Tripp SMX2200XLRT2U Product Data Sheet

SmartPro 230V 2.2kVA 1.92kW Line-Interactive Sine
Wave UPS, 2U, Extended Run, Network Card
Options, LCD, USB, DB9

MODEL NUMBER: SMX2200XLRT2U

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for

critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply(UPS)

with built-in Auto-Voltage Regulation(AVR) actively corrects brownouts and overvoltages back to usable levels

while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in

exceptionally poor-power environments with two separate levels of voltage boost to correct both slight

undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed

UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover

from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency

offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional network

management card options, such as Tripp Lite's SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels,

self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and

real-time remote reboot and load shedding of select outlets. Emergency Power Off(EPO) interface. LCD display panel easily rotates for viewing in rackmount

or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.

Field-replaceable, hot-swappable battery modules.

Features

Line interactive UPS with Automatic Voltage Regulation(AVR) corrects brownouts and overvoltages from 158 to 278V

C20 AC power inlet; 8 C13 output receptacles, Two independently switchable output load banks

Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages

High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emissions

Internal batteries offer 11.9 minutes at 50% load(960W) and 5 minutes at 100% load(1920W)

Extended runtime is available with optional BP48V24-2U(limit 1), BP48V60RT3U(no limit) or BP48V27-2US(no limit) external battery packs(max output is

reduced to 1600w with external battery packs connected)

Highlights

2.2kVA / 2200VA / 1920W line

interactive 2U rack/tower UPS,

Sine Wave

230V output, Corrects brownouts

and overvoltages from 158V to

278V

0.9 Power Factor, Interactive

LCD interface

Extended runtime options up to

1600W

4 post compatible mounting

accessories

98% line-mode efficiency, 2

switched load banks

USB, RS232, EPO and slot for

Network Management Card

options

230V C20 inlet, 8 C13 outlets

Package Includes

SMX2200XLRT2U UPS system

PowerAlert Software with USB,

Serial & EPO cabling

4 post rackmount installation kit

Set of 3 C13/C14 power cables

Instruction manual

1 / 5

External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment

Intelligent battery management system extends battery life

Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens

of detailed UPS and site power information

LCD interface also supports a number of advanced user setup and operating preferences

Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND

enables tower placement

Built-in USB, RS-232 and optional network management card options, such as Tripp Lite's SNMPWEBCARD network interface

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable

Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 2200

Output kVA Capacity (kVA) 2.2

Output Watt Capacity (Watts) 1920

Output kW Capacity (kW) 1.92

Power Factor 0.87

Nominal Output Voltage(s)
Supported

220V; 230V; 240V

Nominal Voltage Details 230V nominal output in battery mode

Frequency Compatibility 50 / 60 Hz

Frequency Compatibility Details Automatic frequency selection

Output Voltage Regulation (Line
Mode)

-15%, +6%

Output Voltage Regulation (Battery
Mode)

+/- 5%

Output Receptacles (8) C13

Included Output Power Cables Includes 3 C13 to C14 output power cables

Load Management Receptacles Two switchable single-outlet C13 load banks

Hot-Swap PDU options PDUBHV20 (2U / 6 C13, 2 C19 outlets)

Output AC Waveform (AC Mode) Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 10.7A

2 / 5

Nominal Input Voltage(s) Supported 230V AC

UPS Input Connection Type C20 inlet

UPS Input Connection Description

IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles

Input Circuit Breakers 15A

Input Phase Single-Phase

BATTERY

Full Load Runtime (min.) 5 min. (1920w)

Half Load Runtime (min.) 11.9 min. (960w)

Expandable Battery Runtime Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP48V24-2U

(limit 1);

BP48V60RT-3U

(multi-pack compatible);

BP48V27-2US

(multi-pack compatible)

DC System Voltage (VDC) 48

Battery Recharge Rate (Included
Batteries)

Less than 4.5 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery
Cartridge

RBC94-2U

Battery Access Front panel battery access door

Battery Replacement Description Hot-swappable, user replaceable batteries

Expandable Runtime Yes

VOLTAGE REGULATION

Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278

Overvoltage Correction Voltage reduction of 12% applies when input is between 244-278V

Undervoltage Correction Voltage boost of 12% applies when input voltage is between 183-206V

Severe Undervoltage Correction Voltage boost of 24% applies when input voltage is between 158-182V

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display

Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual
for detailed LCD configuration and monitoring options)

Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions

Alarm Cancel Operation

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available

Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

SURGE / NOISE SUPPRESSION

UPS AC Suppression Joule Rating 350

UPS AC Suppression Response
Time

Instantaneous

3 / 5

EMI / RFI AC Noise Suppression Yes

PHYSICAL

Included Mounting Accessory
Description

4 post rackmount installation accessories included

Installation Form Factors Supported
with Optional Accessories

2 post rackmount(

2POSTRMKITWM

); Wallmount(

2POSTRMKITWM

); Tower(

2-9USTAND

)

Primary Form Factor Rackmount

UPS Power Module Dimensions
(hwd, in.)

3.5 x 17.5 x 19.5

UPS Power Module Dimensions
(hwd, cm)

8.9 x 44.4 x 49.5

Rack Height (U Spaces) 2

Minimum Required Rack Depth
(inches)

26.5

Minimum Required Rack Depth (cm) 67.3

UPS Power Module Weight (lbs.) 68.75

UPS Power Module Weight (kg) 31.2

UPS Shipping Dimensions (hwd / in.) 9.25 x 24.75 x 22.5

UPS Shipping Dimensions (hwd /
cm)

23.5 x 62.9 x 57.2

Shipping Weight (lbs.) 82.3

Shipping Weight (kg) 37.3

Cooling Method Fan

UPS Housing Material Steel

ENVIRONMENTAL

Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load) 161

AC Mode Efficiency Rating (100%
Load)

98%

COMMUNICATIONS

Communications Interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions

PowerAlert Software Included

Communications Cable USB, DB9 and EPO cabling included

4 / 5

WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer Time 6 ms. (AC to DC) / 1 ms. (DC to AC)

Low Voltage Transfer to Battery
Power (Setpoint)

158V

High Voltage Transfer to Battery
Power (Setpoint)

278V

SPECIAL FEATURES

Grounding Lug Back panel grounding lug

Cold Start (Startup in Battery Mode
During a Power Failure)

Cold-start operation supported

High Availability UPS Features Hot swappable batteries

Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

CERTIFICATIONS

UPS Certifications CE

UPS Certification Details IEC 62040-1, IEC 62040-2 Class A EMI, GOST

WARRANTY

Product Warranty Period
(International)

2-year limited warranty

Product Warranty Period (Mexico) 2-year limited warranty

Product Warranty Period (Puerto
Rico)

2-year limited warranty

© 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does

not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:

http://www.tripplite.com/products/product-certification-agencies

5 / 5