Tripp-Lite B127-200-H Data Sheet

This product supports 4K 60Hz 4:4:4 subsampling for HDR televisions. To ensure optimal performance,
check the factory default settings on your display:

●

Frequency (Hz) should be set to 60 Hz

●

HDR feature should be enabled

●

HDMI input settings should be set to 2.0

●

UHD Deep Color should be set to ON

2-Port HDMI over Cat6 Active Remote Receiver
for Video/Audio, PoC, 4K @ 60 Hz, Up to 125 ft.,
TAA

MODEL NUMBER: B127-200-H

Works with Tripp Lite B127-Series transmitters to extend 4K audio/video via Cat6 cable to 2 HDMI
displays up to 125 ft. away.

Features

2-Port Receiver Extends HDMI Signals for 4K Digital Signage or Video PresentationsThis box-style

active remote receiver works in tandem with Tripp Lite’s B127-002-H or B127-004-H transmitter to extend
4K video (at 60 Hz) and 7.1 audio from an HDMI source to two HDMI displays up to 125 feet using Cat6
cabling. It can also extend a 4K HDMI signal (at 30 Hz) up to 150 feet and a 1080p HDMI signal (at 60 Hz)
up to 200 feet.
An Ideal Setup for Settings Where Conventional HDMI Cables Can’t ReachThe B127-200-H is
recommended for home theaters and video presentations in conference rooms, schools, trade shows,
meeting facilities, houses of worship, retail settings and other digital signage applications where the
source and display are farther apart than conventional A/V cables allow.
Built-In PoC Technology Provides Power to Avoid Bulky External Power BricksBuilt-in Power over
Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange LEDs will light
up to indicate the unit is receiving power and a signal is being received. PoC lets you avoid the hassle of a
bulky power brick and gives you the freedom to place the receiver away from an AC outlet.
Supports Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 ColorThe B127-200-H
supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160) at 60 Hz, as specified in HDMI 2.0, with
full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization
automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling
needed. The receiver is capable of carrying HDR signals, which provide a wide range of vibrant colors
with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes
and Netflix content with no complications. The B127-200-H also supports 4:4:4 chroma subsampling for
top-level PC gaming or using your HDTV as a PC monitor.
Plug-and-Play Operation for Quick Setup and Immediate UseThe receiver works right out of the box
with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack.

Highlights

●

Requires Tripp Lite B127-002-H
or B127-004-H transmitter to
extend HDMI signals

●

Supports UHD resolutions up to
4K x 2K (3840 x 2160) @ 60 Hz,
as specified in HDMI 2.0, for
crystal-clear 4K video

●

Power over Cable (PoC)
technology provides power to
the receiver via Cat6 cable

●

Supports High Dynamic Range
(HDR) for richer contrast and
expanded color accuracy

●

Plug-and-play operation with no
software required for easy,
immediate installation

Applications

●

Connect a media server, Blu-ray
player, cable/satellite box, Roku,
gaming system or other home
theater component to large­screen 4K televisions or
projectors

●

Upgrade the video quality of
your trade show presentation or
digital signage installation in a
commercial or educational
setting to 4K x 2K

●

Set up digital signage with a
single video signal being
transmitted to multiple displays

System Requirements

●

Tripp Lite B127-002-H or B127­004-H transmitter

●

Display devices with HDMI input
(HDTV, projector, monitor)

1 / 3

Connect the receiver to the display with a user-supplied high-speed HDMI cable (such as Tripp Lite’s
P568- or P569-Series) and to the transmitter with Cat6 Ethernet cable (such as Tripp Lite N202-Series
cable).
TAA-Compliant for GSA Schedule PurchasesThe B127-200-H is compliant with the Federal Trade
Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and
other federal procurement contracts.

Package Includes

●

B127-200-H 2-Port HDMI over
Cat6 Active Remote Receiver

●

Mounting hardware

●

Owner’s manual

Specifications

OVERVIEW

UPC Code 037332253866

USER INTERFACE, ALERTS & CONTROLS

LED Indicators Rx: x1 Green (Power) x2 Orange (Output) ; Rx RJ45 port: Green (Connected), Orange (Activity)

PHYSICAL

Color Black
Material of Construction Metal
Rackmountable Yes
Unit Dimensions (hwd / in.) 1.06 x 4.53 x 2.46
Unit Packaging Type Box
Unit Weight (kg) 0.20
Unit Weight (lbs.) 0.45

ENVIRONMENTAL

Operating Temperature Range 32 to 104°F (0 to 40°C)
Storage Temperature Range 5 to 122°F (-15 to 50°C)
Relative Humidity 0% to 85% RH, Non-Condensing

COMMUNICATIONS

Signal Range (ft.) 125
Signal Range (m) 38

CONNECTIONS

Ports 2
Side A - Connector 1 (2) HDMI (FEMALE)
Side B - Connector 1 RJ45 (FEMALE)

2 / 3