Page 1
Assembly Instructions
ITEM NO.: 31633
1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!
2. Unfold the arms to the correct place to match the FRAME (I).
3. Thread the NIPPLE (H) onto COUPLEN (G). Until tighten!
4. Place the FRAME (I) onto the fixture careful. Make sure all of the NIPPLE (H)
hade insert the tubings on the FRAME (I).
5. Place the COVER (J) onto the FRAME (I). Then secured by the BALL NUT (K).
6. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.
7. Follow the wattage label on the glass hold and install correct wattage and type
bulb (no provide) onto the socket.
8. For mounting and wiring step please follow the mounting instruction sheet
enclosed.
Page 2
Assembly Instructions
ITEM NO.: 31633/31634
PICTURE 1 PICTURE 2 PICTURE 3
PICTURE 4 PICTURE 5 PICTURE 6 PICTURE 7
STEP-BY -STEP ASSEMBLY GUIDE
1. CAREFULLY REMOVE FIXTURE OUT OF THE BOX.(PICTURE 1)
2. THREAD THE LOOP ONTO THE NIPPLE ON THE FIXTURE.
. PUT THE BOTTOM FRAME ON TOP OF A PIECE OF CLOTH OR CARPET AND AVOID ANY
S.(PICTURE 2)
TURE 3)
HOWN.(PICTURE 4)
7. PPLE AND FRAME WITH BOTTOM CAP AND BALL NUT AS SHOWN.(PICTURE 6)
XTURE ASSEMBLY IS COMPLETED.(PICTURE 7)
3
SCRATCHES ON THE FIXTURE
4. SPREAD OUT AND ADJUST ARMS EVENLY ON THE FIXTURE.(PIC
5. TREAD THE NIPPLE ONTO THE BOTTOM OF EACH ARM AS S
6. CAREFULLY INSERT THE NIPPLE INTO EACH TUBE ON THE FRAME.(PICTURE 5)
SECURE NI
8. FI
Loading...