Tripp SMX1200XLHG Product Data Sheet

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMX1200XLHG

SmartPro Medical Grade 1kVA 230V Line interactive Tower UPS, Extended-run, full isolation, USB and Serial
ports

Highlights

1000VA / 1kVA line interactive, extended run tower UPS

Maintains 230V nominal output over an input range of 155 to 274V

Professional features include serial port, IEC320 plug & outlets, built-in

isolation transformer

Input: IEC C14 inlet (230V 5A) / Output: 6 IEC C13 (230V)

Description

Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime and

intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation

transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.

Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers,

inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to

several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack

compatible). Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V back to normal 230V levels,

saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9)

that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Applications

CE/IEC 60601-1 compliant UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless

communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support

applications

Package Includes

SMX1200XLHG Medical Grade Tower UPS System

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required

Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge

suppression in all modes

Provides connected equipment with continuous power during short and long duration loss of commercial power

Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack

compatible)

Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without

using battery power

Full line isolation prevents shock potential and operational problems in sensitive electronic equipment

Resistant to electrostatic discharge

Supports loads up to 1000VA/750W

27.5 min. half-load runtime (500VA/375W), 11 min. full load runtime (1000VA/750W)

6 protected outlets; 6-inch dongle with IEC C14 inlet

USB and DB9 communication ports

PowerAlert unattended shutdown software and complete cabling included

Complete surge protection, line isolation and EMI/RFI noise filtering

5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace

Battery replacement door and back panel grounding lug

Specifications

OUTPUT

Output Volt Amp
Capacity (VA)

1000

Output Watt Capacity
(watts)

750

Nominal Output
Voltage(s) Supported

220V; 230V; 240V

Nominal Voltage
details

230v nominal inverter output voltage

Frequency
compatibility

50/60 Hz (auto-selectable)

Output voltage
regulation (line mode)

-18%, +8%

Built-in UPS output
receptacles

6 C13 outlet(s)

INPUT

Rated input current (at
maximum load)

5A

Nominal Input
Voltage(s) Supported

230V AC

UPS input connection
type

C14 inlet

UPS Input cord length
(ft.)

6 inch dongle, 16 gauge

UPS Input cord length
(m)

1.83

Recommended
Electrical Service

10A 230V

Voltage compatibility
(VAC)

230

BATTERY

Full load runtime
(minutes)

11 min. (750w)

Half load runtime
(minutes)

27.5 min. (375w)

Expandable battery
runtime

Supports extended runtime with optional BP36V15-2U (limit 1) and BP36V42-3U external battery pack (multi-pack
compatible)

External battery pack
compatibility

BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible)

DC system voltage
(VDC)

36

Battery recharge rate
(included batteries)

Less than 4.5 hours from 10% to 90%

Replacement battery
cartridge (internal
UPS battery
replacement)

RBC53

Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off

Typical battery
lifespan

3-6 years, depending on usage

VOLTAGE REGULATION

Voltage regulation
description

Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to
maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to
274V AC.

Overvoltage correction Input voltages between 245 and 274V AC are reduced by 9%

Undervoltage
correction

Input voltages between 183 and 199 are boosted by 10%

Severe undervoltage
correction

Input voltages between 156 and 182 are boosted by 21%

Direct pass through Input voltages between 200 and 244V AC are passed through unchanged

LEDS ALARMS & SWITCHES

LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous

short beeps) and low battery (continuous tone)

Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION

UPS AC suppression
joule rating

340 joules

EMI / RFI AC noise
suppression

Yes

AC suppression
response time

Instantaneous

PHYSICAL

Installation form
factors supported with
included accessories

Tower

Installation form
factors supported with
optional accessories

Wallmount (UPSWM - tower mounting kit)

UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)

12.7 x 7.5 x 9.1

UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)

32.3 x 19 x 23.1

UPS / Power Module
weight (lbs)

45.5

UPS / Power Module
weight (kg)

20.7

UPS Shipping
dimensions (height x
width x depth / inches)

18.5 x 12.2 x 13.4

UPS Shipping
dimensions (height x
width x depth / cm)

47 x 31 x 34

Shipping weight (lbs) 48.8

Shipping weight (kg) 22

Cooling method UPS cooling via rear-exit fan

UPS housing material PVC

ENVIRONMENTAL

Operating
Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature
Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr.
(full load)

252.2

Battery mode BTU /
hr. (full load)

252.2

COMMUNICATIONS

Communications
interface

USB; DB9 Serial

Software and cabling
included

PowerAlert UPS monitoring software is included on CD-ROM for all common network and standalone operating
systems. Ships with 2 cables, 1-USB to USB & 1-DB9 to DB9

LINE / BATTERY TRANSFER

Transfer time 2-4 milliseconds

Low voltage transfer
to battery power
(setpoint)

155

High voltage transfer
to battery power
(setpoint)

274

SPECIAL FEATURES

Grounding lug Back panel grounding lug

Cold Start (startup in
battery mode during a
power failure)

Cold-start operation supported

Appearance Attractive gray tower UPS

CERTIFICATIONS

Certifications Tested to CE, IEC 60601-1 (Medical), Class B (Emissions)

WARRANTY

Product Warranty
Period (International)

2-year limited warranty

Product Warranty
Period (Mexico)

2-year limited warranty

Product Warranty
Period (Puerto Rico)

2-year limited warranty

Related Items

Optional Products

Related Model Description Qty.

BP36V15-2U BP36V15-2U - External Battery Pack for UPS System 1

BP36V42-3U BP36V42-3U - External Battery Pack for UPS System 1

More information, including related products, owner's manuals, and additional technical specifications, can be found online at

www.tripplite.com/en/products/model.cfm?txtModelID=3868.

Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous

improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.