Tripp Lite A152-000-2 User Manual

Owner’s Manual

HDTV Multimedia

1111 W. 35th Street,

Chicago, IL 60609

Customer Support: [phone]

www.tripplite.com

Your A152-000-2 HDTV Multimedia Wall Plate comes preloaded with the most common

couplers for multimedia in-wall cable installation. You can customize your wall plate by

switching any of the pre-installed keystone inserts with the alternate ones supplied in

the package.

Wall Plate

Model: A152-000-2

Removing a Keystone Insert from the Wall Plate

You can remove any of the keystone inserts from the

wall plate by using a small, fl athead screwdriver. With the

wall plate laying on a fl at surface, insert the blade of the

screwdriver between the insert’s snap-in tab and the wall

plate (as shown) and press the tab down toward the insert

until the insert snaps out of the port.

Removing a Coupler from a Keystone Insert

1) Using both hands, hold the keystone insert between both

of your thumbs and forefi ngers. Make sure the tabs that

hold the coupler in place are facing upward.

2) Use your forefi ngers to gently pull each tab away from

the coupler.

Back of Faceplate

3) Using both thumbs, push the coupler upward until it can

be removed from the keystone insert.

Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.

Tripp Lite follows a policy of continuous improvement. Product specifi cations are subject to change without notice.

93-2772 200801148

200801148--A152-000-2 HDTV wall plate kit OM 93-2772.indd 1200801148--A152-000-2 HDTV wall plate kit OM 93-2772.indd 1 2/7/2008 9:53:59 AM2/7/2008 9:53:59 AM