®
SMARTONLINE
3-PHASE UPS SYSTEMS
The Most Reliable and Cost-Effective Power Solutions for Your Data Center
SUPPORT
UP TO
160 KVA IN
PARALLEL
SMARTONLINE MODULAR 3-PHASE (40 – 80 KVA)
IDEAL OUTPUT POWER
PROTECTS CRITICAL SYSTEMS
MODULAR ARCHITECTURE
ELIMINATES DOWNTIME
1:1 GENERATOR SIZING
LOWERS INSTALLATION COSTS
EXTREME EFFICIENCY
LOWERS OPERATING COSTS
SMARTONLINE 3-PHASE (20 – 30 KVA)
RELIABLE OPERATION
KEEPS EQUIPMENT POWERED
COMPACT FOOTPRINT
SAVES FACILITY FLOOR SPACE
VERSATILE BATTERY SYSTEM
EXPANDS RUNTIME OPTIONS
SMARTONLINE MODULAR 3-PHASE UPS SYSTEMS
Extremely efficient protection for your most important equipment
IDEAL OUTPUT POWER
PROTECTS CRITICAL SYSTEMS
On-line, double conversion operation continuously
delivers precision-regulated, pure sine wave output,
isolating your critical systems from damaging and
disruptive power problems.
MODULAR ARCHITECTURE
ELIMINATES DOWNTIME
Internal N+1 power module redundancy, 1+1 parallel
capability and fault-tolerant bypass features keep your
critical systems highly available and productive around
the clock.
1:1 GENERATOR SIZING
LOWERS INSTALLATION COSTS
An advanced IGBT rectifier produces best-in-class
<4% THDi (input current Total Harmonic Distortion),
eliminating costly over-sizing requirements for
generators, breakers and cables.
EXTREME EFFICIENCY
LOWERS OPERATING COSTS
Efficiency up to 96% significantly lowers power and
cooling costs compared to multiple smaller units
or legacy high-capacity units.
SmartOnline Modular 3-Phase UPS Systems contain up to four intelligent,
independent 20 kVA power modules that support internal N+1 redundancy. If any
power module goes offline, the load is distributed among the remaining modules
and your equipment continues to operate without interruption. The UPS systems
also support a 1+1 parallel configuration to increase fault tolerance or double
output capacity (up to 160 kVA).
CONTENTS
SMARTONLINE
MODULAR
3-PHASE UPS
SYSTEMS
SU80K
208Y/120 VAC
80 kVA / 64 kW
SU80KTV
480Y/277 VAC
80 kVA / 64 kW
SU60K
208Y/120 VAC
60 kVA / 48 kW
SU60KTV
480Y/277 VAC
60 kVA / 48 kW
SU40K
208Y/120 VAC
40 kVA / 32 kW
IDEAL OUTPUT POWER 4
MODULAR
PARALLEL
1:1 GENERATOR
EXTREME
GREEN
MONITORING AND CONTROL
BATTERY
COMPACT
ORDERING
TECHNICAL
WARRANTIES AND SERVICES
ARCHITECTURE 4
FEATURES 4
SIZING 5
EFFICIENCY 5
POWER 5
6
CABINETS 6
FOOTPRINT 7
INFORMATION 7
SPECIFICATIONS 8
12
2
SMARTONLINE 3-PHASE UPS SYSTEMS
Reliable protection for small and mid-range installations
RELIABLE OPERATION
KEEPS EQUIPMENT POWERED
On-line operation and fault-tolerant bypass
features keep your equipment powered at all
times—even if the UPS system requires
maintenance, repair or replacement.
COMPACT FOOTPRINT
SAVES FACILITY FLOOR SPACE
The all-in-one design packs enough power for
multiple racks of equipment into a compact
footprint that saves precious floor space for
critical systems and cooling.
VERSATILE BATTERY SYSTEM
EXPANDS RUNTIME OPTIONS
A hot-swappable battery system with convenient
front-panel access allows you to customize battery
backup runtime through internal and/or external
expansion.
SmartOnline 3-Phase UPS Systems are available in standard and
extended-runtime configurations. The power module and expandable
internal battery system are combined in a single compact footprint.
Runtime can also be increased by connecting one or more external
battery cabinets.
