Tripp Lite B127A-010-H, B127A-1A1-BHBH, B127A-1A1-BHPH, B127A-111-BHTH, B127A-110-BH Owner's Manual

Owner's Manual

HDMI over Cat6 Extender Kits

and Repeater, 4K/60 Hz

Extender Kit Models: B127A-1A1-BHBH,

B127A-1A1-BHPH, B127A-111-BHTH, B127A-110-BH

Repeater Model: B127A-010-H

Este manual está disponible en español en la página de Tripp Lite:

Ce manuel est disponible en français sur le site Web de Tripp Lite :

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website

WARRANTY REGISTRATION

Register your product today and be automatically entered to

win an ISOBAR® surge protector in our monthly drawing!

tripplite.com

tripplite.com

verfügbar: tripplite.com

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Copyright © 2021 Tripp Lite. All rights reserved.

1

Package Contents

B127A-1A1-BHBH

B127A-1A1-BHPH

B127A-111-BHTH

B127A-110-BH

B127A-010-H

Local and Remote Units (LR),
Remote Unit (R), Repeater Unit (RT)

External Power Supplies (0 or 1) 1 1 1 1 0

Mounting Hardware Y Y Y Y N

LR LR LR R RT

Product Features

All

• Support video resolutions up to 4K x 2K (3840 x 2160) @
60 Hz, as specified in HDMI 2.0, with 4:4:4 Chroma
Subsampling

• Support up to 7.1-channel surround sound audio

• HDCP 2.2- and HDR-compatible

• USB 1.1 standard

• Plug and play—no software or drivers required

Note: USB 1.1 standard and bi-directional IR applies only to the extender
kits, not the repeater.

2

Product Features

B127A-1A1-BHBH

• HDMI over Cat6 Power over Cable (PoC) Extender Kit

• Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal, as specified
in HDMI 2.0, up to 230 ft. (70 m) from the source

• Built-in local HDMI port supports 4K @ 60 Hz signal

• Remote receiver unit features built-in equalization (EQ) control
and auto EDID image adjustment

• Supports up to 7.1-channel surround sound audio

• Receiver features built-in Toslink port for audio extraction
function

• Compatible with HDCP 2.2, High Dynamic Range (HDR) and
36-bit color depth

• Plug and play—no software or drivers required

• Support bi-directional IR and USB 1.1 function by dip switch
selection

• Includes mounting hardware that enables both the local
transmitter and remote receiver units to be wall-mounted,
rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply
to be plugged in at either transmitter or receiver side and
provide power to both units

3

Product Features

B127A-1A1-BHPH

• HDMI over Cat6 Power over Cable (PoC) Extender Kit with
Pigtail Receiver

• Extends a 4K x 2K (3840 x 2160) @ 60 Hz signal, as specified
in HDMI 2.0, up to 230 ft. (70 m) from the source

• Built-in local HDMI port supports 4K @ 60 Hz signal

• Remote receiver unit features built-in equalization (EQ) control
and auto EDID image adjustment with 1 ft. HDMI male cable

• Supports up to 7.1-channel surround sound audio

• Compatible with HDCP 2.2, High Dynamic Range (HDR) and
36-bit color depth

• Plug and play—no software or drivers required

• Includes mounting hardware that enables the local transmitter
to be wall-mounted, rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply
to be plugged into transmitter and provide power to both units

4

Product Features

B127A-111-BHTH

• HDMI over Cat6 Power over Cable (PoC) daisy-chainable
Extender Kit

• Remote transceiver unit features built-in equalization (EQ)
control, auto EDID image adjustment and RJ45 expanding port
to be able to connect to next B127A-110-BH

• Transceiver features built-in Toslink port for audio extraction
function

• Extends and expands a 4K x 2K (3840 x 2160) @ 60 Hz
signal, as specified in HDMI 2.0, in an over Cat6 installation,
allowing multiple monitors to be located at different points in a
chain by adding up to four B127A-110-BH units

• Extends a 4K (3840 x 2160) @ 60 Hz signal up to an
additional 230 ft. or a 1080p @ 60 Hz signal up to an
additional 230 ft. from each remote/repeater unit to the next
unit in the chain (in a full four-level daisy chain installation), a
4K (3840 x 216) @ 60 Hz signal up to 920 ft. or a 1080p @
60 Hz signal up to 920 ft. from the source to the last remote
unit in the chain

• Increase the maximum transmission distance to 1,090 ft. by
adding a B127A-010-H signal booster to the first link of a
daisy-chain installation.

