Tripp B150-1A1-DVI Product Data Sheet

DisplayPort to DVI over Cat5/6 Active Extender
Kit, Pigtail-Style Transmitter/Receiver,
Video/Audio, 1080/60p, Up to 125-ft.

MODEL NUMBER: B150-1A1-DVI

Transmitter and receiver work in tandem to convert a DisplayPort signal to DVI and extend it via Cat5e/6
cable to a projector, monitor or television up to 125 ft. away. Ideal for digital signs, schools and trade
shows.

Highlights

●

Supports high-definition video
resolutions up to 1920 x 1080
(60 Hz)

●

Supports 24-bit True Color (8
bits per channel) and stereo
audio

●

Included USB Micro-B cables
supply power to both units

●

Works with all operating
systems

●

Plug and play—no software or
drivers to install

●

HDCP 1.3 compliant

System Requirements

●

Computer with DisplayPort
output port*

●

Display with DVI-D input port

Description

The B150-1A1-DVI DisplayPort to DVI over Cat5/6 Active Extender Kit includes a transmitter unit and a
receiver unit that work in tandem to convert a DisplayPort audio/video signal to DVI and then extend it to a
projector, monitor or television up to 125 feet away. The kit is ideal for digital signs, trade shows,
presentations, classrooms, churches, retail settings and other applications where the video source is
located farther than convention cables allow.

One Cat5e/6 cable connects the transmitter and receiver (for best results, use 24 AWG solid-wire Cat5e/6
cable, such as Tripp Lite’s N202-Series). A built-in DisplayPort plug connects the transmitter to the
source, while a built-in DVI-D single-link plug connects the receiver to the display. Included USB Micro-B
cables supply power to the units via USB ports on the source and display or USB wall chargers. No
external power supplies are needed.

The B150-1A1-DVI can extend a high-definition 1920 x 1080 (60 Hz) signal up to 125 feet. In addition to
crystal-clear video, including 24-bit True Color (8 bits per channel), the kit delivers full, rich stereo. LEDs
on the RJ45 ports indicate when the units are receiving power and a DVI signal from the source. Built-in
equalization control lets you fine-tune the image on the DVI display. Easy to set up with no software or
drivers to install. Compatible with all operating systems. Compliant with the Federal Trade Agreements
Act (TAA) for GSA Schedule purchases.

Features

Converts DisplayPort Signal to DVI, Extends It Up to 125 Ft.

Package Includes

●

Transmitter unit

●

Receiver unit

●

Screwdriver for adjusting
equalization

●

(2) USB Micro-B cables, 3 ft.

●

Owner’s manual

1 / 3

●

Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings

●

Extends a high-definition 1920 x 1080 (60 Hz) signal up to 125 ft.

●

Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire
Cat5e/6 cable, such as Tripp Lite’s N202-Series)

●

Supports 24-bit True Color (8 bits per channel) and stereo audio

●

Built-in equalization control lets you adjust the image on the display

●

HDCP 1.3 compliant

Easy to Set Up and Use

●

Plug-and-play engineering—no software or drivers to download and install

●

Works with all operating systems

●

Built-in cables connect transmitter to DisplayPort source and receiver to DVI-D display

●

Included USB Micro-B cables provide power to the units

●

LEDs indicate when the units are receiving power and sharing a signal

TAA Compliant

●

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications

PHYSICAL

Shipping Dimensions (hwd / in.) 1.730 x 7.870 x 5.950
Shipping Dimensions (hwd / cm) 4.39 x 19.99 x 15.11
Shipping Weight (lbs.) 0.4900
Shipping Weight (kg) 0.22
Color Black

COMMUNICATIONS

Max 1024 x 768 Range (ft) 150
Max 480P Range (ft) 150
Max 1440 x 900 Range (ft) 150
Max 1080i Range (ft) 150
Max 1080P Range (ft) 125
Max 480i Range (ft) 150
Max 640 x 480 Range (ft) 150
Max 800 x 600 Range (ft) 150
Max 1600 x 1200 Range (ft) 150

2 / 3