Triarch 31916 User Manual

ASSEMBLY AND MOUNTING INSTRUCTION

For 31916

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and e
identify all parts prior to building the unit. Each part is identified on the drawingfor reference.

DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item
for any reason. Please repack the unit using the original carton and inserts.

STEP 1:Unpack all the parts and
Classify them accor ding to the
illustration shown at the side.
Place the par ts on a scratchfree
surface;

STEP 2: Make sure the power is
turned Of f at the Ceiling junction
box where the fixture is to be
installed.Secure the cr oss bar to
the ceiling junction using the
junction box screws;

STEP 3: Use the wire nuts to
Connect positive and negative
wires. Connect the Ground wire
to the ground por t;

STEP 4: Secure the fixture to the
Ceiling Junction box using two
Brass;

STEP 5: Install the corr ect bulbs
(not provided);

STEP 6: Install the center rod to the fixture;
STEP 7:Install the glass to the glass shade with nut .Secure with bottom cap

and the finial.

Uni ver s al mount i ng bar

Fi x ture

Threaded Ni ppl e

Gl ass Shade

Glass Washer

Nut

Bottom Cap

Fi ni al