Tripp N235-001-SH-6AD Product Data Sheet
Cat6a Straight-Through Modular Shielded In-Line
Snap-In Coupler w/90-Degree Down-Angled Port
(RJ45 F/F), TAA
MODEL NUMBER: N235-001-SH-6AD
Fully shielded coupler with 90° angled port connects two Cat6a cables to provide feed-through patching
with standard data wallplates. Ideal for premise wiring, telecommunications, data networking and Ethernet
connections.
Highlights
●
90° down-angled RJ45 port for
easy installation in tight spaces
●
Protective shielded housing
reduces EMI/RFI interference
●
50-µinch gold-plated contacts on
RJ45 jacks
●
Keystone design for use with
standard data wallplate
●
Backward compatible with Cat6,
Cat5e and Cat5 LANs
Package Includes
●
N235-001-SH-6AD Cat6a
Straight-Through Modular
Shielded In-Line Snap-In
Coupler (RJ45 F/F)
Description
Strengthen your high-speed network with Tripp Lite’s N235-001-SH-6AD Cat6a Straight-Through Modular
Shielded In-Line Snap-In Coupler (F/F). It connects two Cat6a patch cords to create one longer cable. Its
keystone design is perfect for convenient feed-through patching when used with a standard data wallplate
(such as Tripp Lite’s N042-001-WH). One RJ45 port is angled down at a 90-degree angle for easy
installation in hard-to-reach spaces. Built for ultra-fast performance, this is an ideal coupler when setting
up premise wiring, telecommunications, data networking and Ethernet connections.
Compatible with all Cat6a cables, the N235-001-SH-6AD’s protective metal housing is fully shielded to
reduce EMI/RFI interference that can damage or degrade data. This coupler features straight-through
wiring and 50-µinch gold-plated contacts designed to resist corrosion. The N235-001-SH-6AD is UL-listed
and meets all requirements for EIA/TIA Category 6A compliance. It’s also backward compatible with Cat6,
Cat5e and Cat5 LANs.
Features
Strengthens Your High-Speed Network
●
Ideal for premise wiring, telecommunications, data networking and Ethernet connections
●
Connects 2 Cat6a patch cables for a longer cable run
●
Keystone design for easy snap-in installation in standard data wallplates (such as Tripp Lite’s N042001-WH)
●
Compatible with all Cat6a cables
1 / 2
●
Backward compatible with Cat6, Cat5e and Cat5 LANs
Superior Construction for Superior Performance
●
90° down-angled RJ45 port for easy installation in hard-to-reach spaces
●
Fully shielded metal housing cuts down on EMI/RFI interference that can damage or degrade data
●
50-µinch gold-plated contacts resist corrosion and improve conduction
●
Features straight-through wiring
●
UL-listed
●
Meets all EIA/TIA Category 6A requirements
TAA-Compliant
●
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
PHYSICAL
Shipping Dimensions (hwd / in.) 5 x 4 x 0.5
Shipping Dimensions (hwd / cm) 12.70 x 10.16 x 1.27
Shipping Weight (lbs.) 0.04
Shipping Weight (kg) 0.02
Color Silver
ENVIRONMENTAL
Operating Temperature Range 14 TO 140 F (-10 TO 60 C)
Storage Temperature Range -40 TO 154.4 F (-40 TO 68 C)
Relative Humidity 10 TO 90% RH, NON-CONDENSING
CONNECTIONS
Side A - Connector 1 RJ45 (FEMALE)
Side B - Connector 1 RJ45 (FEMALE)
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2 / 2
Loading...