Triarch 31913 User Manual

ASSEMBLY AND MOUNTING INSTRUCTION

ase read the Assembly lnstr

Ple uction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawing for reference.

DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item
for any reason. Please repack the unit using the original carton and inserts.

STEP 1: Unpack all the parts and classify them according to the illustration shown at
the side. Place the parts on a scratch free surface;

STEP 2: Make sure the power is turned off at the the
junction box where the fixture is to be installed.

ecure the mounting strap to the ceiling junction box

S
using junction box screws;

STEP 3: Use the wire nuts to connect the positive
and negative wires. Connec

nction box ground port;

ju

STEP 4: Secure the canopy to the ceiling with the
knurled ring;

STEP 5: lnstall the loop to the colum;

TEP 6: lnstall center pipe and arms to the fixture

S
with nut and ball nut as shown;

STEP 7:Install the tempered glass by using the rub
washer and the cap nut screw in position;

TEP 8: Install the correct bulb(not prS

STEP 9: Install threaded nipple to the fixtur
Shade ,glass washer and nut . secure with botto

ap and finial

c
STEP 10: Install candle cover and fabric shade

as shown ;

TEP 11: InstaS

ll the correct bulbs(not provided).

For 31913

t the ground wire to the

ber

ovided) ;

e glass

m