Trinus Systems CCR24PNAR, CCR24PNAT Users Manual

WIRELESS TRANSCEIVER SYSTEM

User Guide :: CCR24PNA

User Guide:CCR24PNA

---------------------------------------------------------

•Read this user guide carefully for safe operation and proper use of the product.

•Features and specifications are subject to change without notification.

1

Safety Approval

FCC ID: ROYCCR24PNAR

ROYCCR24PNAT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that

may cause undesired operation.

CAUTION : Changes or modifications not expressly approved by the party

responsible for compliance could void the user s authority to operate this
device.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy, and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, theuser is
encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.

14

Safety Approval

Industry Canada
IC ID: 5479A-CCR24PNAR
5479A-CCR24PNAT
Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference, including interference that may cause

undesired operation of the device.
The term “IC:” before the certification/registration number only signifies that registration
was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met.
It does not imply that Industry Canada approved the equipment.

15

BOX CONTENTS

• 1. Transmitter (TX)

• 2. Receiver (RX)

• 3. Plug-In Microphone (MONO)

• 4. Mounting Bracket for Receiver with
screws

• 5. Rechargeable Li-Ion Polymer
Battery

• 6. Leather Pouch

• 7. External antenna

• 8. Desktop charger for transmitter

• 9. AC Power supply for desktop
charger

• 10. Charger Stand for Desktop Charger

• 11. RF Main Cable

• 12. In-car MIC

• 13. User Guide

2

DESCRIPTION - Transmitter

6

1

3

4

2

5

9

7

10

1 LED Indication 6 TX Power

On/Off

2 Built in MIC 7 Battery Cover
3 Microphone Jack 8 Mute Button

4 FCC , IC , cULus

9 Talk Button

Labels

5 Serial Number

Label

10 Mode Selection

Button

8

3

DESCRIPTION - Receiver

4

1

6

2

3

5

1 Antenna connection 5 Serial Number Label

2 Talk On (Green LED) 6 Main Cable Connection

3 Battery Charger Status

7 FCC , cULus , IC Labels

(Green + Red LED)

4 Charging PIN/Matching

ID

#2 Talk On LED

#3 Charging Status

7

When TX triggers the
recording of the system ,
Green LED light on

Red LED-In Charging

4

Green LED-Fully charged