Page 1
SmartPro 1.5kVA Line Interactive UPS, Tower,
Serial, 230V
MODEL NUMBER: SMARTINT1500
Description
Tripp Lite's SMARTINT1500 intelligent, line interactive UPS system protects servers, networking accessories
and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal
batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA/940 watt
power handling capability supports a variety of networking, telecom and various other application types,
including the support of multiple network workstations. Includes a total of 6 IEC320-C13 outlets. Supports remote monitoring of UPS and site power conditions
via built-in DB9 serial and DB9 contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in
audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with
optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from
transient surges. Attractive, small-footprint tower.
Features
1500VA/940 watt power handling capability supports a variety of networking, telecom and various other application types
Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures
Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 230V nominal output over an input voltage
range of 165-277V
Includes 1 DB9 serial and 1 DB9 contact closure monitoring port for remote monitoring of UPS status and site power conditions
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery
voltage and battery capacity
PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
Includes 6 UPS-supported outlets
Notification of system status via 5 LEDs and multi-function audible alarms
Wall mountable with UPSWM wallmount bracket
Attractive small footprint beige tower housing
Hot-swappable/user replaceable batteries allow on-site battery replacement
Highlights
1.5kVA / 1500VA line interactive
tower UPS system
230V nominal output during
brownouts to 165V and
overvoltages to 277V
Front panel status LEDs with
load and battery capacity level
display
2 DB9 ports; 2 C13 to C14
cables; Hot-swap batteries
C14 inlet; 6 C13 outlets
Package Includes
SMARTINT1500 UPS System
2 IEC-320 C13 to C14 power
cables
2 DB9 monitoring cables
PowerAlert unattended shutdown
and UPS/Power monitoring
software
Instruction manual with warranty
information
1 / 5
Page 2
Network-grade AC surge suppression
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
Specifications
SELECTOR
Selector Type UPS SYSTEMS
General Info
Product Group UPS SYSTEMS
TAA Compliant No
OVERVIEW
UPS Family SmartPro Network
UPS Type Line-Interactive
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 940
Power Factor 0.6
Nominal Output Voltage(s)
Supported
220V; 230V; 240V
Nominal Voltage Details 230v inverter nominal output voltage
Frequency Compatibility 50 / 60 Hz
Output Voltage Regulation (Line
Mode)
-15%, +8%
Output Voltage Regulation (Battery
Mode)
+/- 5%
Output Receptacles (6) C13
Included Output Power Cables Includes 2 C13 to C14 output power cables
Hot-Swap PDU options PDUBHV10 (2U / 8 C13 outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
INPUT
Rated input current (Maximum Load) 6.5A
2 / 5
Page 3
Nominal Input Voltage(s) Supported 230V AC
UPS Input Connection Type C14 inlet
Input Circuit Breakers 10A
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 7 min. (940w)
Half Load Runtime (min.) 20 min. (470w)
DC System Voltage (VDC) 36
Battery Recharge Rate (Included
Batteries)
Less than 4 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge
RBC53
Battery Access Battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 166 to 277
Overvoltage Correction Input voltages between 243 and 277 are reduced by 12%
Undervoltage Correction Input voltages between 191 and 215 are boosted by 10%
Severe Undervoltage Correction Input voltages between 165 and 190 are boosted by 22%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible Alarm Audible alarm indicates power-failure and low-battery conditions
Alarm Cancel Operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 480
UPS AC Suppression Response
Time
Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Installation Form Factors Supported
with Optional Accessories
Wallmount (UPSWM - tower mounting kit)
Primary Form Factor Tower
3 / 5
Page 4
UPS Power Module Dimensions
(hwd, in.)
12.8 x 7.5 x 9.2
UPS Power Module Dimensions
(hwd, cm)
32.4 x 19 x 23.5
UPS Power Module Weight (lbs.) 38.6
UPS Power Module Weight (kg) 17.5
UPS Shipping Dimensions (hwd / in.) 18.2 x 12 x 13.8
UPS Shipping Dimensions (hwd /
cm)
46.4 x 30.5 x 34.9
Shipping Weight (lbs.) 43.2
Shipping Weight (kg) 19.6
UPS Housing Material Polycarbonate
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 204
Battery Mode BTU / Hr. (Full Load) 435.8
AC Mode Efficiency Rating (100%
Load)
94%
COMMUNICATIONS
Communications Interface DB9 Serial; Contact closure
Network Monitoring Port Description
Supports detailed monitoring of UPS and site power conditions; contact closure communications via 2nd DB9 port
(2 total)
PowerAlert Software Included
Communications Cable 2 DB9 cables included
LINE / BATTERY TRANSFER
Transfer Time 2-4 milliseconds
Low Voltage Transfer to Battery
Power (Setpoint)
165
High Voltage Transfer to Battery
Power (Setpoint)
277
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure)
Cold-start operation supported
High Availability UPS Features Hot swappable batteries
4 / 5
Page 5
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia);
Tested to IRAM (Argentina)
UPS Certification Details EMI approvals 62040
WARRANTY
Product Warranty Period
(International)
2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto
Rico)
2-year limited warranty
APPLICATIONS
UPS Applications Network/Server
© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.
Specifications are subject to change without notice. Photos may differ slightly from final products.
5 / 5
Loading...