Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection Includes 7A output breaker for AC output loads
Outlet quantity / type 1 AC outlet
INPUT
Recommended
Electrical Service
Maximum input amps /
watts
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8.4 amps at 120VAC with full inverter and charger
load (1.4A max charger-only)
Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
Input cord length (ft.) DC INPUT: User supplies cabling. 6 gauge or larger (see manual). AC INPUT: attached 6 ft. AC line cord with plug
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet, gel or SLA type batteries
DC system voltage 12V
Battery recharge rate 6A max, steps down to float level to maintain
LEDS ALARMS & SWITCHES
Switches 3 position DC off, auto (inverter or AC) and charge-only switch enables simple operation
Front panel LEDs 6 diagnostic LEDs indicate battery voltage level (high, medium & low) and operation (line, inverter, load)
SURGE / NOISE SUPPRESSION
AC suppression joule
rating
300 joules
PHYSICAL
Shipping weight (lbs) 5.5
Shipping weight (kg) 2.5
Cooling method Multi-speed fan
Shipping Dimensions
(HWD/in)
8.5 x 14.5 x 8.5
Shipping Dimensions
(HWD/cm)
21.59 x 36.83 x 21.59
Unit weight (lbs) 4
Unit weight (kg) 1.8
Material of construction Extruded aluminum
Style Heavy-duty with built-in battery charger
Form factors supported Integrated mounting feet for easy installation
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from line
power to battery mode
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer
time compatibility of loads for UPS applications)