CONTENTS
SMARTONLINE
3-PHASE
UPS SYSTEMS
SU30K3/3
208Y/120 VAC
30 kVA / 24 kW
SU30K3/3XR5
208Y/120 VAC
30 kVA / 24 kW
SU20K3/3
208Y/120 VAC
20 kVA / 16 kW
SU20K3/3XR5
208Y/120 VAC
20 kVA / 16 kW
3
RELIABLE OPERATION 9
COMPACT
VERSATILE
MONITORING AND CONTROL
ORDERING
TECHNICAL
WARRANTIES AND SERVICES
FOOTPRINT 9
BATTERY SYSTEM 9
10
INFORMATION 10
SPECIFICATIONS 11
12
tter C b n t U attery Cabinet UPS S
EL RE
SMARTONLINE MODULAR 3-PHASE UPS SYSTEMS
IDEAL OUTPUT POWER
SmartOnline Modular 3-Phase UPS Systems
isolate your critical equipment from power
problems, including surges, line noise,
harmonic distortion, electrical impulses,
frequency variations, brownouts, overvoltages
and blackouts. True on-line operation
continually transforms AC input power into
filtered DC power, then resynthesizes it into
precision-regulated AC output with a pure
sine wave. Strong overload capacity supports
up to 150% output for up to 60 seconds.
Reliable backup power with zero transfer time
to battery keeps equipment operating safely
through shorter power failures and allows
time to shut down or switch to generator
power during longer outages. Rapid
recharging restores battery charge levels in
as little as two hours.
MODULAR ARCHITECTURE
Intelligent, independent 20 kVA power
modules provide internal redundancy. When
the UPS is configured for N+1 redundancy,
convenient hot-swap power modules can
be replaced without powering down the
connected load. In the event of a power
module fault, the load is automatically
distributed among the remaining modules.
Because load redistribution happens without
interrupting critical systems, mean time to
recovery is zero—far superior to legacy UPS
systems. In addition, redundant control circuits
eliminate a single point of failure commonly
found in less reliable UPS designs.
If service or repair requires UPS shutdown,
a manual bypass breaker and automatic
bypass function maintain system availability
by passing through AC power until the UPS
system returns to service.
PARALLEL FEATURES
Increase fault tolerance or double output
capacity by connecting two SmartOnline
Modular 3-Phase UPS Systems in a 1+1
parallel configuration. If one UPS is taken
offline for maintenance, the other UPS
automatically compensates to support the
equipment load—without requiring additional
programming.*
UPS systems ship ready for parallel operation
and patented dual-DSP technology provides
optimal synchronization of power sources.
* Each UPS system must be configured to support ≤ 50% of the
total load to provide redundancy in a 1+1 parallel configuration.
INTERNAL N+1 REDUNDANCY
20 kVA
Power Module
20 kVA
Power Module
20 kVA
Power Module
20 kVA
Power Module
20 kVA
Redundancy
60 kVA
Load
External Battery Cabinet 80 kVA UPS System
In an N+1 configuration, the supported load is at least 20 kVA less than the maximum output capacity of the UPS system.
For example, an 80 kVA UPS is configured for N+1 redundancy when the connected load is 60 kVA or less.
1+1 PARALLEL REDUNDANCY
50% Support 50% Support
80 kVA
Load
External
Battery Cabinet
Two 80 kVA SmartOnline Modular 3-Phase UPS Systems can provide redundant backup power for an 80 kVA load.
80 kVA
UPS System
External
Battery Cabinet
80 kVA
UPS System
1+1 PARALLEL CAPACITY DOUBLING
100% Support 100% Support
160 kVA
Load
External
Battery Cabinet
Two 80 kVA SmartOnline Modular 3-Phase UPS Systems can provide non-redundant backup power for a 160 kVA load.
4
80 kVA
UPS System
External
Battery Cabinet
80 kVA
UPS System
1:1 GENERATOR SIZING
SmartOnline Modular 3-Phase Legacy UPS
EXTREME EFFICIENCY
SmartOnline Modular 3-Phase UPS Systems
have a generator-friendly design that
decreases installation costs. A high input
power factor and IGBT rectifier with DSP
control create less than 4% input current
Total Harmonic Distortion (THDi). Low
THDi enables cost-saving 1:1 sizing of UPS
systems to generators, allows generators
to run cooler and extends the operational
lifespan of all input components. Low THDi
also reduces sizing requirements for cables
and breakers and improves reliability by
eliminating nuisance breaker tripping and
overheated transformers.
