Page 1
All-in-one IP, AHD 2.0, TVI 3.0, & CVI 3.0 Camera Tester with Built-In DHCP
TM
CamView
iP Pro-D
iP Pro-D
No need to buy multiple testers or download Apps!
¢Works with the most popular IP & Analog cameras*, up to 8MP!
¢High Definition, 1080P display
¢Built-in DMM
Works with or without a network. Built-in DHCP server
¢
allows you to:
- Set & Assign IP addresses to cameras
- Auto-detect IP settings on networks
- Ping, Sniff, List Subnet
Powers both IP and Analog cameras
¢
¢H.265 IP Camera Tests including:
- Discover the Camera
- View Camera’s Video
- Configure Camera’s Parameters, etc.
¢Ethernet Tests including:
- 10M/100M/1G Ethernet Link Test
- Packet Loss Test
- Ethernet Loop Detection, etc.
¢
Multiple cable tests including TDR
¢RS485 PTZ Control Test
¢Analog NTSC/PAL and HD Video Generator
¢Screen Shot, Video Recording, Playback & Reports
*IP Camera must be ONVIF compliant.
Analog camera must be AHD 2.0, CVI 3.0, or TVI 3.0.
MSRP $599.99
Test Equipment Depot - 800.517.8431 -
PN: 8073
99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Page 2
CamView
Technical Specications
TM
iP Pro-D
iP Pro-D
TESTER TECHNICAL SPECIFICATIONS
PORTS
Network Ports (2) 10M/100M/1G RJ45 ports (Blue is POE Out; Green is POE In)
I/O Ports (2) BNC ports (Video IN and Video OUT), (1) RS485, (1) Audio In, (1) USB, (1) Reset
IP CAMERA TEST FEATURES
Protocols ONVIF 2.4.1 or higher, RTSP, RTP
Ethernet Tests 10M/100M/1G Ethernet link test, loop detect, Ethernet traffic flow monitor, link quality
IP Configurations Static IP / DHCP client / DHCP server
IP Camera Tests Discover camera, real-time video, camera configuration, PTZ control, audio test, full
AHD, TVI, HD-CVI, & ANALOG CAMERA TEST FEATURES
SD Signal Format NTSC / PAL
HD Video Formats AHD 2.0, HD-TVI 3.0, and HD-CVI 3.0
Resolutions D1, 720P, 1080P
Signal Level 1Vpp
Camera Tests Real-time video, PTZ control, audio test, full-screen preview, and 8x digital zoom;
PTZ CONTROLS
Protocol More than 30 protocols including Dahua, Pelco-D/P, Samsung, Panasonic, Lilin, Yaan
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
DETECTION
TDR Tests 0~150m network cable length measurement (resolution 1m), cable pair status
PTZ Test Data Monitor to detect RS485 Communication from control room console to camera
POE Tests PD test (tester accepts POE power, displays voltage)
Network Analysis Sniff, list subnet, ping
Video Generator Generate PAL / NTSC and 1080P video signals of various test patterns
Record Playback Support local playback of recorded video and view screenshots
SYSTEM
Screen 4.0 inch TFT 800*RGB*480(WVGA) resolution, 16.7M color, backlight brightness
Operation Method Power key, 12 control keys, QWERTY flip-open keyboard with 45 keys
Auto Power Off Disable / 5~60 minutes
Keyboard Tone Enable / Disable
Software Supports online upgrades
POWER
Power Input POE source or POE injector (Green RJ45 port)
POE Injector Input AC100~230V 50~60Hz, output 48V/15w
Battery Dedicated battery, user replaceable, 7.4V lithium-ion polymer battery, capacity
Power Output POE (802.3af, 802.3at) (Blue RJ45 port), DC12V 2A
Time Charging time 3~4 hours, max working time 10 hours
OTHER
Internal Storage 8GB flash
LED Light (2) 35lm LED lights
Working Temperature -10°C ~+55°C
Working Humidity 30%~90%
Dimensions 190mm x 113mm x 37mm
Weight 1.6kg
Button
test
screen preview, and 8x digital zoom; snapshot, record video (recording original data
stream), store ONVIF camera reports
snapshot, record video
etc.
PSE test (tester provides POE power, displays power)
adjustable
22.2Wh
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
DMM TECHNICAL SPECIFICATIONS
Item Range
DCV 2V, 20V, 200V, 600V ±19999 0.1mV ±0.1%+8*
ACV True RMS 20V, 200V, 600V ±1999 1V ±1.2%+3
DC Current 20mA, 200mA, 2000mA ±19999 1uA ±0.1%+8*
AC Current
True RMS
Resistance
Capacitance 2nF, 20nF, 200nF, 2uF, 20mF,
Diode Forward
Voltage
Continuity
20mA, 200mA, 2000mA ±1999 1uA ±1.2%+3
2KΩ, 20KΩ, 200KΩ, 2MΩ,
20MΩ
200uF, 2mF, 20mF
2V 0~1999.9 0.1mV ±0.1%+20
2kΩ 0~1999.9 0.1Ω ±0.1%+20
Range
0~19999 0.1Ω ±0.1%+8**
0~1999 1pF ±4%+5
*2VDC, 20mA DC. For the range of 2VDC and 20mA DC, no load reading should be subtracted.
**When measuring small resistors, resistance of the probes should be subtracted.
Item Parameters Description
Reading
Resistance, Capacitance, Diode
Measurement Protection
Fuse Size: 5mm x 20mm, 2A/250V
Electrical Insulation >1.5KV mA, COM, V/W are
<400V Connecting to voltage beyond
Item Parameters Description
Factory calibration temperature 25 ±5°C
Temperature Stability <100ppm/ °C Except for large current mea-
User Self-calibration Range ±1%
Data Rate 5 readings per second
2 readings per second
0.1~5 readings per second
Analog Meter Refresh Rate 20 ~ 40fps Except for Capacitance Testing
Data History Chart X Axis 1s/div, 5s/div,
Waveform Display Mode X Axis 10ms/div
Waveform Refresh Rate 1 per second No synchronization
AC Measurement Frequency
Range
Diode Current Measurement 1mA ±5%
Breakdown Prompt Threshold 30mV
Conductivity Test Current 1mA ±5%
Conductivity Beeper Threshold 30 OHMS
Conductivity Beeper Response
Time
Current Measurement
Resistance
Data Recording Frequency 2 records/second
Data Record Length 0.5s~9999h
25s/div
0Hz ~ 1000Hz Harmonics above 1KHz will
<2mS
20mA Grade: 5W ±5%
200mA Grade: 1W ±10%
2000mA Grade: 0.1W~0.2W
Minimum
Resolution Accuracy
the range will cause the meter to
be damaged permanently.
electronic measurement
connectors, which are insulated
from all other interfaces.
surement
DC Voltage, DC Current,
Resistance Measurement, Diode
testing, Continuity
AC Voltage & AC Current Testing
Capacitance Testing
Automatic Adapt
induce error
Visit us at www.TestEquipmentDepot.com
Loading...