Tripp-Lite APSX750 Catalog Page

750W PowerVerter APS 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2 C13 Outlets
MODEL NUMBER: APSX750
Description
The APSX750 750W PowerVerter APS 12V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of equipment ranging from power tools
and portable lighting to laptop computers and sensitive monitoring equipment. With no fumes, fuel or excess noise, it’s an excellent alternative to generator
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter,
standalone AC power source or extended-run UPS. It delivers 750W of continuous power, 1125W up to one hour, or 1500W of peak power up to 10 seconds
during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans, the APSX750 converts stored power from any 12V battery or
automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 230V AC source, the unit keeps the
user-supplied battery charged via a three-stage 5/20A selectable charging system while simultaneously delivering AC power to connected equipment.
When used as a UPS, the APSX750 responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on
the unit indicate load percentage and battery charge level.
Features
Reliable Power for Mobile, Emergency and Remote Sites
Generates safe, stable, computer-grade 230V AC power from 12V battery bank
Ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions
Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment
Functions as a vehicle inverter, standalone AC power source or extended-run UPS
Features dual C13 outlets
Unlimited runtime with variety of user-supplied batteries
Highlights
Delivers clean 230V AC power
from AC or DC source
750W continuous output power;
1500W peak power
Auto-transfer switching option for
UPS operation
Protects against blackouts,
surges and EMI/RFI line noise
Rugged polycarbonate housing
resists moisture and impact
Package Includes
APSX750 750W PowerVerter
APS 12V DC 230V AC
Inverter/Charger
Owner’s manual
1 / 4
Meets Normal and Peak Power Demands
750W of continuous power
1125W of reserve power up to 1 hr.
1500W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling
Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage
High-current DC input terminals for simple hardwired installation
Automatic Transfer Switching
Transfer relay switches to inverter power during blackout in 10 ms
3-position switch enables Auto, Charge Only or System Off mode
DIP switches configure high and low voltage auto-transfer
3-Stage 5/20A Selectable Battery Charger
Serves as battery charger when external 230V AC power is supplied and powering connected equipment
Protects battery from overcharging and overdischarging
Low-battery protection prevents excessive battery depletion
DIP switches configure wet/gel charging profiles
Optional Remote Control Capability
RJ45 port allows connection of optional remote control module, such as Tripp Lite’s APSRM4
Front-Panel LEDs
Indicate load percentage and battery charge level
Rugged Polycarbonate Housing
Resists moisture, vibration and impact
Built-in mounting feet for installation on any rigid horizontal surface
Specifications
OUTPUT
Nominal Output Voltage(s) Supported
230V
Frequency Compatibility 50 Hz
Output Receptacles (2) Universal outlets
Output (Watts) 750
Continuous Output Capacity (Watts) 750
Peak Output Capacity (Watts) 1500
Output Voltage Regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
2 / 4
Loading...
+ 2 hidden pages