Triplett LVPRO-PROBE Specsheet

“Nails it
every time!”

TESTS BOTH CABLES AND DEVICES

PRINT RESULTS

3 MODELS... WEB UPGRADEABLE

LENGTH-RLQ PAC K

ALERT LEDS

TONE LOCATOR

PORT BLINK

SPEAKER

SPEAKER 7.1

WALL JACK

CABLE TEST PACK

ID

ID

ALERT LEDS

TONE LOCATOR

PORT BLINK

SPEAKER

SPEAKER 7.1

WALL JACK

CABLE TEST PACK

ID

ID

BATTERY LOAD

CCTV SIGNAL

PHONE VOLTS

PoE VOLTS

10/100/1000

LENGTH-RLQ PAC K

ALERT LEDS

TONE LOCATOR

PORT BLINK

SPEAKER

SPEAKER 7.1

WALL JACK

CABLE TEST PACK

1

CABLE TEST

+ 6 APPS

ORDER

LVPRO 1

+ LENGTH-RLQ PAC K

2

CABLE TEST

+ 6 APPS

MODEL 1 TEST APPS

CABLE TEST PACK (ALL TYPES)

CABLE

TEST

ID

CTR

SUB

FRFL

SR

SL

SBR

SBL

ALERT

Cable diagram, Pass/Fail, Delay, Skew, Ohms

1% HQ Length included with LVPro 2 and 3.

WALL JACK MAPPERS AND SMART REMOTES*

Choose ID’ing only or test/ID in one pass.

RJ45 and coax. Requires Remote kit(s).

SPEAKER POPPER

Locate speakers by audibly “popping” them.

Alligator clips included with all LVPRO Models.

SPKR 7.1 ID# MAPPER *

Especially designed to properly map and

label A/V speaker wires. Requires remote kit.

PORT BLINK CABLE DETECTION

Locate a cable connection to a switch port by

blinking the switch’s Link LED.

TONE CABLE DETECTION *

Place a tone on one end and detect it on the

far end. Requires remote tone probe.

ALERT LEDS (LINKS, VOLTS)

Two LEDs quickly alert you to an active switch

connection or voltage on the line.

MODEL 2 ADDS THIS TEST APP

LENGTH-RLQ PACK

Get perfect length, all wire types. Use built-in VOP

values or calibrate with your cable. Adds length

1

readout to Cable Test App (cable length, distance

2

to open or short). Also includes RLQ (below).

Included with the Length-RLQ APP, Return

R

Loss Quality tests for load mismatches that

affect the wire’s power and data transfer capability.

* See web for accessories

ORDER

LVPRO 2

3

ORDER

LVPRO 3

CABLE TEST

+ LENGTH-RLQ PAC K

+ 12 APPS

MODEL 3 ADDS THESE TEST APPs

10/100/1000 DETECTION/DISPLAY

Plug into any active port (computer, switch, VoIP,

access point) and display its capabilities.

PoE / PAIRS

Detect PoE voltage and display its amplitude and
location on the cable (midspan, endspan or both).

CCTV / Vpp (peak to peak voltage)

CCTV systems require a minimum of 1Vpp to

DVR. Measure and display Vpp of video signal.

PHONE

Detect central office telephone connections.

Display voltage and cable location (up to 4 phones).

LOADED BATTERY TEST

Test alarm system and other backup

batteries by doing a loaded battery test.

PRINT

PRINT UP TO 250 REPORTS

Store for later printing up to 250 tests (all

cable types). USB and software included.

ACCESSORIES

COAX IDs

LVP-COAX

RJ45/COAX IDs

LVP-RJ45COAX

RJ45 IDs

LVP-RJ45

SMART RJ45 IDs

TEST/ID ONE PASS

SPEAKER IDs

LVP-SPEAKER

MODEL 3

SHOWN

TONE PROBE

LVP-P

PATENTS PENDING
DESIGNED AND
ASSEMBLED IN THE USA

Cable and Device Testers

Cable and Device Testers

7003 132nd Place SE, Newcastle, WA 98059 USA

+1.425.917.8380

●

FAX [phone]

●

[e-mail]

c

2013 Byte Brothers, Inc.