Tripp SU40KX Product Data Sheet

SmartOnline 40kVA Modular 3-Phase UPS System,
On-line Double-Conversion International UPS

MODEL NUMBER: SU40KX

Description

Tripp Lite's SU40KX (40kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides

100% system availability with N+1 modular architecture and 1+1 parallel capability. In N+1 configuration, the

SU40KX provides two self-contained, redundant 20kVA power modules that can be hot-swapped (load remaining

powered) if maintenance is required. In 1+1 configuration , two SU40KX models connected in parallel can

provide fail-safe redundancy (two 40kVA models supporting a 40kVA load) or increased capacity (two 40kVA

models supporting an 80kVA load). Large capacity 40,000VA/32,000W UPS continually converts incoming AC

power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly

regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types.

High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology

produce less than 3% input total harmonic distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs

by installing a generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 97%) saves money by lowering electricity

consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. Frequency is 50 or 60 Hz

(auto-selectable). The SU40KX combines internal power and battery modules in a single small-footprint tower compartment. Typical half-load/full-load runtimes

are 13 min./5.5 min. Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C,

available separately). A manual bypass breaker and an automatic bypass function ensure 100% availability of connected equipment by safely passing through

AC power if the UPS requires maintenance.

Features

N+1 configuration: If maintenance is required, two self-contained, redundant 20kVA power modules can be hot-swapped with the load remaining powered

1+1 configuration: Two SU40KX can be connected in parallel to provide either fail-safe redundancy or increased capacity

High input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce low input total harmonic distortion

(THDi)

Low THDi (less than 3%) reduces installation costs by allowing 1:1 generator sizing

Extremely efficient operation (up to 97%) saves money by reducing electricity consumption

True on-line, double-conversion UPS with IGBT technology provides pure sine wave AC output at all times

Highlights

40,000 VA (40kVA) 3-phase

tower UPS

N+1 redundant modular

architecture helps assure 100%

availability

1+1 parallel capability allows for

system redundancy or increased

capacity

Low THDi reduces installation

costs by permitting 1:1 generator

sizing

3-phase hardwire (220/380V,

230/400V or 240/415V AC,

3-phase, 4-wire + ground, wye)

input/output

IGBT technology and zero

transfer time, on-line

double-conversion operation

Runtime is expandable via

external battery cabinet options

Package Includes

SU40KX UPS System

PowerAlert Software

Instruction manual

Warranty information

1 / 5

Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

40,000VA/32,000W power capacity with 3-phase, hardwire input/output connections

Wide input voltage correction range: 173-300V/276-477V AC

Precision +/-1% output voltage regulation

Internal power and battery modules are combined in a single small-footprint tower compartment. Typical half-load/full-load runtimes are 13 min./5.5 min.

Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C, available

separately)

Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed

Dynamic battery management screen optimizes battery function to lengthen service life and allow cold restart of the UPS

Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server

Accessory slot accepts an optional internal SNMP card (Model SNMPWEBCARD) for remote shutdowns, reboots and more

Emergency Power Off button turns UPS output OFF and disables Bypass output

Built-in Emergency Power Off (EPO) dry-contact interface supports remote emergency shutdown in large facilities

Specifications

SELECTOR

Selector Type UPS SYSTEMS

General Info

Product Group UPS SYSTEMS

TAA Compliant No

OVERVIEW

UPS Family SmartOnline

UPS Type On-Line

OUTPUT

Output Volt Amp Capacity (VA) 40000

Output kVA Capacity (kVA) 40

Output Watt Capacity (Watts) 32000

Output kW Capacity (kW) 32

Power Factor 0.8

Crest Factor 3:1

Nominal Output Voltage(s)
Supported

220/380V; 230/400V; 240/415V; 3-Phase Wye

Frequency Compatibility 50 / 60 Hz

Output Voltage Regulation (Line
Mode)

+/- 1%

2 / 5