
Rear camera
LED Flash
Docking Contact Pins
External antenna port
Battery cover lock
Battery cover lockBattery cover lock
TYPE-C interface Handstrap hole

1. Battery Charging
• Charge with travel charger
Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert
the large plug end of the USB data cable into the travel charger plug, and then insert the
travel charger plug into a power outlet to charge.
• Charge with USB data cable
Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert
the large plug end into the USB port of the computer to charge.
Note: During normal charging, the home screen status bar will display the charging icon
when screen is on.
When the charging is completed, the home screen status bar will display the full
battery icon when screen is on.
2. Install SIM card, memory card, battery
Power off the device before installing
or removing the SIM card, MicroSD
card or battery.
Flip the device to its rear, follow the
directions shown in Figure 1 and push
the back cover lock to the open position,
and remove the battery cover.
Install the SIM card and MicroSD card
according to the battery compartment
label instructions, as shown in Figure 2.
Figure 1

SIM2 SIM1 Micro SD
Figure 2
• Face the SIM card metal contacts downwards and push into the slot. Take note on the direc-
tion of the notched corner.
• Face the MicroSD card metal contacts downwards and push into the slot. Take note on the
direction of the notched corner.
• Align the contacts of the battery with the terminals of the battery compart ment and put in the
battery gently.
• After the battery is installed, replace the battery compartment cover and push the back cover
lock to locked position to secure the battery compartment cover.