Tripp B126-1A1-U-MCRO Product Data Sheet

Micro-HDMI to HDMI over Cat5/Cat6 Active
Extender Kit, 1080p @ 60 Hz, USB Powered, Up
to 125-ft., TAA

MODEL NUMBER: B126-1A1-U-MCRO

Transmitter and receiver work in tandem to extend an HDMI audio/video signal via Cat5e/6 cable from a
Micro-HDMI source to an HDMI display up to 125 ft. Ideal for digital signs, schools and trade show
presentations.

Description

The B126-1A1-U-MCRO Micro-HDMI to HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter
unit and a receiver unit that work in tandem to extend an HDMI audio/video signal from a Micro-HDMI
source to an HDMI projector, monitor or television. The kit is ideal for digital signs, trade shows,
presentations, classrooms, churches, retail settings and other applications where the video source is
located farther than conventional cables allow.

The transmitter’s built-in Micro-HDMI cable connects to the audio/video source, and the receiver’s built-in
HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results, use 24 AWG
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). Each unit is powered by an included USB
Micro-B to USB-A cable, which must be connected between the unit and a USB port on the source,
display or USB wall charger. You can also connect an optional HDMI monitor to the transmitter’s local port
with a user-supplied HDMI cable, such as Tripp Lite’s P568-Series.

Highlights

●

Supports high-definition video
resolutions up to 1080p (@ 60
Hz)

●

Supports stereo audio and
HDCP

●

Works with all operating
systems and HDMI sources

●

Plug and play—no software,
drivers or external power supply

●

Built-in equalization control lets
you adjust monitor image

System Requirements

●

Laptop, Ultrabook™, tablet or
other source with Micro-HDMI
port

●

Display with HDMI port

Package Includes

●

Transmitter unit

●

Receiver unit

●

(2) USB Micro-B to USB-A
cables, 3 ft.

●

Screwdriver for adjusting
equalization

●

Owner’s manual

The B126-1A1-U-MCRO can extend a 1080p (@ 60 Hz) signal up to 125 feet with full, rich stereo. Built-in
RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization
control lets you fine-tune the image quality at each remote display. Easy to set up with no software or
drivers to install. Works with all operating systems and HDMI sources.

Features

Extends HDMI Audio/Video Signals to an HDMI Display

●

Extends a 1080p (@ 60 Hz) signal up to 125 ft.

1 / 3

●

Ideal for digital signs, trade shows, presentations, classrooms, churches and retail settings

●

Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire
Cat5e/6 cable, such as Tripp Lite’s N202-Series)

●

Supports stereo audio and HDCP

●

Built-in equalization control lets you adjust the image on the remote display

Easy to Set Up and Use

●

Plug-and-play engineering—no software, drivers or external power supply

●

Powered via included USB cables

●

Units connect quickly to source and display with built-in cables

●

Optional local HDMI monitor connects to transmitter with user-supplied HDMI cable

●

LEDs indicate when units are receiving power and a signal from the source

●

Works with all operating systems and HDMI sources

TAA-Compliant

●

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications

PHYSICAL

Shipping Dimensions (hwd / in.) 7.870 x 5.590 x 1.730
Shipping Dimensions (hwd / cm) 19.99 x 14.20 x 4.39
Shipping Weight (lbs.) 0.4900
Shipping Weight (kg) 0.22
Color Black

COMMUNICATIONS

Max 1024 x 768 Range (ft) 125
Max 480P Range (ft) 125
Max 1440 x 900 Range (ft) 125
Max 1080i Range (ft) 125
Max 1080P Range (ft) 125
Max 480i Range (ft) 125
Max 640 x 480 Range (ft) 125
Max 800 x 600 Range (ft) 125
Max 1600 x 1200 Range (ft) 125
Max 720P Range (ft) 125

2 / 3