INSTALLATION COST COMPARISON
Generators
Cabling
Breakers
Related Costs
Advanced high-utilization IGBT inverter technology and high-speed DSP control provide
superior operating efficiency at all load levels (up to 96% in economy mode). Increasing
efficiency lowers UPS system operating costs by reducing electricity consumption, heat
emissions and cooling costs. Replacing 160 kVA of legacy UPS capacity with SmartOnline
Modular 3-Phase UPS Systems can save more than $20,000 per year.
In addition, SmartOnline Modular 3-Phase UPS Systems automatically correct the widest
range of incoming voltages in their class. The wide voltage window and temperaturecompensated charging combine to significantly decrease battery wear, extending service
life and reducing replacement costs.
SmartOnline Modular 3-Phase UPS System Efficiency Chart
Cost
SmartOnline Modular 3-Phase UPS Systems reduce
installation costs up to 30% versus
legacy UPS systems.
GREEN POWER
Eco-friendly SmartOnline
Modular 3-Phase UPS
Systems save energy
and reduce your carbon
footprint. Replacing 160 kVA
of legacy UPS capacity can reduce CO2
emissions by 136 tons and save more than
200 megawatt-hours of electricity per
year—enough to power 16 typical U.S.
single-family homes.
SmartOnline Modular
3-Phase UPS Systems are
also RoHS compliant, which
means they adhere to strict
standards in the reduction
of six hazardous substances: lead,
mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB) and
polybrominated diphenyl ether (PBDE).
Tripp Lite is an industry leader in
RoHS compliance.
CUMULATIVE ENVIRONMENTAL IMPACT OVER FIVE YEARS
1956
1
2
3
4
5
Replacing 160 kVA of legacy UPS capacity with SmartOnline can save 200 megawatt-hours (enough to power 16 U.S. homes)
and reduce CO
1752
1310
1174
3911
3504
2621
2348
3931
3522
4695
emissions by 136 tons (enough to offset 2,000+ flights from New York to Washington) per year.
2
Legacy UPS Energy Usage (MWh)
SmartOnline Modular 3-Phase Energy Usage (MWh)
Legacy UPS CO2 Emissions (Tons)
SmartOnline Modular 3-Phase CO2 Emissions (Tons)
5867
5256
7823
5241
5869
7008
6552
8760
9779
5
MONITORING
AND CONTROL
Convenient communication and management
features allow you to monitor power
conditions, receive automatic alerts and
control SmartOnline 3- Phase UPS Systems with
drift-proof digital precision from any distance.
• DRY CONTACT CLOSURE INTERFACE
Connects to an Emergency Power Off (EPO)
circuit for emergency UPS system shutdown.
Also allows the UPS system to monitor
external battery cabinets and communicate
operational messages.
• RS-232 SERIAL PORT
Connects to a server for shutdown
commands and reporting through
PowerAlert software (included).
• ACCESSORY CARD SLOT
Optional network card (SNMPWEBCARD)
provides remote monitoring and
control. Optional environmental
sensor (ENVIROSENSE) monitors
temperature, humidity and more.
POWERALERT® NETWORK MANAGEMENT SYSTEM
PowerAlert allows you to manage hundreds of UPS systems
from a single workstation.
SmartOnline 3-Phase UPS Systems support remote management through
PowerAlert software or the SNMPWEBCARD accessory.
The LED/LCD control panel provides detailed UPS status information.
Real-Time Power
Status Consoles
• NETWORK POWER MANAGEMENT
Through PowerAlert software or
SNMPWEBCARD, you can manage
hundreds of UPS systems with
PowerAlert Network Management System
(included) or a third-party network
management system.
• LED/LCD CONTROL PANEL
Offers convenient push button control
and communicates operational modes,
1+1
Parallel
Interface
The rear panel includes several communication interfaces.
conditions and warnings.
BATTERY CABINETS
All SmartOnline Modular 3-Phase UPS Systems can be connected to one
or more external battery cabinets:
• Model SU40K has internal batteries and does not require an external battery
cabinet. External battery cabinets can be connected for expanded runtime.
• Other models do not have internal batteries and require an external
battery cabinet. Additional battery cabinets can be connected for
expanded runtime.
