Tripp Lite APS512 User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: APS512

PowerVerter APS Inverter/Charger - Reliable Power Source for Uninterruptible Emergency Backup Applications

Highlights

12V DC input; 120V AC output; 2 outlets

500 watts continuous output

1000 watts peak surge output for an extended period

Advanced battery charger

Fast load switching with less transfer time

Description

Tripp Lite's APS512 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run UPS,

a standalone power source or an automotive inverter. Supplies up to 500 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or

automotive DC source. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the

battery set is recharged via 3 stage, 18 amp charging system. In UPS mode, the APS system responds to blackouts and brownouts with an

uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries

and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large

inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of

user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel

battery types and selectable line to battery power transfer voltages.

PowerVerter APS Inverters accommodate "peak surge" demands by delivering more output power than their continuous rating. Compare the

"Continuous" and "Peak Surge" wattage ratings, and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle

equipment start up and motor cycling requirements. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds,

providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous output

for up to 1 hour.

Applications

Extended Run UPS - Configure as a UPS for long-term battery support of telecom systems, security alarms, computer systems and

various other motorized and electronic loads.

Standalone Power - Alternative power source for use in off-grid, backwoods, alternative energy and export applications where commercial

power is not continuously available.

Automotive - Connect to an automotive electrical system to run power tools, computers, electronic test equipment, home entertainment and

other AC appliances in fleet service vehicles, over-the-road trucks, campers, RVs, minivans and more.

Package Includes

APS512 Inverter/Charger

Instruction manual with warranty information

Features

Functions as an extended run UPS system, standalone power source and automotive inverter

Includes AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts

500 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads

Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used

2 outlets; 6-ft. AC power cord; DC input terminals for 12V battery connection

Converts 12 volt DC to 120 volt AC

Frequency control for operating stability

Advanced 18 amp, 3-stage battery charger and selector switch for gel or wet cell batteries

Resettable circuit breaker protects APS against system overload

Switch allows user to select between off, auto-invert and charge-only settings

6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)

Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery

backup

Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)

3.5mm port for connecting remote switch (User supplies plug, cable and switch - see manual)

Allows unlimited runtime capability by allowing the use any number of user-supplied batteries

Specifications

OUTPUT

Frequency
compatibility

60 Hz

Output watts Continuous - 500 watts, Overpower (up to 1 hour) - 750 watts, Double-Boost wattage (up to 10 seconds) - 1000 watts

Output nominal
voltage

AC OUTPUT: 120V AC nominal, DC CHARGER OUTPUT (DC): 12V DC nominal

Output voltage
regulation

LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains PWM sine
wave output voltage of 120 VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)

Output frequency
regulation

60 Hz (+/- 0.3 Hz)

Overload protection Circuit breaker

Outlet quantity / type Includes 2 AC outlets (NEMA 5-15R)

INPUT

Recommended
Electrical Service

DC INPUT: Requires 12V DC input source capable of delivering 50A for the required duration (when used at full
continuous capacity). For automotive applications, professional hardwire installation with 100A battery system fusing
is recommended. AC INPUT

Maximum input
amps / watts

DC INPUT: Full continuous load - 50A at 12VDC, No load - 2.2A at 12V DC. AC INPUT: 8 amps at 120V AC with full
inverter and charger load

Input connection type DC INPUT: Set of 2 DC input wingnut terminals. AC INPUT: NEMA 5-15P input plug

Voltage compatibility
(VAC)

120

Voltage compatibility
(VDC)

12

BATTERY

Expandable battery
runtime

Runtime is expandable with any number of user supplied wet or gel type batteries

DC system voltage
(VDC)

15

Battery Pack
Accessory (optional)

98-121 sealed lead acid battery (optional)

Battery recharge rate Includes 20 amp DC charging system

LEDS ALARMS & SWITCHES

Switches Lighted on/off power switch, plus 2 conductor 3.5 mm port for connecting remote switch - user supplies switch,

3.5mm plug and cable.