1
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
Owner’s Manual
HDMI over Cat5 Extender Kit
with Power over Cable (PoC)
Model: B126-1P1M-U-POC
Español 9 • Français 17 • Pусский 25
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
17-01-160-9336A1.indb 1 2/22/2017 2:52:48 PM
2
Product Features
Package Contents
Optional Accessories
• Extends a 1080i signal up to 100 ft. from the source, or a 1080p
(60 Hz) signal up to 50 ft. from the source
• Built-in Power over Cable (PoC) technology powers the receiver unit over
Cat5e/6/6a cable
• Additional HDMI port on the transmitter unit connects to a local monitor
• Transmitter’s built-in HDMI cable connects directly to the HDMI source
• Ultra low-profile receiver unit with built-in HDMI connector connects
directly to HDMI display for discreet placement
• HDCP and 3D compliant
• Supports up to 7.1 channel surround sound (multi-channel or PCM) audio
• Plug-and-play; no software or drivers required
• Transmitter Unit
• Receiver Unit
• USB-A to USB Micro-B Cable – 1 ft.
• USB-A to USB Micro-B Cable – 3 ft.
• Owner’s Manual
• N202-Series Cat6 24 AWG Solid Wire Patch Cables
• P568-Series High-Speed HDMI Cables
17-01-160-9336A1.indb 2 2/22/2017 2:52:48 PM
3
Extender Kit Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6/6a
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made of 24 AWG solid wire cabling.
OPTIONAL LOCAL DISPLAY
1080p DISPLAY
USB Power
(to source or USB wall charger)
Up to 100 ft.
at 1080i
Up to 50 ft.
at 1080p (60Hz)
Blu-ray™ PLAYER
1. Make sure the HDMI source is powered OFF.
2. Connect the transmitter unit’s built-in HDMI connector to the HDMI
source.
3. Optional: Connect a local monitor to the LOCAL port on the transmitter
unit.
4. Use the included USB Micro-B cable to connect the transmitter unit to a
USB wall charger or a USB port from the source.
17-01-160-9336A1.indb 3 2/22/2017 2:52:48 PM
4
Extender Kit Installation
5. Using Cat5e/6 cable, connect the transmitter unit’s RJ45 port to the
receiver unit’s RJ45 port. The green RJ45 LEDs on the transmitter and
receiver units will illuminate to indicate the units are receiving power.
The orange RJ45 LED on the receiver illuminates to indicate the unit is
connected to a powered-on transmitter.
6. Connect the receiver unit’s HDMI connector to the monitor’s HDMI port.
7. Turn on the power to the HDMI source. The orange RJ45 LED on the
transmitter unit will illuminate to indicate a signal is being received from
the source.
Note: The transmitter unit’s USB Micro-B power cable provides sufficient power for
most displays. However, in the event additional power is needed, a USB Micro-B
port is provided on the receiver unit. If no image displays after following the
installation instructions, use the included USB Micro-B cable to connect the receiver
to the monitor’s USB port or a USB wall charger.
17-01-160-9336A1.indb 4 2/22/2017 2:52:48 PM
5
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions, try these troubleshooting tips.
1. Is the included USB cable connecting the transmitter unit’s
USB Micro-B port to a power source for additional power? For
the product to function properly, the transmitter unit’s USB Micro-B
port must be connected to a USB port from the source or a USB wall
charger.
2. No image displays after following the installation instructions. The
transmitter unit’s USB Micro-B power cable provides sufficient power for
most displays. However, in the event additional power is needed, a USB
Micro-B port is provided on the receiver unit. If no image displays after
following the installation instructions, use the included USB Micro-B
cable to connect the receiver to the monitor’s USB port or a USB wall
charger.
3. Was the power to the HDMI source turned off prior to installation?
If not, restart it.
4. What resolution are you trying to attain? See the Product Features
and Extender Kit Installation sections in this manual for details on
maximum distance and resolution. The shorter the extension distance,
the higher the resolution you will be able to obtain. If you are not able
to receive an acceptable image, try lowering the computer’s video
resolution or adjusting the refresh rate.
