Tripp Lite 1400VA User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMART2600RM2U

SmartPro 2U Rack/Tower Extended Run UPS - Line interactive, sine wave UPS with integrated switched PDU
and current monitoring

Highlights

2600VA / 2.6kVA high efficiency line interactive, extended-run 2U rack / tower

UPS

Maintains sine-wave 120V nominal output over an input range of 83 to 145V

Network communications supported via HID enabled USB port, DB9 serial

port, SNMP/Web card slot and EPO interface

Current monitoring and switched PDU control via 3 individually controllable

load banks

Input: NEMA 5-20P (120V 20A) / Output: 1 L5-20R, 4 NEMA 5-15/20R, 4

NEMA 5-15R (120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto

Rico & Canada only)

Description

2600VA line interactive UPS system for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed

depth of only 19 inches. High 96% line-power efficiency rating reduces energy consumption and BTU heat output. Expandable battery runtime with

optional BP48V24-2U and BP48V60RT-3U external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during

power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during

brownouts and one level of voltage cut during overvoltages to maintain regulated 120v output over an input range of 83-145V. Includes 5-20P input

plug and 5-15R, 5-15/20R and L5-20R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces

support communications via USB, DB9 serial and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test

data and utility power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software and complete cabling. Emergency

Power Off (EPO) interface. Integrated 3-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered

current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount

accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable,

hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment

insurance; extended warranty and service contracts available.

Applications

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or
tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM
workstations, concentrators, IP telephony and traditional PBX switching systems.

Package Includes

SMART2600RM2U UPS System, PowerAlert Software and cabling, 4-post rackmount installation hardware, Warranty information,
Instruction manual

Features

SmartPro line interactive UPS system is ideal for voice, data, medical and industrial networking applications
High 96% line-power efficiency rating reduces energy consumption and BTU heat output
Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during
overvoltages
Maintains continuous operation through blackouts, voltage fluctuations and surges
Corrects line voltage conditions as low as 83V and as high as 145 back to 120V nominal values
Standard internal battery set offers 12 minutes at full load and 4 minutes at full load
Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operation
Compact form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches
Ships with all mounting accessories for 4 post rackmount installation
Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
Optional 2-9USTAND accessory enables small-footprint upright tower placement
Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with
the built-in ability to shutdown any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current,
battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot
Built-in Emergency Power Off (EPO) interface with cable
Factory installed NEMA 5-20P input plug; user configurable L5-20P or L5-30P input plug-in connections supported
NEMA 5-15R, NEMA 5-15/20R and L5-20R output receptacles
Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (1 outlet
per load bank)
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
2 year manufacturer's product warranty, $250,000 ULtimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility 120 VAC

Frequency
compatibility

60 Hz

OUTPUT

Output VA 2600

Output watts 2100

Output nominal
voltage

120V AC

Output voltage
regulation

LINE MODE: Sine wave line voltage 120V (-18% / +8%), BATTERY MODE: Sine wave output 120V +/-5%

Output frequency
regulation

LINE MODE: Passes line frequency of 60Hz +/-10%, BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz

Outlet quantity / type 4 5-15R, 4 5-15/20R and 1 L5-20R

Customized load
management
receptacles

3 individually controllable outlets support load shedding and remote reboot on demand of locked network devices.
Controllable via PowerAlert software to switch off optional loads, like monitors, to increase available runtime for servers
and other critical devices

Overload protection Resettable circuit breaker

INPUT

Maximum input amps 16A with 5-20P or user installed L5-20P input plug / 24A with L5-30P user installed input plug

Input connection type 5-20P (user installed L5-20P and L5-30P input plugs supported)

Input cord length 10 ft., 10 gauge

Recommended
Electrical Service

20-30A 120V

BATTERY