LED on the remote receiver unit
will blink to indicate a signal is being received from source
to display. The screen should now display on the connected
monitor.

Optional: Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).

27

Installation

B127A-1A0-FH and B127A-2A0-FH
Wall-Plate Receivers

Notes:

• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.

• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

• External power is not required for remote receiver units due to Power­over-Cable (PoC) technology incorporated in the transmitter units.

• The diagram below shows a B127A-004-BH splitter unit with
B127A-1A0-FH and B127A-2A0-FH receiver units to illustrate
functionality with transmitter, splitter and switch units in the
B127A-Series. See tripplite.com for details.

28

Installation

B127A-004-BH Receiver

1

Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.

2

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.

B127A-1P0-PH

OUTPUT 2

B127A-1A0-BH

B127A-1A0-FH

B127A-2A0-FH

B127A-004-BH



OUTPUT INPUT

REMOTE

DATA

OUTPUT 1



REMOTE

DATA





DC 24V, 1A

OUTPUT 4 OUTPUT 3 OUTPUT 2 OUTPUT 1



Optional

Local Monitor



INPUT

 

HDR Player

OUTPUT 1

LOCAL

See installation steps for previously mentioned extender kits for
using these receivers in an installation.

29

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of one (1) year

from the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any such
defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from TRIPP LITE
or an authorized TRIPP LITE service center. Products must be returned to
TRIPP LITE or an authorized TRIPP LITE service center with transportation
charges prepaid and must be accompanied by a brief description of the
problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment which has been damaged by
accident, negligence or misapplication or has been altered or modified in
any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit
limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP
LITE is not liable for any costs, such as lost profits or revenue, loss of
equipment, loss of use of equipment, loss of software, loss of data,
costs of substitutes, claims by third parties, or otherwise.

30

Warranty and Product Registration

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions
apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE)
Directive and implementing regulations, when customers buy
new electrical and electronic equipment from Tripp Lite they are
entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like
basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately
becomes waste

Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is
not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are
subject to change without notice. Photos and illustrations may differ
slightly from actual products.

31

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

32

21-02-252 93-3D24_RevB