Tripp Lite B126-1A1-WHD1 User Manual

●

If you’re setting up multiple wireless extender kits, they should not be used within 165 ft. (50 m) of each
other

●

The B126-1A1-WHD1 broadcasts an SSID of HDbitT-TX. Please ensure network security will allow this
broadcast.

Wireless HDMI Extender Kit,
Transmitter/Receiver, IR Control, Dual Antennas,
2nd Receiver Option, Up to 165 ft. (50 m)

MODEL NUMBER: B126-1A1-WHD1

Extends a wireless HDMI 1080p (@ 60 Hz) audio/video signal to an HDMI display located up to 165 ft. (50
m) from the HDMI source device.

Features

All-in-One HDMI Wireless Extender for Displaying Video in Boardrooms and Conference
RoomsThis complete wireless HDMI transmitter and receiver system is recommended for video

presentations in conference rooms, trade shows, home theaters, bars, restaurants, schools, digital
signage and other applications in which connecting long video cables could be a burden. The B126-1A1­WHD1 extends 1080p video and stereo audio signals from an HDMI source device to an HDMI display up
to 165-ft. (50.29 m) away. No bulky or costly cabling infrastructure is needed.
Plug-and-Play Operation for Quick Setup and Immediate UseThe wireless HDMI audio/video
transmitter and receiver set works right out of the box with no software or drivers required. Mounting
hardware is included for installing the units on walls or other flat surfaces. Connect the receiver to the
display and the transmitter to the source with user-supplied HDMI cables (such as Tripp Lite's P568­Series). Then, connect the included IR cables for remote control, and plug the dual power supplies into an
AC outlet.
Wireless Transmission Saves You Money on Cable and Installation CostsThe B126-1A1-WHD1
eliminates more than just hassles. You'll save on the costs of cabling infrastructure and the labor to install
it. Cable clutter is reduced, and you will enjoy more flexibility in placement of the source and display with
no cables to relocate when you want to reconfigure the room. The transmitter and receiver units
communicate over a 5 GHz wireless frequency that allows fast data transmission and reduced
interference from other wireless sources. Be sure the transmitter and receiver share a direct line of sight
for best results.
IR Pass-Through Technology Lets You Control the Video from an Extended DistanceThe IR cables
let you control your source device with its remote (play, pause, fast forward, etc.), while you're standing
near the receiver located up to 165-ft. (50.29 m) away. Make sure the transmitter's IR bulb is within sight
of the source and the receiver's IR bulb is in range of the source's remote.
Transmits Crystal-Clear 1080p Video for High-Definition PresentationsThe B126-1A1-WHD1 ensures
high-definition performance in a one-to-one application, where there is less obstruction to occur. It
supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz with 24-bit Deep Color (8 bits per channel)

Highlights

●

Display HDMI audio/video up to
165-ft. (50.29 m) away with no
costly cable installation

●

Supports connection of a 2nd
receiver up to 85-ft. (25.91 m)
away from the source

●

Transmits HD picture quality at
resolutions up to 1920 x 1080
(1080p) @ 60 Hz

●

IR pass through allows you to
use your source's remote while
near the display

●

Easy plug-and-play
operation—just connect the
transmitter and receiver and
play video

Applications

●

Connect a laptop for a video or
PowerPoint presentation in a
conference room or meeting
room, where the source device
changes frequently

●

Extend HDMI signals in an
indoor environment where
drilling through walls for cabling
is impossible or not practical

●

Gain flexibility in where the
source and display are placed,
with the freedom to move and
relocate them

●

Create a cleaner, streamlined
installation for a trade show
booth

●

Improve the line of sight for
digital signage in a restaurant,
store, school, airport or
entertainment venue

1 / 4

and stereo audio. AES 128 encryption protects your wireless transmissions. LEDs indicate when the
transmitter and receiver units are receiving power, transmitting data and connected to a wireless signal.

System Requirements

●

Source device with HDMI output
(Blu-ray player, cable box,
laptop)

●

Display device with HDMI input
(HDTV, projector, monitor)

Package Includes

●

Transmitter unit

●

Receiver unit

●

IR-In cable

●

IR-Out cable

●

(4) Antennas

●

(2) External power supplies
(Input: 100–240V, 50/60 Hz,

0.6A; Output: 5V 3A)

●

(8) International plug adapters
(North America, Europe, United
Kingdom, Australia)

●

Mounting hardware

●

Owner’s manual

Specifications

OVERVIEW

UPC Code 037332201201
Product Type Extender Kit
Technology HDMI; Wireless

VIDEO

Max Supported Video Resolution 1920x1080 (1080p @ 60Hz)
Max Supported Color Depth 24-bit True Color
3D Video Supported Yes
Maximum Signal Range (ft) 165
Maximum Signal Range (m) 50

AUDIO

2 / 4