Tripp B021-000-19-SH User Manual

WARRANTY

REGISTRATION:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

1U Short-Depth Rackmount Console

with 19” Display

For KVM Switch or Server

Model: B021-000-19-SH

1. Introduction 2

Owner’s Manual

2. Important Safety Instructions 2

3. System Components & Compatibility 3

4. Features 3

5. Rackmounting 4

6. Connection 4

7. LCD OSD Conﬁ guration 5

8. Storage & Service 5

9. Speciﬁ cations 6

10. Warranty & Warranty Registration 6

Español 7

Français 13

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

1. Introduction

The B021-000-19-SH 1U Short-Depth Rackmount Console features an integrated LCD panel, full keyboard and touch pad in a 1U rackmountable housing. It is designed for use with a server or a KVM switch with PS/2 or USB console port connectors. The B021-000-19-SH’s compact design permits installation in short-depth enclosures. Features include:

Rackmount console combines a 19-in. LCD display, keyboard and touch pad in an integrated 1U rackmountable housing• Sleep mode is automatically invoked when the monitor cover is closed• Supports resolutions of up to 1024 x 768 pixels• Can be used with any device that includes PS/2 or USB console port connectors• Rackmountable in short-depth enclosures down to 19 in.•

2. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation and operation of this product. Failure to comply may invalidate the warranty and cause property damage and/or personal injury.

Installation Warnings

Install the Console in a controlled indoor environment, away from moisture, temperature extremes, ﬂ ammable liquids and gasses, conductive • contaminants, dust and direct sunlight.

Operate the Console at indoor temperatures between 32° F and 104° F (0° C and 40° C).• When connecting the Console to the facility’s power supply circuit, ensure that the circuit is not overloaded.•

Rackmount Warnings

Ensure there is adequate airﬂ ow within the rack.• Mount the Console evenly within the rack to eliminate potentially hazardous uneven mechanical loading conditions.• Ensure that all rackmount equipment is reliably grounded.•

Connection Warnings

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support • equipment or to signiﬁ cantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a ﬂ ammable anesthetic mixture with air, oxygen or nitrous oxide.

Ensure that the cables used with the Console are not close to any sources of electrical noise interference such as ﬂ uorescent lights, HVAC systems or • motors.

Ensure that the distance between any computer and the Console does not exceed 33 ft. (10m).•

Maintenance Warnings

The Console does not require routine maintenance. There are no user-serviceable parts inside. Only authorized service personnel should open the case for • any reason.

Disconnect the unit from AC input power before servicing. •

3. System Components & Compatibility

Package contains:

B021-000-19-SH 1U Short-Depth Rackmount Console• Mounting Hardware• USB Cable Kit with PS/2 Adapter• AC Power Adapter• User’s Guide•

The B021-000-19-SH supports most servers and KVM switches with PS/2 or USB console port connectors.

4. Features

Handle: Pull to slide the Console out; push to slide in.

LCD Monitor: After sliding the Console out, ﬂ ip up the cover to access the LCD monitor, keyboard and touch pad.

Keyboard

Slide Release: Locks the drawer closed when the Console is

not in use and prevents it from accidentally sliding open. To slide the Console out, release it by moving this tab sideways.

Rackmounting Brackets: Included with the B021-000-

19-SH; install at each corner of the unit. For rackmounting instructions, see Section 5.

Three-Button Touch Pad: The left and right buttons

perform as standard left and right mouse buttons. The middle button can be used in conjunction with the scroll pad to scroll through a computer screen

LCD Display Controls: Control the position and picture

settings of the LCD display. Also includes a power LED to indicate the status of the LCD panel. See Section 7, LCD OSD Conﬁ guration, for details.

Railway Release Tabs: When the Console is fully extended,

the railway system will lock. Push the release tabs to unlock the Console so that it can be slid back in.

Console Port Section: The included cable kit required to

connect the Console to your server or KVM switch plugs in here.

Power Socket: The included Power Adapter plugs in here.

+ 4 hidden pages