Note: The signal booster will only work when used in the first link of

the daisy-chain installation.

5

Product Features

• Supports up to 7.1-channel surround sound audio

• Transceiver features built-in Toslink port for audio extraction
function

• Compatible with HDCP 2.2, High Dynamic Range (HDR) and
36-bit color depth

• Plug and play—no software or drivers required

• Includes mounting hardware that allows unit to be wall­mounted, rack-mounted or pole-mounted

• Power over Cable (PoC) function allows external power supply
to be plugged into either transmitter or receiver side and
provide power to connected units

B127A-110-BH

• HDMI over Cat6 Power over Cable (PoC) transceiver unit

• Works with the B127A-111-BHTH to extend a 4K x 2K
(3840 x 2160) @ 60 Hz signal, as specified in HDMI 2.0,
up to 230 ft. (70 m)

• This transceiver unit features built-in equalization (EQ) control
and auto EDID image adjustment and one RJ-45 expanding
port to be able to connect to next B127A-110-BH

• Transceiver features built-in Toslink port for audio extraction
function

• Compatible with HDCP 2.2, High Dynamic Range (HDR) and
36-bit color depth

• Add a B127A-010-H signal booster for increased maximum
transmission distance. See B127A-111-BHTH for details.

6

Product Features

B127A-010-H

• Repeater unit extends the transmission of a 4K x 2K
(3840 x 2160) @ 60 Hz signal, as specified in HDMI 2.0,
up to a total of 400 ft. (120 m)

• Power over Cable (PoC) technology means no external
power is required to power the unit

• HCDP 2.2- and HDR-compliant

• Supports up to 7.1-channel surround sound audio

• Compatible with all B127A-Series products, including HDMI,
DisplayPort and USB-C models

• Increase the maximum transmission distance to 1,090 ft. by
adding a B127A-010-H signal booster to the first link of a
B127A-111-BHTH and B127A-110-BH daisy-chain installation.

Note: The signal booster will only work when used in the first link of

the daisy-chain installation.

Optional Accessories:

• N202-Series Cat6 24 AWG Solid Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed
HDMI 2.0 Cables

7

Disclaimer

Before installation, please check the following settings of your
source(s) and TV/monitor(s):

1. Set display to 60 Hz. Double-check factory settings, as

default can be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0.

Some displays may have default setting at HDMI 1.4.

3. Verify your monitor has the HDR feature enabled. Some

displays may have this feature disabled as a factory setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on

your TV/monitor. Confirm with your TV/monitor manufacturer
which HDMI ports support UHD Deep Color.

5. Check USB/IR DIP switch, as the default setting is set to IR.

Note: To connect a local monitor to your installation, the UHD Deep

Color setting may need to be disabled on your local TV/monitor
(depending make/mode) to achieve 4K @ 60 Hz resolution.

8

Mounting Instructions (select models only)

The B127A-1A1-BHBH, B127A-1A1-BHPH, B127A-111-BHTH
and B127A-110-BH include mounting hardware that allows for a
variety of mounting methods.

The following images illustrate how the included mounting
brackets can be attached for different installations.

Notes:

• The model shown in the below images is for illustrative purposes only.

Your product may vary by model number, size or port orientation. The
mounting options for all over IP units are the same.

• Only the transmitter unit in the B127A-1A1-BHPH can be mounted.

The receiver is a pigtail-type unit that cannot be mounted.

Wall-Mount

19” Rack-Mount Pole-Mount

9

Standard Extender Kit Installation

Notes:

• Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable or cable with a
gauge (AWG) size higher than 24 AWG will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

• The installation diagram shows a B127A-1A1-BHBH unit.

• External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-BHBH
extender kit

IR Control

Pad

IR Sensor

Monitor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
Micro-USB cable
Toslink cable

IR Control

Pad

10

IR
Sensor

USB Keyboard

USB Mouse

TV

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs,

Blu-ray™ players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.

3. Optional for B127A-1A1-BHBH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series
cables), connect a local monitor to the LOCALOUT port on
the B127A-1A1-BHBH local transmitter unit.

4. Optional: For extended range, connect a B127A-010-H

signal repeater unit to the transmitter and receiver via
Cat6 cabling. See B127A-010-H product features for more
information.

5. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
unit’s HDMI port to a monitor.

7. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port
has been connected to a display.

