TriGem Pinole User Manual

TriGem

1055 Shingil-Dong, Ansan-City, Kyunggi-Do, Korea

Tel : [phone] Fax : [phone]

Motherboard Specification (Confidential)

TriGem Computer, Inc.

Product Model

: Micro-ATX Motherboard (Fresno)
Title : Functional Specification of Motherboard
Date : May 8, 2001 (Version 0.94)

1. Form Factor

Ÿ Small uATX Form Factor
Ÿ 7.3”×9.3”×1.6T (4 Layers)

2. Main Core Chipset

Ÿ Intel 810(E) Chipset

- Intel 82810(E) Memory Controller Hub (BGA-421p)

- Intel 82801AA I/O Controller Hub (EBGA-241p)

Ÿ Super I/O: ITE8702 (PQFP-128p)
Ÿ Audio: AC97 CODEC-based subsystem

- Crystal CS4299 (TQFP-48p)

Ÿ Flash BIOS: SST49CF002A 2MB FWH (PLCC-32p)
Ÿ Clock Generator

- ICS9250-16 (SOP-56p)

Ÿ DC to DC converter

- HIP6021 for PWM Controller (SOP-24p)

3. Processor

Ÿ 370-pin ZIF Socket (PGA-370s)
Ÿ Intel Pentium-III and Celeron Processor
Ÿ 100/133MHz FSB with an integrated 128K/256K L2 Cache

4. System Memory

Ÿ Built-in Two SDRAM Channels (2 DIMM Sockets)
Ÿ PC100/133 supported (just running in 100MHz)
Ÿ Expansion: Up to 512MBytes with two 256MB modules

5. BIOS

Ÿ Phoenix BIOS in 2MB Flash Memory
Ÿ PCI2.2, PnP1.0a, APM1.2, SMBIOS2.3, CDROM Boot

1.01, UUID, AGP2.0, ACPI 1.0b

6. Expansion Slots

Ÿ AGP, PCI, and AMR supported

- Three PCI slots (PCI 2.2 specification compliant)

- One AMR slot

7. Rear I/O Port

Ÿ Serial Port: One Dsub-9 Connectors for COM1
Ÿ Parallel Port: Dsub-25 Connector for LPT1
Ÿ VGA: Dsub-15 Connector for Monitor
Ÿ USB Port: Up to 2 USB Connection

- Stack USB Connector for Two USB Ports and

- One Headers for an USB located in Front-side

Ÿ PS/2: One Stack PS/2 Connector for Mouse & Keyboard
Ÿ Multimedia Port

- Type-1: L_IN+MIC+L_OUT+Joystick (Standard)

- Type-2: L_IN+MIC+SPK

8. Header Connectors

p I/O Device

Ÿ Storage device

- Two E-IDE connector: 40pin Header (up to ATA66)

- One FDD connector: 34pin Header

Ÿ Audio Sound

- CDROM sound: One 1*3 Locking Header

- Video sound: 1*4 Locking Header (Option)

- SPK_OUT: 1*3 Locking Header (Option)

- Headphone: 1*5 Header (Option)

- SPDIF: 1*4 Header (Option)

- 2nd MIC: 1*4 Header (Option)

- 2nd CDROM Audio: 1*3 Locking Header (Option)

Ÿ Joystick / USB Header

- 2*10 Header for Joystick and One USB Port

Ÿ Power Supply Connector

- 20pin ATX Connector

p Indicator Connector: 2*10 Header

Ÿ Power LED: 1*3 Connection (3-step mode)
Ÿ HDD LED: 1*2 Connection
Ÿ Key Lock: 1*2 Connection
Ÿ Power, Reset & Sleep Button: Each 1*2 Connection
Ÿ Speaker: 1*4 Connection
Ÿ 1*8 Header dual Foot-Print for HP

p Power Management-based Connector

Ÿ Three FAN Connector: CPU, Power Supply, and System

- FAN ON/OFF supported

Ÿ One Chassis Intrusion: 1*2 Locking Header (Option)
Ÿ Modem Wake-up: 1*3 Locking Header (Option)

9. Miscellaneous parts

Ÿ Battery: Coin Type (CR2032)

Ÿ Speaker: Piezo Type

Format#: TGDFBD08-A
Board Development Team, R&D Center

- 1 -

Prepared by Hyenki Baek

E-mail Address : [e-mail]

TriGem

1055 Shingil-Dong, Ansan-City, Kyunggi-Do, Korea

Tel : [phone] Fax : [phone]

Motherboard Specification (Confidential)

TriGem Computer, Inc.

Product Model

: Micro-ATX Motherboard (Fresno)
Title : Connector and Jumper Description on Motherboard
Date : May 8, 2001 (Version 0.94)

Speaker-Out (CN117)

1st CD Audio (CN44)

2nd MIC-Input (CN83)

SPDIF (CN81)

2nd CD Audio (CN47)

Headphone-Out (CN116)

Video Audio (CN45)

Modem Wakeup (CN51)

PC/PCI (CN23)

Chassis Intrusion (CN52)

Indicator (CN73)

Configuration Jumper

(J1,J2,J3,J8,J5,J4,J6,J7)

Front USB/Joystick (CN39)
COM2 Port (CN25)

CPU FAN (CN53)

Floppy Disk (CN9)

ATX P/S (CN7)
PS FAN (CN55)

Chassis FAN (CN54)

2nd IDE (CN11)

1st IDE (CN10)

Format#: TGDFBD08-A
Board Development Team, R&D Center

- 2 -

Prepared by Hyenki Baek

E-mail Address : [e-mail]

TriGem

1055 Shingil-Dong, Ansan-City, Kyunggi-Do, Korea

Tel : [phone] Fax : [phone]

Motherboard Specification (Confidential)

TriGem Computer, Inc.

Product Model

: Micro-ATX Motherboard (Fresno)
Title : Jumper Setting Description
Date : May 8, 2001 (Version 0.94)

Ÿ OEM/ODM Configuration Jumper (J1,J2,J3)

Configure the features according to ODM/OEM customized function including LOGO display.

Ÿ FDD Writing-Protection Jumper (J4)

Jumper

Features

Ÿ SETUP Configuration Jumper (J5)

Jumper

Features

Ÿ CMOS Clear Jumper (J6)

Jumper

Features

Ÿ FDD Writing-Protection Jumper (J7)

Jumper

Features

Ÿ Password Configuration Jumper (J8)

Jumper

Features

Enable to write data into Floppy Disk

Enable to enter to CMOS setup menu

Normal operation

Enable the primary Audio Codec built in.

Enable to check the system password

J1 J2 J3 J8 J5 J4 J6 J7

1-2

Disable to write data into Floppy Disk

1-2

Disable to enter to CMOS setup menu

1-2

Clear all data stored in CMOS memory

1-2

Disable the primary Audio Codec built in.

1-2

Disable to check the system password

3
2
1

2-3

2-3

2-3

2-3

2-3

Format#: TGDFBD08-A
Board Development Team, R&D Center

- 3 -

Prepared by Hyenki Baek

E-mail Address : [e-mail]