Dry Contact Closure Interface
Accessory
Card Slot
RS-232
Serial
Port
External battery cabinets are available in a variety of capacities. Models
BP480V26B and BP480V40C support temperature-compensated charging for
optimal charge levels and increased battery lifespan. They also match the
appearance and footprint of the UPS system cabinets. Larger models have
heavy-gauge steel cabinets with 10-year design life batteries.
6
BP480V40CBP480V26B
COMPACT FOOTPRINT
Each SmartOnline Modular 3-Phase UPS System packs enough power
for multiple racks of equipment into a compact footprint, saving valuable
data center floor space for critical systems and cooling. Wall-mounted
distribution and bypass panels do not require additional floor space.
ORDERING INFORMATION
MODEL OUTPUT CAPACITY NOMINAL INPUT/OUTPUT VOLTAGE BATTERY CONFIGURATION
SU40K
SU60K 60 kVA / 48 kW 208Y/120 VAC (3Ø, 4-wire + ground, wye) No internal batteries; external battery cabinet required.
SU80K 80 kVA / 64 kW 208Y/120 VAC (3Ø, 4-wire + ground, wye) No internal batteries; external battery cabinet required.
SU60KTV 60 kVA / 48 kW 480Y/277 VAC (3Ø, 4-wire + ground, wye) No internal batteries; external battery cabinet required.
SU80KTV 80 kVA / 64 kW 480Y/277 VAC (3Ø, 4-wire + ground, wye) No internal batteries; external battery cabinet required.
EXTERNAL BATTERY CABINETS
BP480V26B +/- 240 VDC external battery cabinet. Supports temperature-compensated battery charging for optimal charge levels and
BP480V40C +/- 240 VDC external battery cabinet. Supports temperature-compensated battery charging for optimal charge levels and
BP480V200 +/- 240 VDC external battery cabinet. Heavy-gauge steel cabinet with 10-year design life batteries.
BP480V300 +/- 240 VDC external battery cabinet. Heavy-gauge steel cabinet with 10-year design life batteries.
BP480V400 +/- 240 VDC external battery cabinet. Heavy-gauge steel cabinet with 10-year design life batteries.
BP480V500 +/- 240 VDC external battery cabinet. Heavy-gauge steel cabinet with 10-year design life batteries.
WALL-MOUNTED EXTERNAL MAINTENANCE BYPASS PANELS WITH KIRK-KEYED SAFETY INTERLOCK SYSTEM
SU40KMBPK Maintenance bypass panel for SU40K only. Kirk-keyed safety interlock system prevents sequence of operation errors.
SU60KMBPK Maintenance bypass panel for SU60K only. Kirk-keyed safety interlock system prevents sequence of operation errors.
40 kVA / 32 kW 208Y/120 VAC (3Ø, 4-wire + ground, wye) Internal batteries; external battery cabinet optional.
(Hardwire connection. Multiple cabinets can be connected in parallel for extended runtime. See www.tripplite.com for runtime and load data.)
increased battery lifespan. Cabinet matches appearance and footprint of UPS system cabinet.
increased battery lifespan. Cabinet matches appearance and footprint of UPS system cabinet.
SU80KMBPK Maintenance bypass panel for SU80K only. Kirk-keyed safety interlock system prevents sequence of operation errors.
SU60KMBPKX Maintenance bypass panel for SU60KTV only. Kirk-keyed safety interlock system prevents sequence of operation errors.
SU80KMBPKX Maintenance bypass panel for SU80KTV only. Kirk-keyed safety interlock system prevents sequence of operation errors.
WALL-MOUNTED PARALLEL DISTRIBUTION PANELS
SUPC2MBP40K Parallel distribution with bypass panel for 1+1 parallel connection of SU40K models only.
SUPC2MBP60K Parallel distribution with bypass panel for 1+1 parallel connection of SU60K models only.
SUPC2MBP80K Parallel distribution with bypass panel for 1+1 parallel connection of SU80K models only.
SUPC2MBP60KX Parallel distribution with bypass panel for 1+1 parallel connection of SU60KTV models only.
SUPC2MBP80KX Parallel distribution with bypass panel for 1+1 parallel connection of SU80KTV models only.
POWER MANAGEMENT ACCESSORIES
SNMPWEBCARD Adds Ethernet network interface to UPS system for remote monitoring and control via SNMP, Web or telnet.