5. What type of cabling are you using? Inferior cabling can result in
poor performance. It is important the cables used can support the video
resolution you are trying to attain. To achieve maximum distance and
resolution, 24 AWG solid wire UTP cable (such as Tripp Lite’s
N202-Series cables) must be used.
6. Test your cables to ensure they are working properly. For example,
connect your Cat5e/6/6a cable between a computer and a network to
verify it establishes a network connection.
17-01-160-9336A1.indb 5 2/22/2017 2:52:48 PM
6
Troubleshooting
7. Are any patch panels or other devices installed between the
transmitter and receiver units? Tripp Lite’s HDMI over Cat5 Extender
Kit was designed to be connected directly from the transmitter to the
receiver via UTP cable. The more connection points between the source
and the remote monitors, the more likely signal degradation will occur,
causing poor performance. If a patch panel or other device is between
the transmitter and receiver units, it should be removed from the
installation.
8. Is a splitter, switch or other device installed between the video
source and transmitter, or between the receivers and displays?
Tripp Lite’s HDMI over Cat5 Extender Kit was designed for the
transmitter to connect directly with the video source and for the receiver
to connect directly to the display. If a splitter, switch, or other device is
between the video source and transmitter or between the receiver and
display, it should be removed from the installation.
9. Check your cabling for any damage that may have occurred during
installation. If a cable connector is loosened from pulling through
ceilings/walls or if the cable jacket is damaged, causing the wiring to be
exposed, you will not be able to achieve maximum performance.
10. Are the transmitter and/or receiver units located in an area
that exposes them to elevated temperatures? If the product is
overheating, it will not function properly.
17-01-160-9336A1.indb 6 2/22/2017 2:52:48 PM
7
Warranty & Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period
of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited
to repairing or replacing (at its sole option) any such defective products. To obtain service under
this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized
TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty does
not apply to equipment, which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s)
or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the
user’s authority to operate this equipment.
17-01-160-9336A1.indb 7 2/22/2017 2:52:48 PM
8
Warranty & Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Tripp Lite they
are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety or
effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
17-01-160-9336A1.indb 8 2/22/2017 2:52:48 PM
9
1111 W. 35th Street, Chicago, IL 60609 EE. UU. • www.tripplite.com/support
Copyright © 2017 Tripp Lite. Todos los derechos reservados.
Manual del Propietario
Juego Extensor HDMI sobre
Cat5 con Energía por Cable
(PoC)
Modelo: B126-1P1M-U-POC
English 1 • Français 17 • Pусский 25
17-01-160-9336A1.indb 9 2/22/2017 2:52:48 PM
10
Características del Producto
Contenido del Empaque
Accesorios Opcionales
• Extiende una señal 1080i hasta a 30.5 m [100 pies] de la fuente o una
señal 1080p (60Hz) hasta a 15.24 m [50 pies] de la fuente
• La tecnología de Energía por Cable (PoC) alimenta al receptor sobre un
cable Cat5e / 6 / 6a
• El puerto HDMI adicional en la unidad transmisora se conecta a un
monitor local
• El cable HDMI incorporado del transmisor se conecta directamente a la
fuente de HDMI
• La unidad receptora de ultra bajo perfil con conector HDMI incorporado
se conecta directamente a la pantalla HDMI para una colocación discreta
• Compatible con HDCP y 3D
• Soporta audio de sonido envolvente de hasta 7.1 canales (Multi-canal o
PCM)
• Conectar y usar—No requiere software ni controladores
• Unidad Transmisora
• Unidad Receptora
• Cable USB-A a USB Micro-B – 30.5 cm [1 pie]
• Cable USB-A a USB Micro-B – 0.91 m [3 pies]
• Manual del Propietario
• Cables Patch Cat6 de Alambre Sólido 24 AWG Serie N202
• Cables HDMI de Alta Velocidad Serie P568
17-01-160-9336A1.indb 10 2/22/2017 2:52:48 PM
Loading...