Tripp Lite B127-1A1-CH Owner’s Manual

Owner’s Manual

4K 60 Hz USB Type-C™ to

HDMI over Cat6 Extender

Model: B127-1A1-CH

USB Type-C and USB-C are trademarks of USB Implementers Forum

Español 9 • Français 17 • Русский 25

WARRANTY REGISTRATION

win an ISOBAR surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Package Contents

• Local Transmitter Unit

• Receiver Unit

• External Power Supply (Input: 100-240V, Output: 24V 1A)

• Plug Adapters: NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (UK) and AS/NZS 3112 (Australia)

• Mounting Hardware

• Owner’s Manual

Optional Accessories

• N202-Series Cat6 24 AWG Solid-Wire Patch Cable

• P569-XXX-CERT or P568-XXX-2A-Series High-Speed HDMI 2.0 Cables

• U420-Series USB-C Cables

Product Features

• Extends a 4K (3840 x 2160 @ 60 Hz) 4:4:4 signal up to 125 ft. (38 m) from the source.

• USB-C PD 3.0 port provides device charging while supporting an input up to 60W (20V 3A).

• Built-in local HDMI port supports multi-resolution technology, enabling the connection of local monitors of various resolutions without affecting the extended 4K @ 60 Hz signal.

• Remote Receiver unit features built-in equalization (EQ) control and auto EDID image adjustment.

• Includes mounting hardware that enables both the local transmitter and remote receiver units to be wall-mounted, rack-mounted or pole-mounted.

• Supports 8-Channel LPCM, AC-3, DTS digital audio and USB Type-C 1.2.

• Plug-and-play – no software or drivers required.

Disclaimer

Before installation, check the following settings of your source(s) and TV/monitor(s):

1. Set to display at 60 Hz. Double-check factory settings, as the

default may be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0.

Some displays may have default setting at HDMI 1.4.

3. Verify your monitor has the HDR feature enabled. Some

displays may have this feature disabled as a factory setting.

4. Conﬁrm the Ultra HD (UHD) Deep Color setting is enabled on

your TV/monitor. Conﬁrm with your TV/monitor manufacturer which HDMI ports support UHD Deep Color.

Note: If you wish to connect a local monitor to your installation, depending on your TV/monitor make/model, the UHD Deep Color setting may need to be disabled on your local TV/monitor to achieve 4K 60 Hz resolution.

Mounting Instructions

Mounting hardware is included to allow for a variety of mounting methods. The following images illustrate how the included mounting brackets can be attached for different installations.

Wall-Mount

19"-Wide Rack-Mount Pole-Mount

Installation

Notes:

1) Test to ensure the entire installation works properly before pulling

cables through ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-

wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in a shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.

3) External power is not required for remote receiver units due to Power

over Cable (PoC) technology incorporated in the transmitter units.

B127-1A1-CH Extender Kit

MONITOR NOTEBOOK

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

Up to 9 ft. (2.7 m) Type-C cable at 4K/60 Hz

LOCAL TRANSMITTER

Up to 125 ft. (38 m) at 4K/60 Hz

REMOTE

RECEIVER

1. Ensure all equipment in the installation – such as TVs/

monitors, laptops and the transmitter – is powered OFF.

2. Using a USB Type-C cable (such as Tripp Lite U420-Series

cables), connect the USB-C source to the INPUT port on the local transmitter unit.

Installation

3. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A-Series cables), connect the HDMI source to the LOCAL port on the local transmitter unit.

4. Optional: Using your source’s PD power adapter, plug the

USB-C connector into the CHARGE IN port on the local transmitter unit. The USB-C PD 3.0 port supports input up to 60W (20V 3A).

5. Using Cat6 cable, connect the RJ45 port on the local

transmitter unit to the RJ45 port on the remote receiver unit.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT

or P568-XXX-2A-Series cables), connect the remote receiver unit’s HDMI port to a monitor.

7. Turn on the power to your connected TVs/monitors. The LOCAL

(orange) LED will illuminate to indicate the local port has been connected to a display.

8. Connect the external power supply to the local transmitter

unit and plug it into an available wall outlet or (optional) a Tripp Lite Surge Protector, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The POWER (green) LED on the local transmitter unit will illuminate to indicate the unit is receiving power from the external power supply. The POWER (green) LED on the remote receiver unit will illuminate to indicate the unit is receiving power from the local transmitter unit through PoC technology.

9. Turn on the power to the USB-C source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a signal is being received from the source.

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without notice. Photos and illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-02-173 93-3C55_RevA

Manual del Propietario

Extensor USB Tipo C™ a

HDMI sobre Cat6 4K 60 Hz

Modelo: B127-1A1-CH

USB Tipo C y USB C son marcas comerciales registradas del

English 1 • Français 17 • Русский 25

1111 W. 35th Street, Chicago, IL 60609 EE UU • tripplite.com/support

USB Implementers Forum

Contenido del Empaque

• Unidad Transmisora Local

• Unidad Receptora

• Fuente de Alimentación Externa (Entrada: 100V ~ 240V), Salida: 24V 1A)

• Adaptadores de Clavija: NEMA 1-15P (Norteamérica), CEE 7/16 Schuko (Europa), BS 1363 (Reino Unido) y AS/NZS 3112 (Australia).

• Accesorios de Instalación

• Manual del Propietario

Accesorios Opcionales

• Cable Patch Cat6 de Alambre Sólido 24 AWG de la Serie N202

• Cables HDMI 2.0 de Alta Velocidad Serie P569-XXX-CERT o P568-XXX-2A

• Cables USB C de la Serie U420

+ 22 hidden pages