Tripp-Lite B127-1A1-CH Data Sheet
This product supports 4K 60 Hz 4:4:4 subsampling for HDR displays. To ensure optimal performance,
check the factory default settings on your display:
●
Frequency should be set to 60 Hz
●
HDR feature should be enabled
●
HDMI input settings should be set to 2.0
●
UHD Deep Color should be set to On
USB-C to HDMI over Cat6 Extender Kit,
Transmitter/Receiver, PD 3.0, PoC, HDR, 4K @ 60
Hz, 4:4:4, 125 ft., TAA
MODEL NUMBER: B127-1A1-CH
Transmitter/receiver kit extends a 4K A/V signal via Cat6 cable from a USB-C tablet or laptop to an HDMI
display up to 125 ft. away.
Features
USB-C to HDMI Extender for Displaying Video in Boardrooms and Conference Rooms This
complete transmitter and receiver system is recommended for video presentations in conference rooms,
schools, trade shows, meeting facilities, houses of worship, retail settings and digital signage applications
where the source and display are farther apart than conventional A/V cables allow. The B127-1A1-CH
extends 4K video and stereo audio signals from a USB-C source device to an HDMI display up to 125 feet
away via user-supplied Cat6 Ethernet cabling.
Supports USB DisplayPort Alternate Mode for Converting Audio/Video SignalsBy connecting a
USB-C cable to a source device that supports DisplayPort Alt Mode, you can output 4K video and digital
audio to an HDMI monitor, television or projector without installing special software drivers.
Transmits Crystal-Clear 4K HDMI Video with HDR and 4:4:4 ColorThe B127-1A1-CH supports Ultra
HD video resolutions up to 4K x 2K (3840 x 2160) at 60 Hz, as specified in HDMI 2.0, with 8-channel
LPCM, AC-3 and DTS digital audio. Built-in equalization automatically fine-tunes the image quality at the
remote display with no time-consuming manual fiddling needed. The extender is capable of carrying HDR
signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper
blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This
kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power BricksPower
over Cable (PoC) technology powers the remote receiver over Cat6 cable. Green and orange LEDs on
both the transmitter and receiver will light up to indicate the system is receiving power and a signal is
being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to
place the receiver away from an AC outlet.
PD 3.0 Charging Port Charges the Source Device to Avoid Battery Drain and Signal LossThe USBC Power Delivery port provides power output up to 20V 3A (60W), which is sufficient wattage for charging
and powering the connected source device, such as a MacBook Pro or Windows laptop. Connect the
Highlights
●
Supports UHD resolutions up to
4K @ 60 Hz (4:4:4), as specified
in HDMI 2.0, for crystal-clear
video
●
USB-C PD 3.0 port charges
source device to avoid battery
drain and untimely shutdowns
●
Power over Cable (PoC)
technology provides power to
the receiver via Cat6 cable
●
Transmitter’s local port shows
you the UHD image being
displayed up to 125 ft. away
●
Supports High Dynamic Range
(HDR) for richer contrast and
expanded color accuracy
Applications
●
Connect a MacBook Pro,
Windows laptop or notebook to
a 4K display in a large
conference room or meeting
room for a video or PowerPoint
presentation
●
Upgrade the video quality of
your trade show presentation or
digital signage in a commercial
or educational setting
●
Stream Netflix, Amazon Prime,
Hulu and other home
entertainment channels to your
HDTV or projector
System Requirements
●
Source device with USB-C
output (iPad, tablet,
smartphone) that supports USB
DisplayPort Alternate Mode
1 / 4
device’s power supply or power adapter between the USB-C PD 3.0 port and an available AC outlet to
prevent the source from running out of power prematurely.
Local HDMI Port Supports Multi-Resolution TechnologyConnect a display to the transmitter’s HDMI
port to monitor the image being sent to the remote display. The port allows connection of displays of
various resolutions without affecting the 4K @ 60 Hz transmission extended to the remote receiver.
Plug-and-Play Operation for Quick Setup and Immediate UseThe included transmitter and receiver
units work right out of the box with no software required. Mounting hardware is included for installing the
units on walls, poles or 19-inch racks. Connect the transmitter to the source with a USB Type-C cable
(such as Tripp Lite’s U420-Series) and the receiver to the display with an HDMI cable (Tripp Lite’s P568or P569-Series). Then, connect the two units using Cat6 Ethernet cable (Tripp Lite N202-Series cable).
TAA-Compliant for GSA Schedule PurchasesThe B127-1A1-CH is compliant with the Federal Trade
Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and
other federal procurement contracts.
Specifications
●
Display devices with HDMI input
(HDTV, projector, monitor)
Package Includes
●
Transmitter
●
Receiver
●
External power supply (Input:
100–240V, 50/60 Hz, 0.6A;
Output: 24V 1A)
●
(4) International plug adapters
(North America, Europe, U.K.,
Australia)
●
Mounting hardware
●
Owner’s manual
OVERVIEW
UPC Code 037332253941
INPUT
Voltage Compatibility (VAC) 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
External Power Supply Input Specs
(V / Hz / A)
External Power Supply Output
Specs (V / A)
External Power Supply Cord Length
(ft.)
100-240V~50/60Hz, 0.6A
24V/1A
4.5
External Power Supply Plug(s) AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America
External Power Supply Certifications CCC; CE; FCC; GS; TUV; UL; cUL
USER INTERFACE, ALERTS & CONTROLS
LED Indicators Tx: x1 Green (Power), x2 Orange (Local, Output); Tx RJ45 port: Green (Connected), Orange (Activity)
Rx: x1 Green (Power); Rx RJ45 port: Green (Connected), Orange (Activity)
PHYSICAL
Color Black
Material of Construction Metal
Rackmountable Yes
2 / 4
Loading...