Tripp Lite B126-2A1, B126-2A0 Owner's Manual

Owner's Manual

2-Port HDMI over Cat5/6

Extenders

Models: B126-2A1, B126-2A0

Este manual esta disponible en español en la página de Tripp Lite:

Ce manuel est disponible en français sur le site Web de Tripp Lite :

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

tripplite.com

tripplite.com/warranty

Package Contents

• B126-2A1 Kit or B126-2A0 Receiver Unit

• External Power Supply (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)

• Mounting Hardware

• Screwdriver for Equalization Adjustment

• Owner’s Manual

Product Features

• Extends an HDMI signal to 2 monitors up to 200 ft. from the source over a single Cat5/6 cable.

• B126-1A0 receiver requires a Tripp Lite B126-002 or B126-004 transmitter (sold separately).

• Extends a 1080p (60 Hz) signal up to 150 ft. from the source using Cat6 cabling or up to 125 ft. using Cat5 cabling.

• Extends a 1080i (60 Hz) signal up to 200 ft. from the source using Cat6 cabling or up to 175 ft. using Cat5 cabling.

• Use 24 AWG solid wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, to achieve maximum distance and resolution.

• Further expand the range and number of monitors by adding B126-110 repeater units (sold separately).

• Add up to 3 repeaters on each Cat5e/6 channel for a total of 4 displays per channel (an active remote receiver should be the last unit

in a channel).

• A 1080p (60 Hz) signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i (60 Hz) signal when using either Cat5e or Cat6 cabling).

• Supports 24-bit True Color (8 bits per channel).

• Built-in equalization control adjusts the video image.

Product Features

• Supports both stereo and 7.1-channel surround sound audio

(7.1-channel surround sound signal will be Multi-Channel or PCM).

• HDCP and 3D compatible.

• Plug-and-play operation with no software to download and install.

• Compatible with all operating systems.

• Mounting hardware included.

Optional Accessories:

• B126-110 HDMI over Cat5/6 Remote Repeater

• N202-Series Cat6 24 AWG Solid Wire Patch Cables

• P568-Series High-Speed HDMI Cables

Mounting Instructions

The B126-2A1 and B126-2A0 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods.

Note: The images below show a B126-1A1 HDMI over Cat5 Receiver Unit, but the mounting hardware installation is the same for the B126-2A1 and B126-2A0.

Wall-Mount 1 Wall-Mount 2

19” Rack-Mount Pole-Mount

Standard 1 x 2 Extender Kit Installation

Notes:

1. Test to make sure that the entire installation works properly before running cables through ceilings/walls.

2. 24 AWG solid wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, is required to achieve maximum distance and resolution.

3. The diagram below shows the maximum extension distance when using Cat6 cabling. When using Cat5 cabling, the maximum extension distance is 175 ft. at 1080i (60 Hz) and 125 ft. at 1080p (60 Hz).

4. The B126-2A1 is set to transmit a stereo audio signal by default. Press the Audio button on the transmitter unit to switch to 7.1-channel surround sound audio. (7.1-channel surround sound signal will be Multi-Channel or PCM)

BLU-RAY

LOCAL OUT OUTPUT

Optional

OPTIONAL LOCAL

Local Monitor

MONITOR

MONITOR 1

Local

LOCAL

Transmitter

TRANSMITTER Up to 200 ft. at 1080i @ 60 Hz (Cat6)

Up to 200 ft. at 1080i (60 Hz) (Cat6)

Up to 150 ft. at 1080p @ 60 Hz (Cat6)

Up to 150 ft. at 1080p (60 Hz) (Cat6)

Remote

REMOTE

Receiver

RECEIVER

Monitor 1

OUTPUT 1 OUTPUT 2

Monitor 2

MONITOR 2

Standard 1 x 2 Extender Kit Installation

Make sure all devices being connected are powered OFF.

Connect the HDMI source to the INPUT port on the transmitter unit using a Tripp Lite P568-Series High-Speed HDMI Cable.

Optional: Connect a monitor to the LOCAL port on the transmitter unit using a Tripp Lite P568-Series High-Speed HDMI Cable.

Connect the external power supply to the transmitter unit and plug the transmitter unit into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The green RJ45 LED illuminates to indicate that the unit is receiving power from the external power supply.

Using Cat5e/6 cable, connect the RJ45 port on the transmitter unit marked OUTPUT to the RJ45 port on the receiver unit marked INPUT.

Connect the external power supply to the receiver unit and plug the receiver unit into a Tripp Lite Surge Suppressor, PDU or UPS. The green RJ45 LED illuminates to indicate that the unit is receiving power from the external power supply.

Connect a monitor to the OUTPUT 1 port on the receiver unit using a Tripp Lite P568-Series High-Speed HDMI cable.

Repeat step 7 for the OUTPUT 2 port on the receiver unit.

Turn on the power to the connected devices. The orange RJ45 LED’s on the transmitter and receiver units illuminate to indicate that a signal is being received from the HDMI source. The video image will now be displayed on the connected monitors.

If necessary, use the Equalization control on the receiver unit to adjust the video image.

Note: An improper Equalization setting can cause the monitor not to display an

image at all. Try each setting until an acceptable image is displayed.

+ 14 hidden pages