Tripp-Lite B127-2A1-HH Data Sheet

This product supports 4K 60Hz 4:4:4 subsampling for HDR televisions. To ensure optimal performance,
check the factory default settings on your display:

●

Frequency (Hz) should be set to 60 Hz

●

HDR feature should be enabled

●

HDMI input settings should be set to 2.0

●

UHD Deep Color should be set to ON

1 x 2 HDMI over Cat6 Extender/Splitter Kit,
Transmitter/Receiver, PoC, 4K @ 60 Hz, 4:4:4, Up
to 125 ft., TAA

MODEL NUMBER: B127-2A1-HH

Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 2 projectors, monitors or
HDTVs up to 125 ft. away.

Features

HDMI Splitter Ideal for Digital Signage or Displaying Video in Schools or Trade Show BoothsThis

complete transmitter and receiver system is recommended for home theaters and video presentations in
conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other
digital signage applications where the source and display are farther apart than conventional A/V cables
allow. The B127-2A1-HH splits and extends a 4K video and stereo audio signal from an HDMI source
device to two HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power BricksBuilt-in
Power over Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange
LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a
signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the
freedom to place the receiver away from an AC outlet.
Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 ColorThe B127-2A1-HH
supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160) at 60 Hz with full, rich uncompressed
DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the
image quality at the remote displays with no time-consuming manual fiddling needed. The splitter is
capable of carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter
whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no
complications. This kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your
HDTV as a PC monitor.
Plug-and-Play Operation for Quick Setup and Immediate UseThe included transmitter and receiver
units work right out of the box with no software required. Mounting hardware is included for installing the
units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receiver to the
displays with user-supplied HDMI cables (such as Tripp Lite’s P568- or P569-Series). Then, connect the
two units using Cat6 Ethernet cable (such as Tripp Lite N202-Series cable). Connect an optional display

Highlights

●

Supports UHD resolutions up to
4K x 2K (3840 x 2160) @ 60 Hz,
as specified for HDMI 2.0, for
crystal-clear 4K video

●

Power over Cable (PoC)
technology provides power to
the receiver via Cat6 cable

●

Transmitter’s local port shows
you the UHD image being
displayed up to 125 ft. away

●

Supports High Dynamic Range
(HDR) for richer contrast and
expanded color accuracy

●

Plug-and-play operation with no
software required for easy,
immediate installation

Applications

●

Connect a media server, Blu-ray
player, cable/satellite box, Roku,
gaming system or other home
theater component to large­screen 4K televisions or
projectors

●

Upgrade the video quality of
your trade show presentation or
digital signage installation in a
commercial or educational
setting to 4K x 2K

●

Set up digital signage with a
single video signal being
transmitted to multiple displays

System Requirements

●

Source device with HDMI output
(Blu-ray player, cable box,
laptop)

●

Display devices with HDMI input

1 / 4

to the transmitter’s local HDMI output to monitor the image connected to the receiver up to 125 feet away.
TAA-Compliant for GSA Schedule PurchasesThe B127-2A1-HH is compliant with the Federal Trade
Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and
other federal procurement contracts.

Specifications

OVERVIEW

UPC Code 037332253880

(HDTV, projector, monitor)

Package Includes

●

Transmitter unit

●

Receiver unit

●

External power supply (Input:
100–240V)

●

(4) International plug adapters
(North America, Europe, U.K.
and Australia)

●

Mounting hardware

●

Owner’s manual

INPUT

Voltage Compatibility (VAC) 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
External Power Supply Input Specs

(V / Hz / A)
External Power Supply Output

Specs (V / A)
External Power Supply Cord Length

(ft.)
External Power Supply Plug(s) AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America
External Power Supply Certifications CCC; CE; FCC; GS; TUV; UL; cUL

USER INTERFACE, ALERTS & CONTROLS

LED Indicators Tx: x1 Green (Power), x2 Orange (Local, Output); Tx RJ45 port: Green (Connected), Orange (Activity)

PHYSICAL

Color Black
Material of Construction Metal
Rackmountable Yes
Receiver Unit Dimensions (hwd / in.) 1.06 x 4.53 x 2.46

100-240V~50/60Hz, 0.6A

24V/1A

4.5

Rx: x1 Green (Power); x2 Orange (Output); Rx RJ45 port: Green (Connected), Orange (Activity)

Receiver Unit Weight (lbs.) 0.45

2 / 4