USB 3.1 Gen 1 (5 Gbps) SATA SSD/HDD to USB-A
Enclosure Adapter with UASP Support
MODEL NUMBER: U457-025-AG2
Description
The U457-025-AG2 USB 3.1 Gen 1 (5 Gbps) SATA SSD/HDD to USB-A Enclosure Adapter lets you connect a
high-performance SATA solid state drive (SSD) or hard disk drive (HDD) to a computer or laptop with a USB-A
port. Not only does it support USB 3.1 Gen 1 data transfer rates up to 5 Gbps, but it reads data up to 70 percent
faster and writes up to 40 percent faster when connected to a UASP-enabled host controller.
Recommended for storing and sharing large files, such as photos, music and video files, the U457-025-AG2
accepts 2.5-inch SATA drives up to 2 TB. You can access data on an older SATA drive, or use a new SATA
drive for additional storage space. The adapter is plug-and-play, so no software, drivers or external power supply
is required, and it is backward compatible with previous USB generations. A blue LED indicates data is being
read, written or transferred. Slim aluminum case stores conveniently in a backpack or laptop bag for use
anywhere.
Features
Connects an Internal SATA Drive to Your Computer’s USB-A Port
Recommended for storing and sharing large photo, music and video files
Supports USB 3.1 Gen 1 data transfer rates up to 5 Gbps
Features UASP for performance up to 70% faster when connected to UASP-enabled host controller
Compatible with all USB-enabled operating systems
Compatible with 2.5 in. SATA Drives Up to 2 TB
Accepts SATA III, II and I SSDs and HDDs
Will support higher-capacity drives when available
Backward compatible with previous USB generations
Blue LED indicates drive data is being read, written or transferred
Highlights
Compatible with 2.5 in. SATA
SSDs and HDDs up to 2 TB
Supports USB 3.1 Gen 1 data
transfer rates up to 5 Gbps
Works up to 70% faster when
connected to UASP host
controller
Durable slim design perfectly
sized for backpack or laptop bag
Plug-and-play—no software,
drivers or external power supply
System Requirements
Computer with USB port (USB
3.1 Gen 1 port required for
maximum speed)
2.5 in. SATA SSD or HDD (9.5
mm max height)
Package Includes
U457-025-AG2 USB 3.1 Gen 1
SATA SSD/HDD to USB-A
Enclosure Adapter
USB 3.1 Gen 1 Micro-B to
USB-A cable, 2 ft.
Mini screwdriver
(2) Screws
Storage sleeve
Owner’s manual
Designed for Immediate Use
Plug and play—no software, drivers or external power supply needed
Durable slim aluminum case perfectly sized for backpack or laptop bag
Enclosed housing protects drive in applications requiring more durability
USB 3.1 Gen 1 cable included
Specifications
OVERVIEW
Drives Supported 2.5" HDD and SSD
PHYSICAL
Material of Construction Aluminum
Color Black
ENVIRONMENTAL
Operating Temperature Range 50 TO 122 F (10 TO 50 C)
Storage Temperature Range 32 TO 149 F (0 TO 65 C)
Relative Humidity 10% TO 80%
CONNECTIONS
Side A - Connector 1 MICRO-USB B (FEMALE)
Side B - Connector 1 22 PIN SATA + POWER (FEMALE)
Connector Plating Nickel
Contact Plating Nickel
FEATURES & SPECIFICATIONS
USB Specification USB 3.1 Gen 1 (up to 5 Gbps)
CERTIFICATIONS
Certifications Tested to CE, FCC, ROHS
WARRANTY
Product Warranty Period (Worldwide) 1-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies