Trim-Tex Decorative L Bead User Manual [en, es]

3
4
"
R.
1
"
1
"
DECORATIVE L BEAD INSTALLATION INSTRUCTION
HOW TO INSTALL
Style 651 L BeadStyle 651 L Bead
Miter
Miter
Support
Support
Begin by roughly snipping your bead 6" longer then your
1. desired length. Before cutting your inside or outside corners with a miter saw, be sure to use a support under the mud leg for accurate miter cuts. For a double / " bead, you can use
5
8
two / " pieces of drywall for your miter support. Next, dry fit your mitered corners and adjust as necessary.
3.
Finish the installation by mudding, sanding, and painting the bead as you normally would any corner bead. To boost the performance and strength of your drywall compound, use Trim-Tex's high performance MUD-MAX drywall compound additive (stock # 850 for Gallon & 851 for 16 oz Bottle).
5
8
Use Trim-Tex 700/710 Adhesive Caulk
Use Trim-Tex 700/710 Adhesive Caulk
on the Return Leg
on the Return Leg
2.
When installing your bead be sure to use
Adhesive Caulk Trim-Tex 847 Spray Adhesive
mud leg every 6" with T has installation instructions that you can refer to to caulk your miters and butt joints and then clean any excess caulk before finishing.
on the return leg as shown above, and
1
2
/ " divergent staples. he 847 can also
on the mud leg.
Trim-Tex 700/710
Staple the
. Don't forget
(Spanish)
INSTRUCCIONES PARA LA INSTALACION
1. Comience por cortar el esquinero 6" mas de la medida deseada. Antes de hacer los cortes, soporte la pieza para obtener uniones mas presizas. Para el esquinero decorativo doble , puedes utilizar dos tiras de de tablaroca para soporte. Pruebe las piezas y ajuste si es necesario.
2. Cuando instale sus esquinas, asegurese usar el pegamento 700/710 de Trim-Tex en la extremidad no perforada y el pegamento 847 de Trim-Tex en la extremidad perforada. Engrape la extremidad perforada cada 6" con grapas de x . Tambien se puede referir a las instrucciones del pegamento 847. No olvide agregar el pegamento 710 a las uniones y limpiar el exceso antes de acabar.
3. Termine la instalacion con el material para tablaroca y pinte de igual manera que se recomienda a cualquier otra esquina en paredes interiores. Para una mejor adicion del material para tablaroca a la esquina decorativa, utilize el aditivo Mud-Max de Trim-Tex (#850/galon y #851/botella de 16 oz.)
55
/" /"
88
For Ultimate Adhesion use Trim-Tex #700/710 Adhesive Caulk!For Ultimate Adhesion use Trim-Tex #700/710 Adhesive Caulk!
Contact us today! Phone: 800-874-2333 / Fax: 800-644-0216 / www.trim-tex.com
© Copyright 2007 Trim-Tex Inc. All Rights Reserved
1
1
2
/" /"
2
Loading...