
Detailed Specifications
& Technical Data
2A
Tributaries 2A is an entry-level audio pair made by hand in Orlando, FL. The 2A is a Siamese audio pair constructed of 2 precision
twisted pairs of solid 24AWG OFC conductors and dual shielding. These cables are stocked in ½ meter to 4 meter lengths with
custom lengths available.
• Hand-soldered in Orlando Florida, USA
• 24AWG / solid OFC copper conductors
• Dual shielded to lower the noise floor
• Gold-plated solid brass connectors with aluminum covers
• Highly flexible PVC jacket
• Available in ½ meter to 4 meter and custom lengths
The 2A is terminated with red & white RCA connectors. The wires are soldered to solid gold-plated brass RCA connectors. The
connection is protected with a crimped strain relief and low profile aluminum connector covers that are painted black and have
colored rings for signal identification.
LDPE –Low Density Polyethlene

Detailed Specifications
& Technical Data
2A
While Tributaries has made every reasonable effort to ensure the accuracy of these specifications, information contained herein
may be subject to error and omission and to change without notice. Tributaries provides these specifications on an “AS IS” basis,
with no representations or warranties, whether express, statutory or implied.
The cable will be packaged to preclude the inducement of damage due to handling and transportation, and will be in accordance
with the best commercial practices available. Shipping containers will be constructed as to eliminate any possible damage to the
cable due to shipment.
Re-Sealable Plastic Clamshell
8X10 Zip-Lock all lengths
10 each, except for 3 & 4meters where qty is 5
*Available in custom lengths upon request