ENVIROSENSE Monitors temperature and humidity. Monitors up to 4 additional sensors via dry contact closure interface.
Requires SNMPWEBCARD.
WARRANTIES AND SERVICES
Site survey services, start-up services, preventive maintenance services, extended warranties and on-site warranties are available.
Visit www.tripplite.com or contact your Tripp Lite sales representative for more information.
(Required for 1+1 parallel connection of UPS systems.)
7
TECHNICAL SPECIFICATIONS
MODEL SU40K SU60K SU80K SU60KTV SU80KTV
NOMINAL VOLTAGE 208Y/120 VAC
VOLTAGE RANGE 163Y/94V to 260Y/150V
113Y/65V to 260Y/150V
CURRENT THDi (Full Load) < 4%
INPUT
POWER FACTOR
(On-line, Full Load) > 0.99
(3Ø, 4-wire + ground, wye) 480Y/277 VAC (3Ø, 4-wire + ground, wye)
378Y/218V to 603Y/348V
(Full Load) (-22%/+25%)
(Full Load) (-22% to +25%)
262Y/151V to 603Y/348V
(≤ 70% Load) (-46%/+25%)
(≤ 70% Load) (-45%/+25%)
FREQUENCY (Auto-Selectable) 50/60 Hz
FREQUENCY TOLERANCE ± 5%
NOMINAL CURRENT 97 A
(112 A max.
with charger)
145 A
(168 A max.
with charger)
193 A
(225 A max.
with charger)
63 A
(73 A max.
with charger)
(97 A max.
with charger)
CAPACITY (kVA/kW) 40 kVA/32 kW 60 kVA/48 kW 80 kVA/64 kW 60 kVA/48 kW 80 kVA/64 kW
POWER FACTOR 0.8 Per Phase
NOMINAL VOLTAGE 208Y/120 VAC 480Y/277 VAC
FREQUENCY 50/60 Hz ± 0.05 Hz
NOMINAL CURRENT 111 A 167 A 222 A 72 A 96 A
WAVEFORM
OUTPUT
(On-line or Battery) Pure Sine Wave
VOLTAGE THD (Linear Load) ≤ 3%
VOLTAGE REGULATION (Static) ± 1%
VOLTAGE REGULATION (Dynamic) Maximum 7% Deviation
OVERLOAD CAPACITY ≤ 125% for 10 minutes; ≤ 150% for 60 seconds; > 150% for 1 second
RECTIFIER (3-Pole, 600 VAC) 75 A 125 A 150 A 125 A 150 A
BYPASS (3-Pole, 600 VAC) 150 A 225 A 300 A 100 A 125 A
RESERVE (3-Pole, 600 VAC) 150 A 225 A 300 A 100 A 125 A
OUTPUT (3-Pole, 600 VAC) 150 A 225 A 300 A 100 A 125 A
BATTERY (Negative Pole, 600 VDC) 100 A 150 A 150 A 100 A 150 A
BREAKERS
RECOMMENDED MINIMUM
150 A 225 A 300 A 100 A 125 A
OCPD RATING
STANDARD INTERFACE LED/LCD Control Panel with Event Log, RS-232, Dry Contact Closure, EPO (Local and Remote)
OPTIONAL INTERFACE SNMPWEBCARD, ENVIROSENSE
UPS TOPOLOGY On-line, Double Conversion
AGENCY APPROVALS UL 1778, CSA, FCC Class A, NOM, RoHS
EFFICIENCY Up to 96%
TRANSFER TIME (On-line Mode) 0 ms
AMBIENT OPERATING TEMPERATURE 32° F to 104° F (0° C to 40° C)
ELEVATION 0 to 10,000 ft (0 to 3,000 m)
HUMIDITY (Non-Condensing) ≤ 90%
(@ 1 m) < 65 dBA
NOISE
GENERAL
TYPICAL RUNTIME
*
(Half/Full Load)
13/5.5+ min
(Internal Batteries)
14/5.5+ min
(BP480V26B)
17/6.7+ min
(BP480V40C)
14/5.5+ min
(BP480V26B)
17/6.7+ min
(BP480V40C)
Height 66.9 in (1,699 mm) 66.9 in (1,699 mm) 66.9 in (1,699 mm) 66.9 in (1,699 mm) 66.9 in (1,699 mm)
DIMENSIONS
(Power Module)
Width 20.5 in (521 mm) 20.5 in (521 mm) 20.5 in (521 mm) 20.5 in (521 mm) 20.5 in (521 mm)
Depth 33.7 in (856 mm) 37.7 in (958 mm) 38.8 in (986 mm) 33.7 in (856 mm) 33.7 in (856 mm)
UNIT WEIGHT** (Power Module) 1,513 lb (688 kg) 1,178 lb (535 kg) 1,444 lb (656 kg) 995 lb (452 kg) 1,105 lb (502 kg)
SHIPPING WEIGHT** (Power Module) 1,690 lb (768 kg) 1,356 lb (616 kg) 1,643 lb (747 kg) 1,175 lb (534 kg) 1,286 lb (585 kg)
84 A
*
Runtime varies with load, battery condition and other factors. Runtime can be extended by adding additional external battery cabinets, sold separately.
