Triner Scale 1200g High Precision Scale User Manual
UG Version 1.2_12-30-13
1200g High Precision Scale
Userʼs Guide
1200g High Precision Scale
Legal for Trade
Includes RS-232 interface port
Triner Scale & Mfg.Co., Inc.
8411 Hacks Cross Road
Olive Branch, MS 38654
(800) 238-0152
www.trinerscale.com
© 2013 Triner Scale. All rights reserved.
!!!! CALIBRATION WARNING !!!!
Calibration AND inspection of calibration properties
is prohibited unless done so by
a qualified scale technician.
User’s Guide | 1200g
1
Table of Contents
Introduction........................................................2
Specifications ....................................................2
Set Up ...............................................................3
Key Functions ....................................................4
Operation...........................................................5
Zeroing the Indicated Weight.....................5
Taring........................................................5
Weigh an Item in a Container ....................6
Accumulate Weights..................................6
View Audit & Calibration Counts................7
Adjusting the Parameters...................................7
Parameters Charts.............................................8-10
Output of the Weight..........................................11
Output to a Receipt Printer ........................11
Output to a PC ..........................................12
Output to a Remote Display ......................13
Error Codes .......................................................14
Weighing Unit Conversions................................15
!!!! NOTICE !!!!
The CZ 1200 High Precision scale is a very sensitive and
delicate electronic instrument.
For accuracy of weighments, certain factors regarding
location of use must be taken into consideration, i.e.,
- Place on very stable surface
- Away from air movement
- Away from vibrations
- Away from electronic noise
- Away from magnetic fields.
User’s Guide | 1200g
2
Introduction
The CZ Precision balance is a highly accurate, fast
and versatile general purpose balance scale.
Construction includes a stainless steel weighing
pan on an ABS base assembly.
The keypad keys are light touch and the display is
large easy to read liquid crystal (LCD). The LCD
features a white LED backlight and includes a
percentage of capacity bar graph.
Operating features include automatic zero tracking,
and an accumulation facility that allows the count to
be stored and recalled as an accumulated total.
Specifications
Capacity: 1200g x 0.1g
NTEP Certified, Legal for Trade
Accuracy Class II
Interface: RS-232 Output
Stabilization Time: 2 Seconds typical
Operating Temperature: 10°C~25°C / 50°F~77°F
Power Supply: (external) 9V/800mA AC adapter
Calibration: Automatic External
ADC: Sigma delta
Internal Counts: 600,000 or 1,200,000
Display: Backlit LCD, 6 digits, loading bar graph
Housing: ABS Plastic
Pan: Stainless Steel
Dimensions: 180mm W x 220mm D x 85mm H
User’s Guide | 1200g
3
Set Up
PRECAUTIONS AND REQUIREMENTS
FOR PRECISION WEIGHING
Precision scales should be placed in a location that
will not degrade the accuracy.
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The tables or floor must be
rigid and not vibrate. Do not place near vibrating
machinery.
Avoid unstable power sources. Do not use near
large users of electricity such as welding equipment
or large motors.
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
Avoid air movement such as from fans or opening
doors. Do not place near open windows. Keep the
scales clean.
Do not stack material on the scales when they are
not in use.
THE CZ PRECISION SCALE
Level the scale by adjusting the four feet. The scale
should be adjusted such that the bubble is centered
and the scale does not rock from corner to corner.
Attach the adapter to connector on the side of the
scale, plug into standard 110VAC outlet.
User’s Guide | 1200g
4
Key Functions
ZERO/ENTER
ZERO: Sets zero point for all subsequent weighing.
ENTER: For setting parameters or entering other
functions.
TARE
Tares the scale. Stores the container weight in
memory as a tare value, subtracts the tare value
from the total/gross weight and shows the resulting
net weight.
PRINT/ESC
PRINT: To print the results to a PC or printer using
the optional RS-232 interface.
ESC: Return to normal operation when the scale is
in a parameter setting mode, avoids saving recently
entered changes.
UNIT/MODE
UNIT: Selects either grams, pounds, carat ,ounce
etc. for the weighing unit when weighing mode.
MODE: Press during start up self-checking to
access parameter setting mode. When in settings
mode, press to proceed through parameters.
S
Press the S key during self-checking to display
the number audit operations.
P
Press the P key during self-checking to display
the number of calibrations performed. When the
counter becomes full, it will start over at 0.
ON/OFF
Power on, power off.
Loading...