Trinus Systems CMR24WATT, CMR24WATR Users Manual

WARRANTY SERVICE CARD
WARRANTY CARD
purchase.
WARRANTY PERIOD
200_
will correct, free of charge, any defect in the unit resulting from
Features and specifications are subject to change without
PRODUCT NAME Wireless Transceiver System PERIOD MODEL NAME CMR-24WAT
PURCHASE DATE . . 200_
. .
From the
date of
CMR24WAT
WIRELESS TRANSMITTER SYSTEM
CUSTOMER’S ADDRESS : NAME :
TEL :
AGENT’S ADDRESS : NAME :
TEL :
* Be sure to fill in blanks when the unit is sold
We grant 1 year warranty on the product commencing on the date of purchase. Within the warranty period, the manufacturer
faults in materials or workmanship, either by repairing or replacing the entire unit as manufacturer may choose. This warranty does not cover: damages due to improper use, normal wear and tear, or defects that have a negligible effect on the value or operation of the unit. The warranty is void if repairs are undertaken by unauthorized persons and if original Trinus parts are not used. To obtain service within the warranty period, bring in or ship the complete unit with your purchase invoice to a Trinus Customer Service Center.
User’ s Guide
Read this user’s guide carefully for safe operation and proper use of the product .
notification.
WARNING
O
diti
Before installation, check power supply and voltage to avoid
CAUTION :
Changes or modifications not expressly approved by
These limits are designed to provide reasonable protection against
Frequency Range
2400MHz 2483MHz
tri
t
This device complies with Part 15 of the FCC Rules.
* Please turn off the power before connecting or
disconnecting any cables.
- Do not immerse in water or keep in humid areas
- Do not place near TV, speakers, or other electronic devices
­hazards
- Do not apply force or shock to the unit
- Do not disassemble the unit
TECHNICAL SPECIFICATIONS
Operating Voltage TX: 3.7VDC RX: 12VDC
~
Operating Range Up to 1800 feet at the open field
* Note : Operating Range can be different
according to the environment
Operating Temperature 10 ~ 110 °F LED Indicators TX: low battery warning, Out of Range,
Talk On, Mute
RX: Charging indicator, Talk On
peration is subject to the following two con
ons : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
the party responsible for compliance could void the user s authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Jacks 8 pin RJ-45 for power, audio out, and
gger ou
Battery
Capacity: Lithium-Li-Polymer 3.7V
DC/1400mA Charging time: 3 hours Talk Time: Max. 13 Hours
1 10
- Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other anten na or transmitter.
Loading...
+ 4 hidden pages