**
The weight of model SU40K includes internal batteries.
8
SMARTONLINE 3-PHASE UPS SYSTEMS
RELIABLE OPERATION
SmartOnline 3-Phase UPS Systems protect your equipment from
power problems, including surges, line noise, harmonic distortion,
electrical impulses, frequency variations, brownouts, overvoltages
and blackouts. On-line operation continually transforms AC
input power into filtered DC power, then resynthesizes it into
precision-regulated AC output with a pure sine wave. Reliable
backup power with zero transfer time to battery keeps equipment
operating safely through shorter power failures and allows time to
shut down or switch to generator power during longer outages.
Fault-tolerant bypass features keep your equipment powered at
all times—even if the UPS system requires maintenance, repair
or replacement.
COMPACT FOOTPRINT
SmartOnline 3-Phase UPS Systems have an all-in-one form factor
that combines the power module and battery system. They pack
enough power for multiple racks of equipment into a compact
footprint that saves valuable data center floor space for critical
systems and cooling. Wall-mounted distribution and bypass
panels do not require additional floor space.
VERSATILE BATTERY SYSTEM
All SmartOnline 3-Phase UPS Systems scale to fit your runtime
requirements through an expandable, hot-swappable battery
system with convenient front-panel access:
• Model SU20K3/3 includes 2 internal battery packs and has
room to add 2 additional battery packs.
• Model SU30K3/3 includes 3 internal battery packs and has
room to add 1 additional battery pack.
• Extended-runtime models (SU20K3/3XR5 and SU30K3/3XR5)
each include 5 internal battery packs and have room to add
3 additional battery packs.
• All models can also be connected to one or more compact
external battery cabinets (SUBF2030). Each external battery
cabinet holds up to 4 battery packs, sold separately.
• Larger-capacity external battery cabinets with 10-year design
life batteries are also available.
*
Battery pack model SURBC2030.
*
*
*
*
OPEN OPEN
+_+
OPEN OPEN
+
+_+
+_+
SU20K3/3XR5 SU30K3/3XR5
OPEN OPEN
OPEN OPEN
External Battery Cabinet
_
SU20K3/3 SU30K3/3
_
OPEN
_
_
SUBF2030
+
+
OPEN OPEN
+
+_+
+_+
Internal Battery Pack
_
OPEN
_
+
_
OPEN
SURBC2030
_
_
_
SmartOnline 3-Phase UPS Systems combine the power module
and battery system in a single compact footprint.
You can increase battery backup runtime by installing
additional internal battery packs and/or external battery
cabinets. External battery cabinets support parallel connection.
9
MONITORING AND CONTROL
Convenient communication and management features allow
you to monitor power conditions, receive automatic alerts and
control SmartOnline 3-Phase UPS Systems from any distance.
• COMMUNICATION PORTS
RS-232, AS/400 and dry contact closure ports connect
to servers for shutdown commands and reporting through
PowerAlert software (included). An Emergency Power Off
(EPO) jack connects to your facility’s EPO circuit for
emergency UPS system shutdown.
POWERALERT NETWORK MANAGEMENT SYSTEM
• ACCESSORY CARD SLOT
Optional network card (SNMPWEBCARD) provides remote
PowerAlert allows you to manage
hundreds of UPS systems from a
single workstation.
monitoring and control. Optional dry contact closure
accessory card (RELAYIOCARD) provides 6 outputs and
1 input.
SmartOnline 3-Phase UPS Systems support remote management through
PowerAlert software or the SNMPWEBCARD accessory.
