Tripp SMX750SLT Product Data Sheet

SmartPro .75kVA Line Interactive Sine Wave UPS,
SNMPWEBCARD option, Tower, USB, Serial,
220/230/240V

MODEL NUMBER: SMX750SLT

Description

Tripp Lite's SMX750SLT intelligent, line-interactive sine wave UPS system protects servers, networking

accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 15 minutes half load

runtime and 5 minutes full load runtime. 750VA/500 watt power handling capability and full-time sine wave output offers guaranteed compatibility with

networking, telecom and other sensitive electronic applications. Includes 6 protected C13 output receptacles total. Network management interfaces support

communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels,

self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Single line Tel/DSL and network Ethernet line surge

suppression. Built-in audible alarm and 9 LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost and trim

operational status information. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient

surges. Attractive, all-black tower housing.

Features

SMX750SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and

overvoltages, plus network-grade AC surge suppression

750VA/500 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive

electronic devices

Large internal batteries offer runtimes of 15 minutes at half load (325VA/250 watts) and 5 minutes at full load (750VA/500 watts)

Automatic Voltage Regulation (AVR) circuits maintain user-selectable 220, 230 or 240V nominal output over an input voltage range of 151 to 290

Includes 6 C13 output receptacles

IEC320-C14 input connection accepts a variety of detachable cordsets

Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software

Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)

Highlights

750VA line interactive tower

UPS; Sine wave output

220/230/240V nominal output

during brownouts and

overvoltages

USB, RS232 and optional

SNMP/Web card are available

for simultaneous use

Front panel status LEDs with

load level and battery capacity

display

C14 input; 6 C13 outlets;

Includes 2 C13 to C14 cables

Package Includes

SMX750SLT UPS System

PowerAlert Software CD-ROM

USB and serial cabling

User manual with warranty

information

1 / 5

9 LEDs offer continuous status information of UPS operating parameters and site power quality

Hot-swappable batteries allow on-site battery replacement without powering off connected equipment

Single line Tel/DSL and network Ethernet line surge suppression

Specifications

SELECTOR

Selector Type UPS SYSTEMS

General Info

Product Group UPS SYSTEMS

TAA Compliant No

OVERVIEW

UPS Family SmartPro Network

UPS Type Line-Interactive

OUTPUT

Output Volt Amp Capacity (VA) 750

Output Watt Capacity (Watts) 500

Power Factor 0.7

Nominal Output Voltage(s)
Supported

220V; 230V; 240V

Nominal Voltage Details 230V default (voltage selection via back panel switches)

Frequency Compatibility 50 / 60 Hz

Output Voltage Regulation (Line
Mode)

-11%, +6%

Output Voltage Regulation (Battery
Mode)

+/- 5%

Output Receptacles (6) C13

Included Output Power Cables Includes 2 C13 to C14 output power cables

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 3.6A (220V), 3.5A (230V), 3.4A (240V)

Nominal Input Voltage(s) Supported 220V AC; 230V AC; 240V AC

UPS Input Connection Type C14 inlet

2 / 5