Tripp PDUMV32HVNETLX Product Data Sheet

7.4kW Single-Phase Switched PDU w/LX Platform
Interface, 230V Output, IEC 309 32A Blue, 10 ft.
Cord, 0U, TAA

MODEL NUMBER: PDUMV32HVNETLX

Highlights

●

20 C13 and 4 C19 230V outlets
distribute clean power to
connected rack equipment

●

Built-in Java-free HTML5-based
LX Platform interface allows you
24/7 remote access

●

Remote power monitoring and
control reduces on-site visits
and maintenance costs

●

10 ft. power cord with IEC 309
32A Blue (2P+E) input connects
to compatible AC source

●

Digital ammeter for on-site load
monitoring helps prevent power
overloads

0U PDU distributes, monitors and manages single-phase power in an IT or industrial environment.

Features

0U PDU Distributes, Monitors and Manages Network-Grade AC Power

Recommended for data centers, server rooms and network closets, this 0U vertical PDU provides
advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock
out power to each outlet. You can more efficiently manage network power consumption and properly
balance loads without having to visit the site. Reducing the number of on-site visits can help lower the cost
of data center maintenance.

24 Outlets Dispense Clean Power

During normal operation, 24 individually controllable outlets—20 C13 and four C19—distribute AC power
to connected equipment. Each 230V outlet is accompanied by an LED that illuminates when the outlet is
ramped up and ready to be used. The outlets are split into two load banks, each protected by a circuit
breaker that trips if the bank’s connected load exceeds its maximum load rating. Plug-lock insert sleeves
are included to prevent connected cables from becoming accidentally dislodged.

Digital Load Meter Helps Prevent Potentially Expensive Overloads

A digital ammeter reports the load for each outlet bank separately and the total connected load.
Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of
overload that could lead to costly downtime or damaged equipment. The firmware can be easily upgraded
to ensure the PDU continues to perform at its best as connected equipment adds new features.

Built-In LX Platform Network Management Card Allows Remote Access 24/7

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU
status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports
10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2
modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported
include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and
NTP. The 0U PDU can receive IP address assignments via DHCP server (automatic) or static (manual)
method.

Easy to Install Vertically in an EIA-Standard 19 in. Rack

The 0U PDU mounts vertically using the included toolless mounting buttons or the included brackets.
Spare buttons are also included. Use the included PDUMVROTATEBRKT kit to install the PDU with

Applications

●

Powering a data center with
server racks running mission­critical applications

●

Monitoring power loads from
various computers, switches,
servers and other networking
equipment

●

Maintaining a computer network
in a commercial or industrial
facility

Package Includes

●

PDUMV32HVNETLX 7.4kW
Single-Phase Switched PDU

●

(24) Plug-lock insert sleeves

●

Rack-mounting hardware

●

Spare mounting buttons

●

PDUMVROTATEBRKT
mounting bracket accessory

●

Owner’s manual

1 / 3

outlets facing the rear for better airflow or equipment access. A 10-foot cord with IEC 309 32A Blue
(2P+E) input plug connects the single-phase PDU to a compatible AC power source, generator or
protected UPS system.

TAA-Compliant for GSA Schedule Purchases

The PDUMV32HVNETLX is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases.

2-Year Warranty

The PDUMV32HVNETLX is backed by a 2-year warranty, ensuring reliability and performance.

Specifications

OVERVIEW

UPC Code 037332202352
PDU Type Switched

OUTPUT

Output Capacity Details 7.7kW (240V), 7.4kW (230V), 7kW (220V), 6.7kW (208V), 6.4kW (200V) / 32A total capacity; 16A max per

Frequency Compatibility 50 / 60 Hz
Output Receptacles (20) C13; (4) C19
Output Nominal Voltage 230
Overload Protection Two 20A circuit breakers protect 12 outlets each
Customized Load Management

Receptacles

INPUT

PDU Input Voltage 230
Recommended Electrical Service 32A 230V
Maximum Input Amps 32.0
PDU Plug Type IEC-309 32A BLUE (2P+E)
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05
Input Phase Single-Phase

USER INTERFACE, ALERTS & CONTROLS

breakered outlet bank; 16A max per C19 outlet; 10A max per C13 outlet

Each outlet is individually controllable via remote interface

Front Panel LCD Display Digital display reports output amps in 3 separately metered loading segments (BANK 1: Outlets #1-12; BANK 2:

Front Panel LEDs 24 power availability LEDs confirm power off/on status for each built-in outlet
Switches Pushbutton control scrolls visual load meter display from bank 1, bank 2 and band 1&2 combined

Outlets #13-24; BANK 3: All outlets combined)

2 / 3