11

Standard Extender Kit Installation

8. Connect the external power supply to either the transmitter

or receiver unit. Plug it into an available wall outlet or a
Tripp Lite surge protector, power distribution unit (PDU) or
uninterruptible power supply (UPS). The POWER (green)
LED on the local transmitter unit will illuminate to indicate
the unit is receiving power from the external power supply.
The POWER (green) LED on the remote receiver unit will
illuminate to indicate the unit is receiving power from the
local transmitter unit through PoC technology.

9. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.

10. The (orange) RJ45 LED will illuminate on both the local

transmitter and remote receiver units to indicate a signal is
being received from the source to display. The screen should
now display on the connected monitor(s).

12

Standard Extender Kit Installation

Notes:

• Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable or cable with a
gauge (AWG) size higher than 24 AWG will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

• The installation diagram shows a B127A-1A1-BHPH unit.

• External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127A-1A1-BHPH
extender kit

IR Control

Pad

IR Sensor

Monitor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
Micro-USB cable

13

TV

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.

3. Optional for B127A-1A1-BHPH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series
cables), connect a local monitor to the LOCALOUT port on
the B127A-1A1-BHPH local transmitter unit.

4. Optional: For extended range, connect a B127A-010-H

signal repeater unit to the transmitter and receiver via
Cat6 cabling. See B127A-010-H product features for
more information.

5. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

6.

Connect the remote receiver unit’s HDMI cable to a monitor/TV.

7. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port
has been connected to a display.

14

Standard Extender Kit Installation

8. Connect the external power supply to the transmitter

unit. Plug it into an available wall outlet or a Tripp Lite
surge protector, power distribution unit or uninterruptible
power supply (UPS). The POWER (green) LED on the local
transmitter unit will illuminate to indicate the unit is receiving
power from the external power supply. The POWER (green)
LED on the remote receiver unit will illuminate to indicate the
unit is receiving power from the local transmitter unit through
PoC technology.

9. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.

10. The (orange) RJ45 LED will illuminate on both local

transmitter and remote receiver units to indicate a signal
is being received from source to display. The screen should
now display on the connected monitor(s).

15

Standard Extender Kit Installation

Notes:

• Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid

wire Cat6 cable. Using stranded wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid wire cabling.

• The installation diagram shows a B127A-111-BHTH transmitter and

transceiver with an additional transceiver attached to demonstrate the
kit’s daisy-chain capabilities.

• External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

16

Standard Extender Kit Installation

B127A-111-BHTH
extender kit

IR Control
Pad

IR Sensor

Monitor

HDR Player

LOCAL / TRANSMITTER REMOTE / RECEIVER

Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
Toslink cable

IR Control
Pad

IR Sensor IR Sensor

TV TV

IR Control
Pad

1. Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.

3. Optional for B127A-111-BHTH: Using an HDMI 2.0 cable

(such as Tripp Lite P569-XXX-CERT or P568-XXX-2A Series
cables), connect a local monitor to the LOCALOUT port on
the B127A-111-BHTH local transmitter unit.

17

Standard Extender Kit Installation

4. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A Series cables), connect the remote receiver
or transceiver unit’s HDMI port to a monitor.

6. Turn on the power to your connected TVs/monitors. The

LOCAL (orange) LED will illuminate to indicate the local port
has been connected to a display.

7. Connect the external power supply to the transmitter. Plug

it into an available wall outlet or a Tripp Lite surge protector,
power distribution or uninterruptible power supply (UPS).
The POWER (green) LED on the local transmitter unit will
illuminate to indicate the unit is receiving power from the
external power supply. The POWER (green) LED on the
remote receiver unit will illuminate to indicate the unit is
receiving power from the local transmitter unit through PoC
technology.

8. Turn on the power to the HDMI source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a
signal is being received from the source.

9. The (orange) RJ45 LED will illuminate on both the local

transmitter and remote receiver units to indicate a signal is
being received from the source to display. The screen should
now display on the connected monitor.

18

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

Notes:

• Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid

wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable or cable with a
gauge (AWG) size higher than 24 AWG will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite N202­Series Cat6 cables are made with 24 AWG solid wire cabling.

• The installation diagram shows the B127A-111-BHTH and

B127A-110-BH installation.

19

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

B127A-110-BH
transceiver

IR Control
Pad

IR Sensor

Monitor

HDR Player

Up to 230 ft. Cat6 solid cable at 4K/60 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/60 Hz
Toslink cable

IR Control
Pad

IR Sensor

Level 1

TV

IR Control
Pad

IR Sensor

Level 2

TV

IR Control
Pad

IR Sensor

Level 3

TV

IR Control
Pad

IR Sensor

Level 4

TV

20

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

1. Make sure all equipment in the installation—such as TVs,

Blu-ray players and the transmitter—is powered OFF.