• NETWORK POWER MANAGEMENT
Through PowerAlert software or SNMPWEBCARD, you
can manage hundreds of UPS systems with PowerAlert
Network Management System (included) or a third-party
network management system.
• LED/LCD CONTROL PANEL
Offers convenient push button control and communicates
operational modes, conditions and warnings.
The LCD/LED control panel indicates more than 45 separate
faults, warnings and operational conditions.
ORDERING INFORMATION
MODEL OUTPUT CAPACITY BATTERY CONFIGURATION
SU20K3/3
SU20K3/3XR5
SU30K3/3
SU30K3/3XR5
BATTERY EXPANSION
SURBC2030 240 VDC internal battery pack for SmartOnline 3-Phase UPS Systems and SUBF2030 external battery cabinets.
SUBF2030 External battery cabinet. Requires SURBC2030 battery packs (up to 4 per cabinet), sold separately.
BP240V350 240 VDC external battery cabinet with 10-year design life batteries.
BP240V400 240 VDC external battery cabinet with 10-year design life batteries.
BP240V400C 240 VDC external battery cabinet with 10-year design life batteries. Built-in battery charger.
BP240V500 240 VDC external battery cabinet with 10-year design life batteries.
BP240V500C 240 VDC external battery cabinet with 10-year design life batteries. Built-in battery charger.
WALL-MOUNTED EXTERNAL MAINTENANCE BYPASS PANEL WITH MECHANICAL INTERLOCK SYSTEM
SU2030KMBP Maintenance bypass panel for 20 kVA and 30 kVA models. Mechanical interlock system prevents sequence
POWER MANAGEMENT ACCESSORIES
SNMPWEBCARD Adds Ethernet network interface to UPS system for remote monitoring and control via SNMP, Web or telnet.
ENVIROSENSE Monitors temperature and humidity. Monitors up to 4 additional sensors via dry contact closure interface.
RELAYIOCARD Programmable dry contact closure accessory card with 6 output contacts and 1 input contact.
WARRANTIES AND SERVICES
Site survey services, start-up services, preventive maintenance services, extended warranties and on-site warranties are available.
Visit www.tripplite.com or contact your Tripp Lite sales representative for more information.
20 kVA / 16 kW Includes 2 internal battery packs; room for 2 additional SURBC2030 battery packs.
20 kVA / 16 kW Includes 5 internal battery packs; room for 3 additional SURBC2030 battery packs.
30 kVA / 24 kW Includes 3 internal battery packs; room for 1 additional SURBC2030 battery pack.
30 kVA / 24 kW Includes 5 internal battery packs; room for 3 additional SURBC2030 battery packs.
(Multiple battery cabinets can be connected in parallel. See www.tripplite.com for runtime and load data.)
of operation errors.
Requires SNMPWEBCARD.
Real-Time Power
Status Consoles
10
TECHNICAL SPECIFICATIONS
MODEL SU20K3/3 SU20K3/3XR5 SU30K3/3 SU30K3/3XR5
NOMINAL VOLTAGE 208Y/120 VAC
(3Ø, 4-wire + ground, wye)
VOLTAGE RANGE 166Y/96V to 250Y/144V (Full Load) (-20%/+20%)
FREQUENCY
INPUT
POWER FACTOR
(Auto-Selectable) 50/60 Hz ± 3 Hz
(On-line, Full Load) > 0.95
NOMINAL CURRENT 60 A 90 A
CAPACITY (kVA/kW) 20 kVA/16 kW 30 kVA/24 kW
POWER FACTOR 0.8 Per Phase
NOMINAL VOLTAGE 208Y/120 VAC
FREQUENCY 50/60 Hz ± 0.1 Hz
NOMINAL CURRENT 56 A 83 A
OUTPUT
WAVEFORM (On-line or Battery) Pure Sine Wave
THD (Linear Load) ≤ 3%
VOLTAGE REGULATION (Static) ± 2%
OVERLOAD CAPACITY ≤ 125% for 60 seconds; ≤ 150% for 30 seconds; > 150% for 2 seconds
MAIN INPUT PROTECTION 200 A / 150 VAC Fuse x 3
STANDARD INTERFACE LED/LCD Control Panel, RS-232, AS/400, Dry Contact Closure, EPO (Local and Remote)
OPTIONAL INTERFACE SNMPWEBCARD, ENVIROSENSE, RELAYIOCARD
UPS TOPOLOGY On-line, Double Conversion
AGENCY APPROVALS UL 1778, CSA, FCC Class A, NOM
EFFICIENCY Up to 93%
TYPICAL RUNTIME* (Half/Full Load) 13/5+ min
(Internal Batteries)
42/17+ min
