Tripp SMX700HG Product Data Sheet

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMX700HG

SmartPro Medical Grade .7kVA 230V Line interactive Tower UPS, full isolation, USB & Serial ports

Highlights

700VA line interactive tower UPS

Professional features include serial port, USB port, IEC320 plug & outlets,

built-in isolation transformer

Input: IEC320 C14 (230V 3.6A) / Output: 6 IEC320 C13 (230V)

Description

Tripp Lite's SMX700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and unattended
shutdown capability. Tested to CE/IEC 60601-1 as medical electrical equipment. Built-in isolation transformer with Faraday shield removes common
mode noise while maintaining full AC surge suppression in all modes. Resistant to electrostatic discharge. Includes high quality hospital-grade plug
and outlets. 700VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power
failures. Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274 back to normal 230V levels, saving
battery reserves for use only during complete power failures. Includes 6 outlets, diagnostic LEDs and built-in USB & RS-232 communications ports
that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Applications

Tested to CE/IEC 60601-1. UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless

communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support

applications.

Package Includes

SMX700HG Medical Grade UPS System

One USB and One DB9 monitoring cable

Warranty information

Instruction manual

Features

Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required

Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge

suppression in all modes

Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without

using battery power

Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections

Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment

Resistant to electrostatic discharge

Supports loads up to 700VA/450 watts

36 minutes half load runtime (with 350VA load), 14.5 minutes full load runtime (with 700VA load)

6 protected hospital-grade outlets; IEC C14 inlet on 6-inch dongle

RS-232 and USB monitoring ports for remote monitoring and unattended shutdown

PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)

Complete surge protection, line isolation and EMI/RFI noise filtering

5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace

Battery replacement door

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

700

Output Watt Capacity
(watts)

450

Nominal Output
Voltage(s) Supported

220V; 230V; 240V

Nominal Voltage
details

230v nominal inverter output voltage

Frequency
compatibility

50 / 60 Hz

Frequency
compatibility details

Automatic frequency selection

Output voltage
regulation (line mode)

-18%, +8%

Built-in UPS output
receptacles

6 C13 outlet(s)

INPUT

Rated input current (at
maximum load)

3.6A

Nominal Input
Voltage(s) Supported

230V AC

UPS input connection
type

C14 inlet

UPS Input cord length
(ft.)

6 inch dongle., 16 gauge

UPS Input cord length
(m)

1.83

Recommended
Electrical Service

10A 230V

Voltage compatibility
(VAC)

230

Phase Single-Phase

BATTERY

Full load runtime
(minutes)

14.5 min. (450w)

Half load runtime
(minutes)

36 min. (225w)

DC system voltage
(VDC)

36

Battery recharge rate
(included batteries)

Less than 3.6 hours from 10% to 90%