Tripp SUINT2000XLCD Product Data Sheet

SmartOnline 230V 2kVA 1800W On-Line Double­Conversion UPS, Tower, Extended Run, Network
Card Options, LCD, USB, DB9

MODEL NUMBER: SUINT2000XLCD

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts,
brownouts, power surges and line noise. Recommended for small/medium servers, networking equipment
and telecom systems.

Highlights

●

Zero transfer time suitable for
advanced network applications

●

2% output voltage regulation in
online, double-conversion mode

●

Expandable runtime with
optional external battery packs

●

Interactive LED/LCD status
display

●

12 min. runtime at half load; 4.7
min. at full load

Package Includes

●

SUINT2000XLCD SmartOnline
230V 2kVA 1800W On-Line
Double-Conversion UPS

●

USB cable

●

RS-232 cable

●

(3) C13-to-C14 power cords

●

Owner’s manual

Description

The SUINT2000XLCD SmartOnline® 230V 2kVA 1800W On-Line Double-Conversion UPS provides
battery backup and AC power protection against blackouts, brownouts, power surges and line noise that
can damage electronics or destroy data. It converts AC input to DC power, and then converts DC to fully
regulated sine wave AC output with +/-2% voltage regulation in online, double-conversion mode.

Featuring seven C13 outlets, the SUINT2000XLCD has an internal battery that provides 12 minutes of
support at half load (900W) and 4.7 minutes at full load (1800W). Adding external battery packs, such as
BP48V24-2U (sold separately), provides extended runtime. Operating in optional economy mode reduces
heat output and cooling requirements and consumes less electricity.

An interactive front-panel LCD screen displays operating conditions and diagnostic data, such as load,
voltage and battery levels. An audible alarm signals UPS startup, power failure, low battery, overload,
UPS fault and remote shutdown conditions.

EMI/RFI line noise filtering improves your equipment’s performance, and 425-joule surge suppression
prevents equipment and data damage from harmful power surges. With Tripp Lite’s PowerAlert® software,
the SUINT2000XLCD enables safe unattended system shutdown and file saves in case of a prolonged
power failure. A built-in card slot supports TLNETCARD, WEBCARDLX, SNMPWEBCARD,
MODBUSCARD and RELAYIOCARD for network interface and remote monitoring and control.

Features

1 / 6

Protects Mission-Critical Rack-Mounted Equipment

●

Provides fully regulated sine wave AC output for small/medium servers, networking equipment and
telecom systems

●

+/-2% voltage regulation in online, double-conversion mode

●

230V output voltage

●

High 0.9 power factor offers 2000VA/1800W output capacity

●

7 C13 outlets; C14 input connection

●

Set of 3 C13/C14 jumpers included

●

425-joule surge suppression rating

Reliable Battery Backup with Expandable Runtime

●

Supports half load for 12 min. and full load for 4.7 min.

●

Zero transfer time suitable for advanced network applications

●

Expandable runtime with optional external battery packs, such as Tripp Lite’s BP48V24-2U

●

Restarts automatically after lengthy power outages

SNMP/Web Capability

●

Built-in slot for SNMP network interface and relay card for remote monitoring and control options

●

Compatible with TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD

EMI/RFI Line Noise Filtering

●

Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s
performance

Interactive LCD Screen

●

Reports detailed status information, including load, voltage and battery levels

Audible Alarm

●

Indicates startup/shutdown, power failure, low battery, overload and fault conditions

Communications Ports

●

USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert

Optional Economy Mode

●

Efficiently minimizes heat output, reduces cooling requirements and consumes less electricity

Specifications

OUTPUT

2 / 6