MTP/MPO to 8xLC Fan-Out Patch Cable, 40 GbE,
40GBASE-SR4, OM4 Plenum-Rated, Push/Pull
Tab, Magenta, 5 m (16.4 ft.)
MODEL NUMBER: N845-05M-8L-MG
Connects 4 10Gb duplex LC devices to a 40Gb MTP port on a network switch. Designed for high-density
connections between 40GBASE-SR4 network equipment.
Description
The five-meter N845-05M-8L-MG MTP/MPO to 8xLC Fan-Out Patch Cable supports 40 Gb Ethernet
speeds and is designed for high-density connections between 40GBASE-SR4 network equipment. With
one male MTP/MPO and eight male LC connectors, this OM4-rated multimode fiber optic fan-out cable
supports various multi- and single-fiber connections. It fully transmits 40GBASE-SR with four fibers
transmitting at 10 Gbps in each direction. Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and
QSFP28 100GBASE-SR4 connections.
Highlights
●
Push/pull tab connectors
install/remove with one hand
●
Plenum-rated jacket for
connecting in ceilings, walls and
ducts
●
Base-8 Fiber compatible with
both QSFP+ 40GBASE-SR4
and QSFP28 100GBASE-SR4
connections
●
Magenta color for easy OM4
identification
●
Slim, space-saving uniboot
design for neat cable
management
●
Premium-grade ceramic ferrule
designed for fast applications
Package Includes
●
N845-05M-8L-MG MTP/MPO to
8xLC Fan-Out Patch Cable,
Magenta, 5 m
Push/pull tab connectors are easily accessible in high-density data center applications and make the
cable easy to install and remove with one hand. The magenta-colored N845-05M-8L-MG features a
premium-grade ceramic ferrule for 10 GbE and faster applications. The slim, space-saving uniboot design
makes cable easier to manage. The plenum-rated jacket is perfect for connecting high-speed network
components in ceilings, walls and ducts. The sturdy plastic housing is built to last a long time.
Features
OM4-Rated for 40 Gb Ethernet Applications
●
Connects 4 10Gb duplex LC devices to a 40Gb MTP port on a network switch
●
Designed for high-density connections between 40GBASE-SR4 network equipment
●
Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 connections
●
Multimode fiber optic fan-out cable supports various multi- and single-fiber connections.
●
Fully transmits 40GBASE-SR with four fibers transmitting at 10 Gbps in each direction
●
Magenta-colored for identification as an OM4 cable
1 / 3
MTP/MPO and LC Connectors with Push/Pull Tabs
●
1 male MTP/MPO and 8 male LC connectors
●
Push/pull tab connectors easy to install and remove with one hand
Error-Free Signal Transfer
●
Premium-grade ceramic ferrule for 10 GbE and faster applications
●
Slim, space-saving uniboot design makes cable easier to manage
●
Plenum-rated jacket for connecting in ceilings, walls and ducts
●
Sturdy plastic housing built to last a long time
Specifications
INPUT
Cable Length (ft.) 16.4
Cable Length (m) 5
PHYSICAL
Shipping Dimensions (hwd / in.) 9 x 7 x 0.5
Shipping Dimensions (hwd / cm) 22.86 x 17.78 x 1.27
Shipping Weight (lbs.) 0.21
Shipping Weight (kg) 0.10
Color Magenta
ENVIRONMENTAL
Operating Temperature Range -4 TO 140 F (-20 TO 60 C)
Storage Temperature Range -4 TO 140 F (-20 TO 60 C)
COMMUNICATIONS
Network Speed 10Gbps / 40Gbps / 100Gbps
CONNECTIONS
Side A - Connector 1 12-STRAND MTP (FEMALE)
Side B - Connector 1 (8) LC DUPLEX (MALE) WITH PULL/PUSH TAB
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
2 / 3
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3 / 3
Loading...