2. Connect the HDMI source to the INPUT port on the

B127A-111-BHTH using a Tripp Lite P568-Series HDMI
Cable.

3. Connect a local monitor to the LOCAL HDMI port using a

Tripp Lite P568-Series HDMI Cable.

4. Connect the external power supply to the local unit and plug

it into a Tripp Lite surge protector, power distribution unit
(PDU) or uninterruptible power supply (UPS). The green RJ45
LEDs will illuminate to indicate power is being received from
the external power supply.

5. Using Cat5e/6 cable, connect one of the RJ45 output ports

on the local unit to the RJ45 input port on the
B127A-110-BH transceiver unit.

6. Connect a monitor to the HDMI OUTPUT port on the

transceiver unit using a Tripp Lite P568-Series HDMI Cable.

7. The green power LED and the green RJ45 LEDs on the

transceiver will illuminate to indicate the unit is receiving
power. Up to four units can be daisy-chained (three
transceivers and one receiver). To connect additional
transceiver units, proceed to step 8. To finish your
installation with a B127A-110-BH unit, proceed to step 12.

21

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

8. Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the

B127A-111-BHTH receiver unit to the RJ45 INPUT port on
B127A-110-BH.

9. Connect a monitor to the HDMI OUTPUT port on the

B127A-110-BH that you just added using a Tripp Lite
P568-Series HDMI Cable.

10. Connect the external power supply to the B127A-110-BH

and plug it into a Tripp Lite surge protector, power
distribution unit (PDU) or uninterruptible power supply
(UPS). The green power LED and the green RJ45 LEDs will
illuminate to indicate the unit is receiving power.

11. To add a second B127A-110-BH, repeat steps 8 through

10. To finish your installation with a B127A-110-BH,
proceed to step 12.

12. Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the

last B127A-110-BH to the RJ45 INPUT port.

13. Connect a monitor to the HDMI OUTPUT port on the

B127A-110-BH using a Tripp Lite P568-Series HDMI Cable.

14. The green LED on the B127A-110-BH will illuminate to

indicate the unit is receiving power from the previous
transceiver. The orange LED will illuminate to indicate the
unit is connected to a powered ON remote/repeater unit.

15. Turn on the power to the HDMI source. The orange RJ45

LEDs on the local unit will illuminate to indicate a signal is
being received from the source.

22

Transceiver Daisy-Chain Installation

(B127A-110-BH only)

16. If necessary, use the Equalization control on the remote/

repeater unit(s) and remote receiver unit to adjust the video
image.

17. The maximum number of daisy-chain layers is four for a total

distance of 920 ft., but the distance can be extended to
1,090 ft. when a B127A-010-H signal booster is used. See
the B127A-010-H product features for details.

Note: An improper Equalization setting can cause the monitor not

to display a picture at all. Try each Equalization setting until an
acceptable picture is displayed.

23

USB/IR/Toslink Controls

The extender kit provides the following functional controls:

• USB 1.1 – One Micro-USB input at transmitter, dual USB-A
outputs at receiver

• Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter
and receiver

• Toslink output at receiver and transceiver

(Optional) Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.

Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray player, etc.).

(Optional) With a user-supplied USB Micro-B cable (such as
Tripp Lite U050-XXX Series USB cable), connect to the
transmitter’s Micro-B port. Then connect a keyboard and mouse
to the available USB-A ports on the receiver unit.

(Optional) Using a Toslink cable (such as Tripp Lite A102-XXM
Series cables), connect the Toslink cable to a set of speakers, an
audio receiver or other audio system equipped with Toslink digital
outputs.

24

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and
workmanship for a period of one (1) year from the date of initial purchase.
TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you
must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an
authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an
authorized TRIPP LITE service center with transportation charges prepaid and must
be accompanied by a brief description of the problem encountered and proof of date
and place of purchase. This warranty does not apply to equipment which has been
damaged by accident, negligence or misapplication or has been altered or modified
in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software, loss of data,
costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

25

Warranty and Product Registration

WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately
becomes waste

WARNING

Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or
to significantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to
change without notice. Photos and illustrations may differ slightly from actual products.

26

27

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

28

20-12-086 93-3CC9_RevB