(Internal Batteries)
13/5+ min
(Internal Batteries)
25/11+ min
(Internal Batteries)
INCLUDED INTERNAL BATTERY PACKS 2 5 3 5
INTERNAL BATTERY PACK CAPACITY
**
4
(Can Add 2)
8
(Can Add 3)
4
(Can Add 1)
TRANSFER TIME 0 ms
GENERAL
AMBIENT OPERATING TEMPERATURE 32° F to 104° F (0° C to 40° C)
ELEVATION 0 to 10,000 ft (0 to 3,000 m)
HUMIDITY (Non-Condensing) ≤ 95%
NOISE (@ 1 m) < 65 dBA
UNIT HEIGHT 35.9 in (912 mm) 50.9 in (1,293 mm) 35.9 in (912 mm) 50.9 in (1,293 mm)
UNIT WIDTH 19.5 in (495 mm) 19.5 in (495 mm) 19.5 in (495 mm) 19.5 in (495 mm)
UNIT DEPTH 36.8 in (935 mm) 36.8 in (935 mm) 36.8 in (935 mm) 36.8 in (935 mm)
8
(Can Add 3)
UNIT WEIGHT (Standard Configuration) 519 lb (236 kg) 979 lb (444 kg) 660 lb (299 kg) 999 lb (453 kg)
SHIPPING WEIGHT (Standard Configuration) 607 lb (275 kg) 1,133 lb (514 kg) 748 lb (339 kg) 1,153 lb (523 kg)
*
Runtime shown for standard internal battery configuration. Runtime varies with load, battery condition and other factors. Runtime can be extended by adding
internal battery packs and/or external battery cabinets, sold separately.
**
Add internal battery pack model SURBC2030, sold separately.
11
WARRANTIES AND SERVICES
ABOUT TRIPP LITE
Since 1922, Tripp Lite has established a global reputation for
quality by providing customers with reliable, cost-effective
products and responsive service. After introducing the first
desktop UPS system and the popular Isobar
the early eighties, Tripp Lite became the gold standard for power
protection in the growing information technology sector. More
than 9 million UPS systems and 20 million Isobars later, loyal
customers worldwide choose Tripp Lite to power, protect and
connect equipment ranging from home electronics to servers
and network equipment in enterprise data centers.
®
surge suppressor in
SmartOnline 3-Phase UPS Systems include a 1-year limited
warranty backed by Tripp Lite’s experienced service and
support team. Tripp Lite also offers a variety of on-site
warranties, extended warranties, start-up services and
service contracts for UPS systems and battery cabinets.
Tripp Lite’s expert service technicians can assist in every
phase of your implementation, from site planning and
start-up to preventive maintenance and rapid repair. Contact
Tripp Lite for more information.
Tripp Lite manufactures more than 2,500 products, including
UPS systems, replacement batteries, PDUs, power management
tools, rack systems, surge suppressors, KVM switches, cables,
power strips, inverters, inverter/chargers, line conditioners and
specialty products for healthcare and audio/video applications.
Tripp Lite’s heritage of invention is reflected today in practical
innovations that address customer needs without ignoring fiscal
realities:
• SmartOnline Hot-Swappable UPS Systems keep critical
servers, storage and network equipment running 24x7,
even during UPS maintenance, repair or replacement.
• SmartPro® CRM UPS Systems deliver best-in-class
wattage and battery capacity in shallow-depth cabinets
optimized for network/telecom wiring closets.
• Green power solutions save money and protect
the environment. Economy mode operation and
high-efficiency UPS designs conserve energy
while cutting electricity bills and carbon
emissions. Eco-friendly manufacturing across
every product line enables industry-leading
RoHS (Restriction of Hazardous Substances)
compliance for a cleaner, greener planet.
Distributed By:
TRIPP LITE WORLD HEADQUARTERS
1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1234 • www.tripplite.com
Copyright © 2014 Tripp Lite. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from actual products.
14-07-227 95-33E5
Loading...